Duke G-3-CBSS Thurmaduke 46" Gas Steam Table, Three 12" x 20" Wells, Stainless Body, Natural Gas or LP

Duke G-3-CBSS Thurmaduke 46" Gas Steam Table, Three 12" x 20" Wells, Stainless Body, Natural Gas or LP

DukeSKU: DUK-G-3-CBSS

  • Warranty · 1-yr Parts and Labor

Secure checkout

Apple Pay Diners ClubDiscoverGoogle Pay Mastercard Shop Pay Visa

Talk to an equipment specialist

Mon–Sat 8 AM–5 PM ET

Questions about size, power, delivery or a quote for several units?

Call

Highlights

  • 3 12" x 20" wells with 8" deep stainless steel liners
  • 3 individual burners with adjustable valves, radiation plates and safety pilots
  • Natural gas or propane, 1/2" IPS connection, gas pressure regulator included
  • 46" L x 25-1/2" D x 36" H on 6" adjustable stainless legs, 264 lb. listed
  • Stainless vented control panel with wire knob guards
  • 300 Series stainless steel body
  • UL EPH Classified and CSA Design Certified; 1 year parts and labor warranty per Duke

Specifications

ManufacturerDuke
Model NumberG-3-CBSS
SeriesThurmaduke Steamtable, Hot Food, Gas, Standard
TypeStationary Gas Steam Table
Weight264 lb.
Freight Class150
Length46"
Depth25-1/2"
Height36"
Wells3
Well Openings12" x 20" Die-Stamped
Well Liners12" x 20" Stainless Steel, 8" Deep
Fuel TypeNatural Gas or Propane, Specify at Order, High-Altitude Orifice on Request
Burners3, One per Well, Individual Adjustable Gas Valves, Galvanized Radiation Plates, Safety Pilots
Gas Connection1/2" IPS, Gas Pressure Regulator for Unit
Top16 Gauge 300 Series Stainless Steel, One Piece
Body300 Series Stainless Steel
Legs6" Polished Stainless Steel Adjustable Legs
Controls HousingStainless Steel Vented Control Panel, Wire Knob Guards, End Panels
Duke Options14 Gauge Tops, Robertshaw Thermostat, Adaptor Plates, Spillage Pans, Veneered Panels, Powder Coat Paint Colors, 7" or 10" Stainless or Maple Carving Boards, 1/2" Poly Cutting Surface, Foodshields, Trayslides
Not AvailableSliding Doors, Casters
CertificationsUL EPH Classified, CSA Design Certified
Warranty1 Year Parts and Labor

Resources & Documents

Specs

Manufacturer Duke
Model Number G-3-CBSS
Series Thurmaduke Steamtable, Hot Food, Gas, Standard
Type Stationary Gas Steam Table
Weight 264 lb.
Freight Class 150
Length 46 Inches
Depth 25-1/2 Inches
Height 36 Inches
Wells 3
Well Openings 12" x 20" Die-Stamped
Well Liners 12" x 20" Stainless Steel, 8" Deep
Fuel Type Natural Gas or Propane, Specify at OrderHigh-Altitude Orifice on Request
Burners 3, One per WellIndividual Adjustable Gas ValvesGalvanized Radiation PlatesSafety Pilots
Gas Connection 1/2" IPSGas Pressure Regulator for Unit
Top 16 Gauge 300 Series Stainless Steel, One Piece
Body 300 Series Stainless Steel
Legs 6" Polished Stainless Steel Adjustable Legs
Controls Housing Stainless Steel Vented Control PanelWire Knob GuardsEnd Panels
Duke Options 14 Gauge TopsRobertshaw ThermostatAdaptor PlatesSpillage PansVeneered PanelsPowder Coat Paint Colors7" or 10" Stainless or Maple Carving Boards1/2" Poly Cutting SurfaceFoodshieldsTrayslides
Not Available Sliding DoorsCasters
Certifications UL EPH Classified, CSA Design Certified
Warranty 1 Year Parts and Labor

Certifications

UL EPH Classified
CSA Design Certified
Call

Description

A 3-well gas hot food table with its own burner under every well, for kitchens that would rather hold food on gas than electric.

Duke Thurmaduke standard gas steam table, 6-well G-6-CBPG shown with optional maple cutting board, front view

The Duke Thurmaduke G-3-CBSS is a 46" stationary gas steam table with three 12" x 20" stainless steel liners, 8" deep. Every well has its own burner, adjustable gas valve, galvanized radiation plate and safety pilot, and a pressure regulator serves the whole unit. A stainless steel vented control panel with wire knob guards runs along the front. The body is 300 Series stainless steel on 6" adjustable stainless legs.

Will it fit · Will it hook up

Outside size
46" L x 25-1/2" D x 36" H; 264 lb. listed
Gas
Natural gas or propane, specified at order; 1/2" IPS connection; confirm BTU with us before install
Power
No electrical connection listed on the Duke sheet
Wells
3 die-stamped 12" x 20" openings, 8" deep stainless liners
Mobility
Stationary on legs; Duke does not offer casters or sliding doors on gas units

At high altitude, order the high-altitude choice and tell us your elevation so Duke can fit the right orifices.

Burner in every well

3 individual burners, each with its own adjustable gas valve and galvanized steel radiation plate, so you set each well separately.

Safety pilots

Each burner has a safety pilot, and a gas pressure regulator is supplied for the unit.

12" x 20" liners

3 die-stamped 12" x 20" openings in a one-piece 16 gauge 300 Series stainless top, over 8" deep stainless steel liners.

Vented control panel

A stainless steel vented control panel carries the knobs, protected by wire knob guards. End panels close the sides.

Body finish

300 Series stainless steel body on 6" polished stainless adjustable legs.

Delivery and setup

  • Inspect the crate for damage before you sign, and note any damage on the delivery receipt.
  • Ships by freight from Duke; Duke lists freight class 150 and about 264 lb. for this size.
  • Use a licensed gas installer for the 1/2" IPS gas connection, and make sure the gas type ordered matches your supply.
  • Duke warns not to store combustible materials on the bottom shelf of a gas unit.

Questions buyers ask

Natural gas or propane?

Either. Pick natural gas or propane when you order; there are also high-altitude versions of each. For high altitude, Duke needs your elevation.

What is the gas connection?

A 1/2" IPS gas connection, with a gas pressure regulator supplied for the unit.

How much heat does it put out?

There is one burner per well, 3 in all. Duke's documents print different BTU figures for this model, so ask us and we will confirm the rating with Duke before you size your gas line.

Can I put it on casters?

No. Duke states that casters and sliding doors are not available on the gas units. It stands on 6" adjustable stainless legs.

Are spillage pans included?

No. Spillage pans are a Duke option. The steam table brochure recommends vented spillage pans for wet heat on gas individual-well units.

What warranty does it have?

Duke lists a 1 year parts and labor warranty for Thurmaduke units.

3 BurnersOne burner and valve per well.
3 Wells, 12" x 20"8" deep stainless liners.
Natural Gas or LP1/2" IPS, regulator included.
UL EPH, CSA1-year parts and labor per Duke.

Specs

Manufacturer Duke
Model Number G-3-CBSS
Series Thurmaduke Steamtable, Hot Food, Gas, Standard
Type Stationary Gas Steam Table
Weight 264 lb.
Freight Class 150
Length 46 Inches
Depth 25-1/2 Inches
Height 36 Inches
Wells 3
Well Openings 12" x 20" Die-Stamped
Well Liners 12" x 20" Stainless Steel, 8" Deep
Fuel Type Natural Gas or Propane, Specify at OrderHigh-Altitude Orifice on Request
Burners 3, One per WellIndividual Adjustable Gas ValvesGalvanized Radiation PlatesSafety Pilots
Gas Connection 1/2" IPSGas Pressure Regulator for Unit
Top 16 Gauge 300 Series Stainless Steel, One Piece
Body 300 Series Stainless Steel
Legs 6" Polished Stainless Steel Adjustable Legs
Controls Housing Stainless Steel Vented Control PanelWire Knob GuardsEnd Panels
Duke Options 14 Gauge TopsRobertshaw ThermostatAdaptor PlatesSpillage PansVeneered PanelsPowder Coat Paint Colors7" or 10" Stainless or Maple Carving Boards1/2" Poly Cutting SurfaceFoodshieldsTrayslides
Not Available Sliding DoorsCasters
Certifications UL EPH Classified, CSA Design Certified
Warranty 1 Year Parts and Labor

Certifications

UL EPH Classified
CSA Design Certified

Payment & Security

Apple Pay Diners Club Discover Google Pay Mastercard Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

What Our Customers Say

Related Products

Recently viewed