Everpure EV998058 WS-30E Single Water Conditioner, 30,000 Grains/tank @ 15 lbs Salt/cu.ft. Capacity

Everpure EV998058 WS-30E Single Water Conditioner, 30,000 Grains/tank @ 15 lbs Salt/cu.ft. Capacity

Features And Benefits

• Hardness removal of 30,000 grains at flow rates up to 10 gpm (37.8 Lpm) continuous
• Advanced, user-friendly controls incorporate time-tested, hydraulically-balanced piston, seal and spacer design to pilot service flow and regeneration
• Pentair® Fleck® 5600-SXT meter-initiated control valve monitors water usage and minimizes salt and water usage
• Five-cycle control delivers controlled upflow backwash, downflow brining and slow rinse, rapid rinse, timed brine refill and downflow service
• Fiberglass-reinforced resin vessels with NSF-approved polyethylene liners guard against corrosion and optimize performance
• Single tank design for simplicity, efficiency, and space savings
• Large capacity brine tank maximizes time between salt replenishments

Installation Tips

• Locate equipment on a smooth, level surface.
• Maintain an air-gap at the end of the drain line.
• Secure drain line directly over floor drain or stand pipe.
• When connecting to a water heater, install a check valve on the soft water piping to prevent hot water back-up.
• When sweating/installing copper piping, protect the control valve from excessive heat.
• Check local codes for additional equipment that may be required, such as backflow prevention devices (i.e. RPZ).