Hatco CSUP-48-S R-290 Cold Undermount Shelf, 48" x 24" Cooled Area, Anodized Aluminum, 120V
Description
Turns a 48" x 24" section of a granite or quartz countertop into a cold serving surface with no cutout in the stone.
The Hatco CSUP-48-S is an R-290 cold shelf that mounts directly against the underside of the countertop. Its anodized aluminum shelf chills through the stone, so pre-chilled food on the counter stays cold while the counter keeps a seamless look. The R-290 condensing unit is attached under the shelf, and a remote-mountable electronic temperature control box with an on/off switch sits on a 4 ft lead wire. It runs on 120V and plugs into a standard outlet with its 6 ft cord and NEMA 5-15P plug.
Will it fit · Will it hook up
- Outside size
- 51-5/16" W x 27-5/16" D x 23-1/8" H below the counter, including brackets and condensing unit; height adjustable up to 38"
- Cooled area
- 48" x 24" usable shelf space under the countertop
- Countertop
- Granite or quartz up to 1-3/16" thick, Swanstone, or stainless steel or aluminum surfaces Hatco approves; other materials need factory approval
- Substrate cutout
- 48-3/8" W x 24-3/8" D with 3/8" corner radii, only when mounting through plywood or other material under the counter
- Power
- 120V, 60 Hz, single phase, 560 W, 9.3 A; 6 ft cord with NEMA 5-15P plug
- Ventilation
- Closed cabinets need intake ducting and an exhaust opening; keep cabinet air at 65°F to 86°F, away from fryers, grills and drafts
Plan the cabinet below: the condensing unit hangs under the counter and needs fresh intake air.
Cold through the stone
The aluminum shelf presses against the underside of the countertop and chills a 48" x 24" area through it, with no cutout in the top.
R-290 refrigerant
The attached condensing unit uses natural R-290 refrigerant with a 1/2 hp compressor and 4,318 BTU/hr heat rejection.
Digital temperature control
An electronic temperature control box with power on/off switch and auto-defrost setting comes on a 4 ft lead wire.
Condenser position
Left-aligned under the shelf as standard; center-aligned at no charge, ordered at purchase.
Ready to bond
Thermal mastic caulk and a single-use applicator come with the shelf to bond it to the countertop.
Delivery and setup
- Inspect the crate for damage before you sign, and note any damage on the delivery receipt. Approximate shipping weight is 176 lb.
- The installation kit (intake bracket, duct clamp, flexible duct and duct collar) ships separately from the shelf.
- In cold weather, let the unit sit at 65°F to 86°F for at least 10 hours before you turn it on.
- Add bracing or structural support under the countertop if needed so it carries the weight of the unit and its contents.
- This unit uses flammable R-290 refrigerant: service must be done by qualified refrigeration personnel.
Questions buyers ask
Do I need to cut a hole in my countertop?
No. The shelf mounts against the underside of the countertop and cooling transfers through it. A cutout is only needed in plywood or other material under the top, if there is any.
Which countertops does it work with?
Hatco approves granite and quartz up to 1-3/16" thick, Swanstone, and certain stainless steel or aluminum surfaces. Contact Hatco for any other material.
What power does it need?
A 120V, 60 Hz outlet. Hatco rates it at 560 W and 9.3 A, with a 6 ft cord and NEMA 5-15P plug.
Can food sit right on the counter above it?
Make sure food and pans are pre-chilled to a food-safe temperature first. The shelf keeps pre-chilled food cold; it is not designed to chill warm food down.
Where does the condensing unit go?
Left-aligned under the shelf as standard; center-aligned at no charge, ordered at purchase. It hangs under the shelf inside the cabinet and needs a steady supply of fresh air; closed cabinets need intake ducting.
What warranty does it have?
Hatco covers it under its limited warranty, 18 months for components not listed separately. An additional four-year parts-only warranty on the compressor can be added at purchase.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | CSUP-48-S |
| Series | CSUP R-290 Cold Shelves Undermount |
| Shipping Weight | 176 lb. |
| Width | 51-5/16 Inches |
| Depth | 27-5/16 Inches |
| Height | 23-1/8 Inches |
| Height Adjustment | Up to 38" |
| Usable Shelf Space | 48" x 24" W x D |
| Substrate Cutout | 48-3/8" W x 24-3/8" D with 3/8" RadiiOnly for Added Construction Below Countertop |
| Voltage | 120 Volts |
| Hertz | 60 Hz |
| Phase | 1 |
| Wattage | 560 Watts |
| Amps | 9.3 Amps |
| Plug Type | NEMA 5-15P |
| Cord | 6 ft. |
| Refrigerant | R-290Factory Fill 4.2 oz. |
| Compressor | 1/2 HP |
| Heat Rejection | 4,318 BTU/hr |
| Condensing Unit | Attached Below ShelfLeft-aligned under the shelf as standard; center-aligned at no charge, ordered at purchase |
| Control Type | Electronic Temperature Control BoxOn/Off SwitchAuto-Defrost4 ft. Lead Wire |
| Surface | Anodized Aluminum Shelf, Mounted Under Countertop |
| Approved Countertops | Granite or Quartz up to 1-3/16"SwanstoneHatco-Approved Stainless Steel or Aluminum |
| Ambient Temperature | 65°F to 86°F |
| In the Box | Shelf with Condensing UnitTemperature Control BoxCord and PlugThermal Mastic Caulk and ApplicatorInstallation Kit Ships Separately |
| Extended Warranty | Additional 4-Year Parts-Only Compressor Warranty, at Purchase |
| Certifications | cULus, NSF |
| Made In | USA |
| Warranty | 18 Months Limited |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What Our Customers Say

