Hatco B950-144 Flav-R-Shield Adjustable Self-Service Sneeze Guard, 144" Wide, 4 Bays, Tempered Glass
Description
A 144-inch, 4 bays glass sneeze guard for a self-service buffet line, with a face panel you can tilt and raise to suit the food and the counter.
The Hatco Flav-R-Shield B950-144 is a stationary self-service sneeze guard for buffet lines and serving stations. It spans 144" from center post to center post in 4 bays, with 3/8" tempered glass on 1" brushed SAE 304 stainless steel posts. The face panel rotates in 15-degree steps and gives 9" to 19" of clearance when the glass sits at 45 degrees, and the posts adjust up to 23" high. It mounts to stainless steel, natural or engineered solid stone and laminate countertops.
Will it fit · Will it hook up
- Footprint
- 144" W center post to center post; 147-1/2" outside flange width; 18" D center of post to edge of end panel
- Height
- Posts adjust up to 23" high, based on the pivoting face and adjustable post bracket
- Food clearance
- 9" to 19" under the face panel when the glass is at a 45 degree angle
- Bays
- 4 Bays; 36" per bay, center post to center post
- Counter
- Mounts to stainless steel, natural and engineered solid stone, and laminate countertops
- Fasteners
- Each 1.9" flange cup takes a single 3/8" lag bolt in the center or three #10 or #12 drywall screws; not included
Plan the flange cup positions before drilling: the outside flange width is 147-1/2".
Tilting glass face
The patented face panel rotates in 15-degree increments, so you can set clearance from 9" to 19" when the glass is at 45 degrees.
Height-adjustable posts
Mounting post height adjusts up to 23" through the pivoting face and an adjustable post bracket, so the guard can be matched to the counter and the guests.
Thick tempered glass
3/8" tempered glass with 3/4" radius corners and flat polished edges. The end panels are 1/4" thick, 18" deep and 19" high.
Stainless steel posts
1" brushed SAE 304 stainless steel posts sit in 1-1/2" base tubes and 1.9" stainless finish flange cups.
Made to order options
Hatco offers custom face widths from 8" to 75", right, left or no end panel, a light bar, light brackets and black powder coated posts.
Delivery and setup
- Inspect every box for damage before you sign, and note any damage on the delivery receipt. Hatco notes the unit may arrive in more than one box.
- Hatco says not to assemble or install a sneeze guard alone: plan on two or more people, and wear eye protection when you handle the glass.
- Mounting fasteners are not included. Hatco calls for a single 3/8" lag bolt in the center of each flange cup, or three #10 or #12 drywall screws, chosen for your counter material.
- Measure carefully before you drill: on a multi-bay unit the flange cups must stay square to each other and to the counter.
- In the box per the Hatco installation guide: face panel, end panels, adjustable post assemblies with brackets, a center post assembly on multi-bay units, and a hardware packet with hex wrenches for the set screws.
Questions buyers ask
Will it fit my serving counter?
The B950-144 is 144" wide center post to center post and 147-1/2" wide outside the flanges. It is 18" deep from the center of the post to the edge of the end panel, and the posts adjust up to 23" high.
How much room is there under the glass?
With the face panel at a 45 degree angle, clearance is adjustable from 9" to 19". The face rotates in 15-degree steps.
What countertops can it mount to?
Hatco lists stainless steel, natural and engineered solid stone, and laminate countertops. Each flange cup takes one 3/8" lag bolt or three #10 or #12 drywall screws, which are not included.
Is it NSF listed?
The Hatco spec sheet shows the NSF Component mark and the safety glazing certification council mark. Hatco notes the standard 18" deep end panels meet NSF standards.
How should I clean it?
Hatco says to spray cleaner onto a non-abrasive cloth, never straight onto the guard, and wipe it down. Abrasive cleaners or cloths can scratch it and void the warranty.
Can I order a custom size or finish?
Hatco offers face panel widths from 8" to 75" in 1/4" steps, right only, left only or no end panel, a light bar on panels 18" or wider, 1 to 4 light brackets and black powder coated posts. Ask us for a quote on a custom build.
What warranty does it have?
Hatco lists a one year parts only warranty for this sneeze guard.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | B950-144 |
| Series | Flav-R-Shield B950 |
| Service Type | Self-Service, Stationary |
| Number of Bays | 4 |
| Shipping Weight | 184 lb. |
| Shipping Note | May ship in multiple boxes |
| Width | 144 Inches |
| Width Measured | Center of post to center of post |
| Outside Flange Width | 147-1/2" |
| Depth | 18 Inches |
| Depth Measured | Center of post to edge of end panel |
| Height | Up to 23 Inches |
| Height Note | Based on pivoting face and adjustable post bracket |
| Food Clearance | 9" to 19" with the glass at a 45 degree angle |
| Width per Bay | 36" center post to center post |
| Glass | 3/8" tempered glass, 3/4" radius corners, flat polished edges |
| End Panels | 1/4" thick x 18" deep x 19" high glass |
| Posts | 1" brushed SAE 304 stainless steel posts with 1-1/2" base tubes |
| Flange Cup Base | 1.9" diameter, stainless steel finish |
| Face Panel Adjustment | Rotates in 15 degree increments |
| Mounting Surfaces | Stainless steel, natural and engineered solid stone, laminate countertops |
| Fasteners | Single 3/8" lag bolt or three #10 or #12 drywall screws per flange cup, not included |
| Custom Options | Face width 8" to 75"Right, left or no end panelLight bar, panel 18" wide or wider1 to 4 light bracketsBlack powder coated posts |
| Certifications | NSF Component, SGCC |
| Country of Origin | Made in the USA |
| Warranty | 1 Year Parts Only |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What Our Customers Say

