Edlund 270/115V Heavy Duty Electric Can Opener, 2-Speed, NSF, Stainless Steel, 115V
A heavy duty two-speed electric can opener for kitchens that open 100 to 200 cans a day.
The Edlund 270 is a 115 volt version of Edlund's Model 270 heavy duty electric can opener. It is Edlund's flagship opener for high-volume kitchens that open different can sizes. A two-speed motor, slot-machine style lever and stainless steel body are built for 100 to 200 cans per day, and the knife holder, knife, drive gear and shield come off without tools for cleaning.
High speed handles most cans. The slower speed is for difficult cans and helps prevent spills when opening smaller cans.
The knife holder, knife, drive gear and shield come off without tools for cleaning or replacement.
A slot-machine style lever needs minimal effort and cuts fatigue. The opener severs the lid in one full turn of the can.
Edlund recommends the 270 for 100 to 200 cans per day. A gear and shield keep splash-back out of the interior, and the base is sealed.
Precisely weighted and balanced, the 270 lifts even the heaviest #10 can to the knife. A sculpted base guides a full #10 can.
Edlund recommends the 270 series for 100 to 200 cans per day.
This is the 115 volt version. Plug it into a grounded outlet with the same voltage listed on the back of the opener. The Model 270 manual lists 115V, 1.5 amp, 50-60 Hz.
Unplug it first. Turn the knife holder latch, slide and lift off the knife holder, twist off the knife, then turn the shield a quarter turn to remove the shield and gear. Keep the knife clean so it turns freely; a knife bound by food will not shear the lid as designed.
Edlund says high speed is for most cans and low speed is for difficult cans. The slower speed also helps prevent spilling liquids from smaller cans.
Edlund warrants the Model 270 for three years from purchase against defects in material and workmanship. Knives and drive gears are parts that wear in normal use and are not covered.
Yes. Edlund calls the 270 its NSF certified heavy-volume electric can opener, and its catalog notes it is USDA accepted.
Specs
| Manufacturer | Edlund |
|---|---|
| Model Number | 270/115V |
| Product Code | 27000 |
| Type | Table-type heavy duty electric can opener |
| Voltage | 115 Volts |
| Amps | 1.5 Amps |
| Hertz | 50-60 Hz |
| Speeds | 2Normal 200-250 RPMLow 160-200 RPM |
| Recommended Usage | 100-200 cans per day |
| Overall Size | 6-3/4" x 11-1/2" x 10" |
| Shipping Dimensions | 13-3/4" x 10-5/8" x 11-3/8" |
| Shipping Weight | 20 lb. |
| Material | Heavy duty stainless steel |
| Tool-Free Removal | Knife holder, knife, drive gear and shield |
| Certifications | NSF |
| Country of Origin | Made in USA of US and imported components |
| USDA | USDA accepted |
| Warranty | 3 Years |
| Warranty Exclusions | Knives and drive gears and other parts replaced in normal use |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
