Edlund 625A Extra Heavy Duty Air-Powered Crown Punch Can Opener, Automatic Lid Removal, 3,000 Cans/Day
Edlund's heaviest duty stand-alone crown punch: it opens and de-lids up to 3,000 cans a day with one operator.
The Edlund 625A is an industrial air-powered crown punch with a P.L.C. driven alligator lid removal system. The claw grabs each lid and drops it into a receptacle, for greater operator safety with one operator. It needs 85 P.S.I. of clean, dry air at 1-1/2 to 2 C.F.M. and draws 0.5 amp at 115-230 volts AC. Dual two-hand safety controls and a micro switch protective cover add operator safety.
Have a clean, dry compressed air line at 85 P.S.I. ready where the opener will stand.
Opens each can in one stroke. Edlund rates the 625A for up to 3,000 cans per day.
A P.L.C. driven claw grabs each lid and drops it into a receptacle for sanitary, hands-off lid handling.
Dual safety controls need both hands, and a micro switch cover stops the opener when the door is open.
Tooled for one standard #10 round can. Knife, guard ring locator and blade retaining clip change for other standard sizes.
All heavy duty stainless steel construction; the entire unit can be washed down.
Crown punch blades are intentionally dull for a smooth can edge. Do not sharpen them; Edlund reconditions them at the factory.
Edlund specifies 85 P.S.I. at 1-1/2 to 2 C.F.M. Clean, dry air is required for all pneumatic crown punches.
Yes, for the P.L.C. lid removal control. Edlund lists a draw of 0.5 amp at 115-230 volts AC. Edlund also notes that the 625A requires part A807.
Yes. It arrives tooled for one standard #10 round can. Quick change tooling covers Edlund standard sizes 603 (#10), 600, 502, 404, 401, 400, 307, 303, 300, 214, 211, 202. Each size needs its own blade, guard ring locator and blade retaining clip.
No. Crown punch blades are intentionally dull to give a smooth can edge. Reconditioning is available through the Edlund factory.
Edlund warrants its products against defects in material and workmanship for one year from purchase. Knives and gears on can openers are not covered, and the unit goes back to the factory freight prepaid.
Edlund states all crown punch models are USDA accepted. The 625A sheet also lists NSF certification.
Specs
| Manufacturer | Edlund |
|---|---|
| Model Number | 625A |
| Edlund Product Code | 62700 |
| Type | Air-powered crown punch can opener |
| Recommended Volume | Up to 3,000 cans per day |
| Air Requirement | 85 P.S.I. at 1-1/2 to 2 C.F.M., clean dry air |
| Amps | 0.5 Amps |
| Voltage | 115-230 Volts AC |
| Safety Controls | Dual safety controls require two-hand operationMicro switch protective cover stops operation when the door is open |
| Standard Tooling | Tooled for one standard #10 round can (603, 6-3/16 in. diameter) with knife and guard ring locator |
| Other Can Sizes | Quick change option; Edlund standard sizes 603 (#10), 600, 502, 404, 401, 400, 307, 303, 300, 214, 211, 202 |
| Lid Removal | P.L.C. driven alligator claw grabs the lid and drops it into a receptacle |
| Required Part | Edlund part A807 required |
| Blade | J blade not recommended for 625A |
| Construction | All heavy duty stainless steel; entire unit can be washed down |
| Case Weight | 260 lb. |
| Case Cube | 24 cu. ft. |
| Certifications | NSF, USDA Accepted |
| Country of Origin | Made in U.S.A. of U.S. and imported components |
| Warranty | 1 Year Limited |
| Warranty Terms | Edlund: defects in material and workmanship for one year from date of purchase; purchaser returns the unit to the factory, freight prepaid |
| Warranty Exclusions | Knives and gears on can openers are not covered |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
