Hatco CSSBR-4818 Remote Built-In Simulated Stone Cold Shelf with Condensing Unit, 48" x 18" Usable, 120V

Hatco CSSBR-4818 Remote Built-In Simulated Stone Cold Shelf with Condensing Unit, 48" x 18" Usable, 120V

HatcoSKU: HAT-CSSBR-4818

Price:
Regular price$5,294.85
  • Warranty · 1-yr Standard

Secure checkout

Apple Pay Diners ClubDiscoverGoogle Pay Mastercard Shop Pay Visa

Talk to an equipment specialist

Mon–Sat 8 AM–5 PM ET

Questions about size, power, delivery or a quote for several units?

Call

Will it fit · Will it plug in

Outside (W × D × H)51" × 21" × 7.54"
Power120V · 450 W · 5.9 A
Shipping weight164 lb.
ListedcULus, NSF Component

Measure every doorway on the delivery path before you order.

Highlights

  • 48" x 18" usable chilled surface; overall 51" x 21"
  • Swanstone simulated stone top, bottom mount, flush to the countertop; Ash Gray standard
  • Cutout 48.375" W x 18.375" D with 3/8" radii; shelf height 7.54"
  • Loose 1/3 HP R-513A condensing unit, control box and TXV; lines up to 50 ft.
  • 120V, 60 Hz, single phase, 450 W, 5.9 A, hardwired at the control box
  • Electronic temperature control box on a 4 ft. lead wire; patented thermal break
  • cULus and NSF component listed, made in the USA; ecoization

Specifications

ManufacturerHatco
Model NumberCSSBR-4818
SeriesCSSBR Remote Cold Built-In Simulated Stone Shelves
TypeRemote Cold Shelf, Built-In Simulated Stone, Unattached Condensing Unit and Control Box
Shipping Weight164 lb.
Width51"
Depth21"
Height7.54"
Usable Shelf Space48" W x 18" D
Cutout Width48.375", 3/8" Corner Radii
Cutout Depth18.375", 3/8" Corner Radii
Control Box Cutout7.438" W x 5.625" H
RefrigerantR-513A, Condensing Unit Shipped Without Refrigerant
Compressor1/3 HP, Remote, Shipped Loose
Condensing UnitSight Glass, Service Valves, Dryer/Filter and Receiver
Line LengthUp to 50 ft. Condensing Unit to Shelf
Connections3/8" O.D. Suction, 3/8" O.D. Liquid
Voltage120V
Hertz60 Hz
PhaseSingle Phase
Amps5.9 A
Wattage450 Watts
ConnectionField Wired to Control Box Terminal Block by an Electrician
Control TypeElectronic Temperature Control Box with On/Off Switch, Auto-Defrost Set On Site
Control Lead4 ft. Lead Wire Standard
SurfaceSwanstone Simulated Stone, Ash Gray Standard
Thermal BreakPatented, Reduces Condensation on Adjacent Surfaces
IncludedShelf with Temperature Probe, Control Box, Condensing Unit, TXV Valve, All Shipped Loose
Factory OptionsSwanstone Birch or Ice, Additional 4-Year Compressor Parts Warranty
CertificationscULus, NSF Component
Made InUSA
EcoizationYes
Warranty1 Year Standard
Compressor Warranty OptionAdditional 4 Years Parts Only, Ordered with the Unit

Resources & Documents

Specs

Manufacturer Hatco
Model Number CSSBR-4818
Series CSSBR Remote Cold Built-In Simulated Stone Shelves
Type Remote Cold Shelf, Built-In Simulated Stone, Unattached Condensing Unit and Control Box
Shipping Weight 164 lb.
Width 51 Inches
Depth 21 Inches
Height 7.54 Inches
Usable Shelf Space 48" W x 18" D
Cutout Width 48.375 Inches, 3/8" Corner Radii
Cutout Depth 18.375 Inches, 3/8" Corner Radii
Control Box Cutout 7.438" W x 5.625" H
Refrigerant R-513ACondensing Unit Shipped Without Refrigerant
Compressor 1/3 HP, Remote, Shipped Loose
Condensing Unit Sight Glass, Service Valves, Dryer/Filter and Receiver
Line Length Up to 50 ft. Condensing Unit to Shelf
Connections 3/8" O.D. Suction3/8" O.D. Liquid
Voltage 120 Volts
Hertz 60 Hz
Phase Single Phase
Amps 5.9 Amps
Wattage 450 Watts
Connection Field Wired to Control Box Terminal Block by an Electrician
Control Type Electronic Temperature Control Box with On/Off SwitchAuto-Defrost Set On Site
Control Lead 4 ft. Lead Wire Standard
Surface Swanstone Simulated Stone, Ash Gray Standard
Thermal Break Patented, Reduces Condensation on Adjacent Surfaces
Included Shelf with Temperature ProbeControl BoxCondensing UnitTXV ValveAll Shipped Loose
Factory Options Swanstone Birch or IceAdditional 4-Year Compressor Parts Warranty
Certifications cULus, NSF Component
Made In USA
Ecoization Yes
Warranty 1 Year Standard
Compressor Warranty Option Additional 4 Years Parts Only, Ordered with the Unit

Certifications

cULus
NSF Component
Call

Description

A built-in simulated stone cold shelf with a separate condensing unit, so fabricators can place the refrigeration where the counter design needs it.

Hatco CSSBR-4818 remote simulated stone cold shelf with loose control box and condensing unit, Hatco series image

The Hatco CSSBR-4818 is a remote cold shelf with a 48" x 18" Swanstone simulated stone cooled surface that mounts from below, flush to the countertop. The 1/3 HP condensing unit, control box and TXV valve ship loose for field installation, with up to 50 ft. of refrigerant line between condensing unit and shelf. The condensing unit uses R-513A and has a sight glass, service valves, dryer/filter and receiver for service.

Will it fit · Will it hook up

Outside size
51" W x 21" D x 7.54" H shelf only; condensing unit and control box mount separately
Counter cutout
48.375" wide x 18.375" deep with 3/8" corner radii
Power
120V, 60 Hz, single phase, 450 W, 5.9 A; an electrician wires the supply to the control box terminal block
Refrigeration
Field-installed lines up to 50 ft. between condensing unit and shelf; 3/8" O.D. suction and liquid connections
Control box
Mounts on a vertical wall; panel cutout 7.438" W x 5.625" H

Measure the counter opening before ordering: the cutout sizes above are what the shelf drops into.

Remote condensing unit

The 1/3 HP R-513A condensing unit ships loose, with a sight glass, service valves, dryer/filter and receiver. Hatco ships the condenser without refrigerant charge.

Thermal break

A patented thermal break cuts condensation and cold transfer onto the countertop around the shelf.

Swanstone surface

Foodsafe Swanstone simulated stone in Ash Gray, with Birch or Ice at no charge when ordered. It matches the Hatco GRSSB heated stone shelves.

Digital control box

An electronic temperature control box with on/off switch comes on a 4 ft. lead wire, so it can mount on the cabinet front away from the shelf. Auto-defrost can be set on site.

Delivery and setup

  • Inspect the crate for damage before you sign, and note any damage on the delivery receipt.
  • Approximate shipping weight is 164 lb. The shelf arrives in a shipping frame; keep it in the frame until the counter and cabinet are ready.
  • The shelf, control box, condensing unit and TXV valve arrive as separate pieces. A refrigeration technician brazes the lines and a qualified electrician makes the power connection at the control box.
  • Install indoors, at cabinet air between 65°F and 86°F, with louvered openings in front of and behind the condensing unit.
  • Seal the shelf to the countertop with NSF-approved silicone sealant rated for -10°F to 250°F.

Questions buyers ask

What size counter cutout does it need?

Cut 48.375" wide x 18.375" deep with 3/8" corner radii. The overall shelf with brackets is 51" x 21".

How is it powered?

120V, 60 Hz, single phase, 450 W and 5.9 A. Hatco lists no cord and plug, so an electrician wires the supply into the control box, which then powers the condensing unit.

How far away can the condensing unit go?

Up to 50 ft. of refrigerant line between the condensing unit and the shelf. Leave at least 2" between the condensing unit and any combustible surface.

What refrigerant does it use?

The CSSBR condensing unit uses R-513A. Hatco ships it without refrigerant, so the installing technician charges the system on site.

What options are there?

At order time only: Birch or Ice Swanstone instead of standard Ash Gray at no charge, and an additional 4-year parts-only compressor warranty. Non-standard colors are non-returnable.

What warranty does it have?

Hatco's remote cold shelf manual states a standard one year parts and on-site labor warranty, with 24/7 parts and service help in the US and Canada. An extra 4-year parts-only compressor warranty can be bought with the unit.

48" x 18" SurfaceUsable chilled shelf space.
1/3 HP Remote UnitR-513A, ships loose with control box.
120V 5.9 AWired to the control box.
cULus, NSF ComponentListings shown on the Hatco sheet.

Specs

Manufacturer Hatco
Model Number CSSBR-4818
Series CSSBR Remote Cold Built-In Simulated Stone Shelves
Type Remote Cold Shelf, Built-In Simulated Stone, Unattached Condensing Unit and Control Box
Shipping Weight 164 lb.
Width 51 Inches
Depth 21 Inches
Height 7.54 Inches
Usable Shelf Space 48" W x 18" D
Cutout Width 48.375 Inches, 3/8" Corner Radii
Cutout Depth 18.375 Inches, 3/8" Corner Radii
Control Box Cutout 7.438" W x 5.625" H
Refrigerant R-513ACondensing Unit Shipped Without Refrigerant
Compressor 1/3 HP, Remote, Shipped Loose
Condensing Unit Sight Glass, Service Valves, Dryer/Filter and Receiver
Line Length Up to 50 ft. Condensing Unit to Shelf
Connections 3/8" O.D. Suction3/8" O.D. Liquid
Voltage 120 Volts
Hertz 60 Hz
Phase Single Phase
Amps 5.9 Amps
Wattage 450 Watts
Connection Field Wired to Control Box Terminal Block by an Electrician
Control Type Electronic Temperature Control Box with On/Off SwitchAuto-Defrost Set On Site
Control Lead 4 ft. Lead Wire Standard
Surface Swanstone Simulated Stone, Ash Gray Standard
Thermal Break Patented, Reduces Condensation on Adjacent Surfaces
Included Shelf with Temperature ProbeControl BoxCondensing UnitTXV ValveAll Shipped Loose
Factory Options Swanstone Birch or IceAdditional 4-Year Compressor Parts Warranty
Certifications cULus, NSF Component
Made In USA
Ecoization Yes
Warranty 1 Year Standard
Compressor Warranty Option Additional 4 Years Parts Only, Ordered with the Unit

Certifications

cULus
NSF Component

Payment & Security

Apple Pay Diners Club Discover Google Pay Mastercard Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

What Our Customers Say

Related Products

Recently viewed