Edlund EDV-12C 12" Pro Series Meat Slicer, Medium Duty, 1/3 HP, 115V
A 12-inch countertop slicer for delis and kitchens that slice meat and cheese for part of the day.
The Edlund EDV-12C is the 12" medium duty model in the Edvantage Pro Series. A 250 W / 1/3 HP ventilated motor drives a hardened, chromium-plated steel blade by belt, and a built-in two-stone sharpener keeps the edge keen. Edlund rates it for about 2 hours of meat or 30 min of cheese slicing a day. The anodized aluminum and stainless steel slicer has a removable carriage, sealed housing and top-mounted switches.
A two-stone sharpener (assembly SH012) mounts on the slicer to re-sharpen the hardened chromium-plated steel blade.
The carriage comes off only with the thickness gauge at 0, so the blade stays covered while you clean.
A blade cover micro switch stops the slicer if the guard tie rod is removed, and a low voltage release relay keeps it off after a power outage.
Sealed housing, a wide gap between blade and housing, and a removable slice deflector make wipe-downs faster.
250 W / 1/3 HP continuous-rated motor drives the blade by belt, with top-mounted switches.
Edlund rates it for about 2 hours of meat or 30 min of cheese slicing a day. It is the medium duty 12" model in the Pro Series. For all-day slicing Edlund offers the 13" EDV-13.
A 115V, 60 Hz single-phase grounded outlet. It comes with a UL listed cord and plug. The manual says to connect it to a 110 volt, 60 hertz circuit.
The thickness dial goes from 0 to 1/2". The carriage travels 9.7" per stroke.
Clean the blade with denatured alcohol, set up the built-in sharpener, and let the blade run against the grinding stone for 30 to 40 seconds to raise a burr, then hone it. Clean the stones afterward.
Unplug it, set the dial to 0, unscrew the carriage locking knob and lift off the carriage. The blade guard and slice deflector come off for washing. Never put the base in water.
Edlund warrants its slicers against defects in material and workmanship for one year from the date of purchase. The Pro Series brochure shows cULus Listed and UL EPH NSF/ANSI 8 marks.
Specs
| Manufacturer | Edlund |
|---|---|
| Model Number | EDV-12C |
| Series | Pro Series 12" Medium Duty Slicer |
| Product Code | 31200 |
| Unit Weight | 47.5 lb. |
| Case Weight | 48 lb. |
| Width | 22.7 Inches |
| Depth | 23.2 Inches |
| Height | 18.8 Inches |
| Voltage | 115 Volts |
| Hertz | 60 Hz |
| Phase | 1 |
| Motor | 250 W / 1/3 HP |
| Horsepower | 1/3 HP |
| Drive | Belt Drive |
| Blade Diameter | 12 Inches |
| Blade | Hardened Chromium-Plated 100Cr6 Steel |
| Cut Thickness | Up to 0.5 Inch |
| Carriage Stroke | 9.7 Inches |
| Meat Carriage Size | 8.9" x 9.5" |
| Daily Use | Meat 2 hoursCheese 30 min |
| Construction | Anodized Aluminum Alloy and Stainless Steel |
| Sharpener | Built-In Two-Stone Sharpener, Assembly SH012 |
| Safety Features | Blade GuardBlade Cover Micro SwitchInterlocking Thickness GaugeLow Voltage Release |
| Optional Accessories | Attachable scale platform P488Cleaning kit |
| Certifications | cULus Listed, UL EPH Classified NSF/ANSI 8 |
| Warranty | 1 Year from Date of Purchase |
| Warranty Terms | Parts Found Defective under Normal Use Repaired or ReplacedPurchaser Returns the Unit to the Factory, Freight Prepaid |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
