Duke G-4-CBPG Thurmaduke 60" Gas Steam Table, 4 Wells, Standard, Paint Grip Steel Body

Duke G-4-CBPG Thurmaduke 60" Gas Steam Table, 4 Wells, Standard, Paint Grip Steel Body

DukeSKU: DUK-G-4-CBPG

    Secure checkout

    Apple Pay Diners ClubDiscoverGoogle Pay Mastercard Shop Pay Visa

    Talk to an equipment specialist

    Mon–Sat 8 AM–5 PM ET

    Questions about size, power, delivery or a quote for several units?

    Call

    Will it fit · Will it hook up

    Outside (W × D × H)60" × 25‑1/2" × 36"
    Gas10,000 BTU/hr
    Capacity4 Wells for 12" x 20" Pans
    ListedUL EPH Classified, Design Certified

    Highlights

    • 4 die-stamped openings for 12" x 20" pans with 8" deep stainless liners
    • 10,000 BTU/hr total from 4 individual burners with safety pilots and adjustable valves
    • 60" W x 25-1/2" D x 36" H on 6" polished stainless steel adjustable legs
    • One-piece 16-gauge 300 Series stainless steel top; gas pressure regulator included
    • Paint Grip Steel body and interior shelf
    • Natural or propane gas, specified when ordering; 1/2" I.P.S. connection
    • UL EPH Classified and Design Certified per the Duke spec sheet

    Specifications

    ManufacturerDuke
    Model NumberG-4-CBPG
    SeriesThurmaduke Steamtables, Hot Food, Gas, Standard
    TypeGas Hot Food Steam Table, Open Base
    Weight344 lb.
    FreightClass 150, 49.2 cu. ft. Crated
    Width60"
    Depth25-1/2"
    Height36"
    Legs6" Polished Stainless Steel, Adjustable
    Fuel TypeNatural Gas or Propane, Specify When Ordering
    Total BTU10,000 BTU/hr
    Burners4, Individual, with Safety Pilots and Adjustable Gas Valves
    Gas Connection1/2" I.P.S.
    RegulatorGas Pressure Regulator for Unit
    High AltitudeSpecify Elevation for High-Altitude Orifice
    Capacity4 Wells for 12" x 20" Pans
    Liners12" x 20" Stainless Steel, 8" Deep, Galvanized Steel Radiation Plates
    Top1-Piece 16-Gauge 300 Series Stainless Steel, Die-Stamped 12" x 20" Openings
    Body and Interior ShelfPaint Grip Steel
    ExteriorPaint Grip Steel
    Control PanelStainless Steel, Vented, Wire Knob Guards
    Control TypeIndividual Adjustable Gas Valves
    Duke Options14 Gauge Tops, Robertshaw Thermostat, Adaptor Plates, Spillage Pans, Veneered Panels, Powder Coat Paint Colors, 7" or 10" Stainless or Maple Carving Boards, 1/2" Poly Cutting Surface, Foodshields, Trayslides
    Not AvailableCasters, Sliding Doors
    CertificationsUL EPH Classified, Design Certified

    Resources & Documents

    Specs

    Manufacturer Duke
    Model Number G-4-CBPG
    Series Thurmaduke Steamtables, Hot Food, Gas, Standard
    Type Gas Hot Food Steam Table, Open Base
    Weight 344 lb.
    Freight Class 15049.2 cu. ft. Crated
    Width 60 Inches
    Depth 25-1/2 Inches
    Height 36 Inches
    Legs 6" Polished Stainless Steel, Adjustable
    Fuel Type Natural Gas or Propane, Specify When Ordering
    Total BTU 10,000 BTU/hr
    Burners 4, Individual, with Safety Pilots and Adjustable Gas Valves
    Gas Connection 1/2" I.P.S.
    Regulator Gas Pressure Regulator for Unit
    High Altitude Specify Elevation for High-Altitude Orifice
    Capacity 4 Wells for 12" x 20" Pans
    Liners 12" x 20" Stainless Steel, 8" DeepGalvanized Steel Radiation Plates
    Top 1-Piece 16-Gauge 300 Series Stainless SteelDie-Stamped 12" x 20" Openings
    Body and Interior Shelf Paint Grip Steel
    Exterior Paint Grip Steel
    Control Panel Stainless Steel, VentedWire Knob Guards
    Control Type Individual Adjustable Gas Valves
    Duke Options 14 Gauge TopsRobertshaw ThermostatAdaptor PlatesSpillage PansVeneered PanelsPowder Coat Paint Colors7" or 10" Stainless or Maple Carving Boards1/2" Poly Cutting SurfaceFoodshieldsTrayslides
    Not Available CastersSliding Doors
    Certifications UL EPH Classified, Design Certified

    Certifications

    UL EPH Classified
    Design Certified
    Call

    Description

    A 60-inch gas steam table that holds four 12" x 20" pans hot on a serving line, with no electrical hookup needed.

    Duke Thurmaduke standard gas steam table, 6-well unit with optional maple carving board shown, front view

    The Duke Thurmaduke G-4-CBPG is a standard gas hot food unit with 4 die-stamped 12" x 20" openings in a one-piece, 16-gauge, 300 Series stainless steel top. Each well has its own burner, adjustable gas valve, safety pilot and galvanized steel radiation plate under an 8" deep stainless liner, and the unit has one gas pressure regulator. Controls sit behind a stainless steel vented control panel with wire knob guards. The body and interior shelf are paint grip steel, on 6" polished stainless steel adjustable legs. Order it for natural or propane gas.

    Will it fit · Will it hook up

    Outside size
    60" W x 25-1/2" D x 36" H on 6" adjustable legs
    Gas
    10,000 BTU/hr total, 4 burners; 1/2" I.P.S. gas connection; natural or propane, specified when ordering
    Power
    No electrical connection is listed on the Duke sheet
    Pans
    4 openings for 12" x 20" pans; 8" deep stainless liners
    Mobility
    Stationary on legs; Duke does not offer casters or sliding doors on this gas unit
    Weight
    344 lb., freight class 150, 49.2 cu. ft. crated

    Measure doorways: the smallest outside dimension is the 25-1/2" depth.

    Burner per well

    Each of the 4 wells has its own burner, adjustable gas valve, safety pilot and galvanized steel radiation plate. Total input is 10,000 BTU/hr.

    One-piece stainless top

    The top is one piece of 16-gauge, 300 Series stainless steel with die-stamped 12" x 20" openings and 8" deep stainless liners.

    Gas pressure regulator

    A regulator for the unit and a 1/2" I.P.S. connection are standard. For high altitude, Duke asks for the elevation so it can supply the right orifice.

    Vented control panel

    Controls sit on a stainless steel vented control panel with wire knob guards that protect the knobs from bumps.

    Carving board options

    Add 7" or 10" stainless steel or maple carving boards, a 1/2" poly cutting surface, food shields or tray slides.

    Open storage base

    The paint grip steel body has end panels and an interior shelf on 6" polished stainless steel adjustable legs. Do not store combustible materials on the bottom shelf.

    Delivery and setup

    • Inspect the crate for damage before you sign, and note any damage on the delivery receipt.
    • The unit weighs 344 lb. per the Duke freight table (class 150, 49.2 cu. ft. crated), so plan for a liftgate or dock and two or more people.
    • Duke builds the unit for natural or propane gas: confirm your gas type when you order. Above normal elevation, give Duke the elevation for a high-altitude orifice.
    • Have a qualified gas installer connect the 1/2" I.P.S. gas inlet and check the regulator and pilots before service.
    • Keep combustible materials off the bottom shelf of this gas unit, as Duke warns on the spec sheet.

    Questions buyers ask

    Does it need natural gas or propane?

    Either one. Duke builds it for natural or propane gas, so specify the gas type when you order. The gas connection is 1/2" I.P.S.

    How many pans does it hold?

    It has 4 die-stamped openings for 12" x 20" full-size pans, each over an 8" deep stainless steel liner. Duke offers adaptor plates as an option for smaller pans.

    How much gas does it use?

    Duke lists 10,000 BTU/hr total for the 4-burner G-4-CBPG.

    Can I put it on casters?

    No. Duke states that casters and sliding doors are not available on its gas steam tables. The unit stands on 6" polished stainless steel adjustable legs.

    Does it come with a thermostat?

    Each well has its own adjustable gas valve. A Robertshaw thermostat is a Duke option.

    What does PG or SS mean in the model?

    Duke lists the PG model as the enameled version with a paint grip steel body and the SS model as the stainless steel version. This G-4-CBPG has a paint grip steel body.

    10,000 BTU/hr4 burners with safety pilots.
    4 Wells 12" x 20"8" deep stainless liners.
    Natural or LP Gas1/2" I.P.S. connection.
    UL EPH ClassifiedSanitation listing on the Duke sheet.

    Specs

    Manufacturer Duke
    Model Number G-4-CBPG
    Series Thurmaduke Steamtables, Hot Food, Gas, Standard
    Type Gas Hot Food Steam Table, Open Base
    Weight 344 lb.
    Freight Class 15049.2 cu. ft. Crated
    Width 60 Inches
    Depth 25-1/2 Inches
    Height 36 Inches
    Legs 6" Polished Stainless Steel, Adjustable
    Fuel Type Natural Gas or Propane, Specify When Ordering
    Total BTU 10,000 BTU/hr
    Burners 4, Individual, with Safety Pilots and Adjustable Gas Valves
    Gas Connection 1/2" I.P.S.
    Regulator Gas Pressure Regulator for Unit
    High Altitude Specify Elevation for High-Altitude Orifice
    Capacity 4 Wells for 12" x 20" Pans
    Liners 12" x 20" Stainless Steel, 8" DeepGalvanized Steel Radiation Plates
    Top 1-Piece 16-Gauge 300 Series Stainless SteelDie-Stamped 12" x 20" Openings
    Body and Interior Shelf Paint Grip Steel
    Exterior Paint Grip Steel
    Control Panel Stainless Steel, VentedWire Knob Guards
    Control Type Individual Adjustable Gas Valves
    Duke Options 14 Gauge TopsRobertshaw ThermostatAdaptor PlatesSpillage PansVeneered PanelsPowder Coat Paint Colors7" or 10" Stainless or Maple Carving Boards1/2" Poly Cutting SurfaceFoodshieldsTrayslides
    Not Available CastersSliding Doors
    Certifications UL EPH Classified, Design Certified

    Certifications

    UL EPH Classified
    Design Certified

    Payment & Security

    Apple Pay Diners Club Discover Google Pay Mastercard Shop Pay Visa

    Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

    What Our Customers Say

    Related Products

    Recently viewed