Hatco C-15-480-3-QS Compact Electric Booster Water Heater, 15 kW, 6 Gal., 480V 3-Phase, Quick-Ship Stock Model
A space-saving electric booster that heats dishwasher final rinse water to 180°F for sanitizing and flash-drying.
The Hatco C-15-480-3-QS is a 15 kW Compact Electric Booster Water Heater. It supplies the 180°F final rinse water a high-temperature dishwasher needs, recovering 151 gallons per hour at a 40°F rise or 86 gph at a 70°F rise. The 6-gallon Castone-lined tank stands next to the dishwasher on 6" legs or slides under a dishtable on accessory brackets. This is the Hatco Quick-Ship stock version with legs, built for 480V three phase.
Install the booster as close to the dish machine as you can. Water over 3.0 grains of hardness per gallon must be treated and softened.
15 kW heats 151 gph at a 40°F rise or 86 gph at a 70°F rise, for the 180°F final rinse.
The 6-gallon tank has a Castone lining, a 150 psi working pressure and a 300 psi hydrostatic test, with fiberglass insulation to cut heat loss.
Temperature/pressure relief valve, pressure reducing valve with bypass and two temperature/pressure gauges come factory installed.
A high-temperature limit (ECO) and a low-water cut-off guard against overheating and element burnout.
Front panels swing away to reach the low-water cut-off, control fuses, transformer, probes and elements.
Stands on the standard 6" legs, or hangs under a dishtable on accessory slide brackets (QSBOOSTERBRKT).
Match the recovery to your machine. The C-15-480-3-QS heats 151 gallons per hour at a 40°F rise or 86 gph at a 70°F rise. Send us the dishwasher model and we will check the size.
This listing is the 480V three phase Quick-Ship version. It draws 18.1 A and Hatco lists a 30 A breaker.
The QS models are Hatco Quick-Ship stock units with legs. This one is the C-15 built for 480V three phase.
Yes. Order the slide brackets (QSBOOSTERBRKT); rails are welded to the underside of the table and the booster slides on. Make sure the table can carry the booster full of water.
Castone tank, low-water cut-off, temperature/pressure relief valve, pressure reducing valve, two temperature/pressure gauges, 6" legs, indicator light and on/off switch.
Treat water over 3.0 grains of hardness per gallon. Hatco recommends its Blended Phosphate Water Treatment System (QSWATERTREAT) for electric boosters; lime and sediment failures are not covered.
The Castone tank has a 10-year limited warranty: 1 year parts and labor plus 9 years parts-only on the tank.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | C-15-480-3-QS |
| Series | Compact Electric Booster Water Heater |
| Type | Electric Booster Water Heater for Dishwasher Final Rinse |
| Version | Hatco Quick-Ship Stock Model with Legs480V 3-Phase |
| Shipping Weight | 120 lb. |
| Width | 13.06 Inches |
| Depth | 20.69 Inches |
| Height | 13.78 Inches |
| Depth with Relief Valve | 26" |
| Height on Legs | 19-3/4" on Standard 6" Legs |
| Capacity | 6 Gallons |
| Recovery at 40°F Rise | 151 Gallons per Hour |
| Recovery at 70°F Rise | 86 Gallons per Hour |
| Power | 15 kW |
| Voltage | 480 Volts |
| Phase | 3 |
| Amps | 18.1 A at 480V 3-Ph |
| Breaker or Fuse Size | 480V 3-Ph: 30 A |
| Connection | HardwiredElectrical Knockouts on Left Side and Bottom |
| Rinse Temperature | 180°F Final Rinse |
| Inlet and Outlet | 3/4" NPT |
| Incoming Water | 85°F Minimum160°F Maximum |
| Flow Pressure | Pressure Reducing Valve Set to 20 psi |
| Tank Pressure | 150 psi Working300 psi Hydrostatic Test |
| Water Quality | Treat and Soften Water over 3.0 Grains per GallonNo Deionized Water |
| Tank | Castone-LinedFiberglass Insulation |
| Exterior | Stainless Steel Front PanelSilver-Gray Hammertone Powder-Coated BodyBlack Base |
| Legs | 6" Black Plastic Legs, Standard |
| Control Type | Calibrated Immersion ThermostatOn/Off SwitchIndicator Light |
| Safety | High-Temperature Limit ECOLow-Water Cut-OffTemperature/Pressure Relief Valve |
| Trim | Temperature/Pressure Relief ValvePressure Reducing Valve with BypassTwo Temperature/Pressure Gauges |
| Clearance | Sides at Least 2"Front Access to ControlsRoom to Service Relief ValveIndoors, Room Air at Least 70°F |
| Factory Options | Stainless Steel Body and BaseSecurity Package, Torx Screws and Control Cover |
| Accessories | Slide BracketsStainless Steel Floor Mounting Leg AssemblyBlended Phosphate Injection SystemShock AbsorberBack Pressure Relief ValveBrass Pressure Reducing Valve with BypassStainless Steel Adjustable Legs 6" to 7" |
| Certifications | cULus, NSF |
| Country of Origin | Made in USA |
| Warranty | 10-Year Limited Tank Warranty1 Year Parts and Labor plus 9 Years Parts-Only on the Tank |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
