Hatco CWBP-5 R-290 Refrigerated Drop-In Cold Well, 5 Full-Size Pans, Top Mount, 120V

Hatco CWBP-5 R-290 Refrigerated Drop-In Cold Well, 5 Full-Size Pans, Top Mount, 120V

HatcoSKU: HAT-CWBP-5

Price:
Regular price$5,840.45
  • Warranty · 1-yr Standard

Secure checkout

Apple Pay Diners ClubDiscoverGoogle Pay Mastercard Shop Pay Visa

Talk to an equipment specialist

Mon–Sat 8 AM–5 PM ET

Questions about size, power, delivery or a quote for several units?

Call

Will it fit · Will it plug in

Outside (W × D × H)71" × 27" × 25.5"
Power120V · 560 W · 9.3 A · NEMA 5‑15P
Capacity5 Full-Size Pans
Shipping weight245 lb.
ListedcULus, NSF 7 Component

Measure every doorway on the delivery path before you order.

Highlights

  • Holds 5 full-size 12" x 20" pans, 12" deep well, top mount
  • Self-contained R-290 refrigeration, 1/2 HP compressor, auto-defrost electronic control
  • 120V, 60 Hz, single phase, 9.3 A, 560 W with 6 ft. cord and NEMA 5-15P plug
  • 71" W x 27" D x 25.5" H; cutout 69.125"-70" W x 25.19"-26" D
  • Control panel mounts beside the condensing unit or up to 4 ft. away
  • 1" brass drain; insulated sides and bottom; stainless bezel on aluminized steel housing
  • cULus and NSF 7 component listed, made in the USA

Specifications

ManufacturerHatco
Model NumberCWBP-5
SeriesCWBP R-290 Refrigerated Drop-In Wells
Shipping Weight245 lb.
Width71"
Depth27"
Height25.5"
Well Depth12"
Cutout Width69.125 to 70"
Cutout Depth25.19 to 26"
Capacity5 Full-Size Pans
Pan Size12" x 20" Full-Size
RefrigerantR-290, 5.1 oz. Factory Fill
Compressor1/2 HP, Self-Contained
Heat of Rejection3135 BTU/hr
Factory Setpoint39°F
DefrostAuto-Defrost, Programmed On Site
Voltage120V
Hertz60 Hz
PhaseSingle Phase
Amps9.3 A
Wattage560 Watts
Plug TypeNEMA 5-15P
Cord6 ft. from Control Panel; 48" Cord Control Panel to Condensing Unit
Drain1" Brass Drain
ExteriorAluminized Steel Housing, Stainless Steel Bezel
InsulationInsulated Sides and Bottom
IncludedElectronic Temperature Control, 20" Pan Support Bars, Condensing Unit, Filter-Drier
Factory OptionsSlant Kit 5°, Factory-Installed Gasket, Additional 4-Year Compressor Parts Warranty, Center-Aligned Condenser
CertificationscULus, NSF 7 Component
Made InUSA
Warranty1 Year Standard
Compressor Warranty OptionAdditional 4 Years Parts Only, Ordered with the Unit

Resources & Documents

Specs

Manufacturer Hatco
Model Number CWBP-5
Series CWBP R-290 Refrigerated Drop-In Wells
Shipping Weight 245 lb.
Width 71 Inches
Depth 27 Inches
Height 25.5 Inches
Well Depth 12 Inches
Cutout Width 69.125 to 70 Inches
Cutout Depth 25.19 to 26 Inches
Capacity 5 Full-Size Pans
Pan Size 12" x 20" Full-Size
Refrigerant R-290, 5.1 oz. Factory Fill
Compressor 1/2 HP, Self-Contained
Heat of Rejection 3135 BTU/hr
Factory Setpoint 39°F
Defrost Auto-Defrost, Programmed On Site
Voltage 120 Volts
Hertz 60 Hz
Phase Single Phase
Amps 9.3 Amps
Wattage 560 Watts
Plug Type NEMA 5-15P
Cord 6 ft. from Control Panel; 48" Cord Control Panel to Condensing Unit
Drain 1" Brass Drain
Exterior Aluminized Steel Housing, Stainless Steel Bezel
Insulation Insulated Sides and Bottom
Included Electronic Temperature Control, 20" Pan Support Bars, Condensing Unit, Filter-Drier
Factory Options Slant Kit 5°Factory-Installed GasketAdditional 4-Year Compressor Parts WarrantyCenter-Aligned Condenser
Certifications cULus, NSF 7 Component
Made In USA
Warranty 1 Year Standard
Compressor Warranty Option Additional 4 Years Parts Only, Ordered with the Unit

Certifications

cULus
NSF 7 Component
Call

Description

A top-mount refrigerated well that keeps 5 full-size pans of pre-chilled food at safe serving temperature on a standard 120V outlet.

Hatco CWBP-5 R-290 refrigerated drop-in cold well, Hatco product image of a 6-pan CWBP well with condensing unit and control panel

The Hatco CWBP-5 is a self-contained R-290 refrigerated drop-in well for 5 full-size 12" x 20" pans. Angled inside walls and copper evaporator coils around the well let cold air blanket the food from top to bottom. The condensing unit hangs under the well, and the control panel mounts on either side of it or up to 4 ft. away.

Will it fit · Will it hook up

Outside size
71" W x 27" D x 25.5" H overall; well is 12" deep
Counter cutout
69.125" to 70" wide x 25.19" to 26" deep
Power
120V, 60 Hz, single phase, 560 W, 9.3 A; 6 ft. cord with NEMA 5-15P plug from the control panel
Outlet
Grounded receptacle within 6 ft. of the control panel and at least 12" above the cabinet floor
Drain
1" brass drain to a trap and drain line, or a catch pan under the fitting
Ventilation
At least 7" around the condensing unit; closed cabinets need 12" x 12" louvered openings and intake ducting
Room
Indoors, cabinet air 65°F to 86°F, away from fryers, grills, exhaust hoods and doors

Measure the counter: the cutout sizes above are what the well drops into, and the counter must be level for draining.

R-290 refrigeration

A 1/2 HP compressor uses R-290 propane refrigerant, 5.1 oz. factory fill. Hatco states R-290 absorbs heat 90% better than other refrigerants for faster recovery.

Angled cold wall

The top-angled inside wall gives more coil surface and lets cold air blanket the pans. NSF 7 component cold wall construction keeps food cold without drying it out.

Digital control

An electronic controller with a power switch is factory set to 39°F. Auto-defrost can be programmed on site, from off to a set number of hours between cycles.

Flexible mounting

The control panel mounts on either side of the condensing unit or up to 4 ft. away. Condensing unit sits under the left side as standard; center-aligned is a no-charge factory option.

Insulated, easy to clean

Sides and bottom are insulated with environmentally friendly insulation. A 1" brass drain lets you rinse the well at closing.

Delivery and setup

  • Inspect the crate for damage before you sign, and note any damage on the delivery receipt.
  • Approximate shipping weight is 245 lb. The well arrives in a shipping frame; keep it upright and in the frame until the counter cutout is ready.
  • Hatco ships the installation kit (intake bracket, duct clamp, flexible duct, 90° elbow and duct collar) separately.
  • If it arrives in cold weather, let it sit at room temperature for 10 hours before switching it on.
  • Installation must be done by qualified installers to local electrical and plumbing codes. The condensing unit must be isolated from other electrical devices, and R-290 service needs a technician trained on flammable refrigerant.
  • Seal the bezel to the counter with NSF-approved silicone, or order the factory-installed gasket. Run it empty with pans for about 60 minutes before loading pre-chilled food.

Questions buyers ask

What size counter cutout does it need?

Cut 69.125" to 70" wide and 25.19" to 26" deep. The counter must be level so the well drains, and strong enough for the unit and its contents.

What outlet does it need?

A grounded 120V, 60 Hz outlet for the NEMA 5-15P plug. It draws 9.3 amps and 560 watts. Hatco asks for the receptacle within 6 ft. of the control panel and at least 12" above the cabinet floor.

Can I install it in a closed cabinet?

Yes, with ventilation. Hatco calls for 12" x 12" louvered or grill openings in front of and behind the condensing coils, plus intake ducting; installing without it voids the warranty. Cabinet air should stay between 65°F and 86°F.

Can it cool food down?

No. It holds food that is already chilled to a safe temperature. Hatco sets it to 39°F at the factory and you can adjust the setpoint.

Are pans included?

No. It ships with 20" pan support bars for full-size pans. Pans, 12" support bars, false bottoms and trivets are accessories.

What options are there?

At order time only: a 5° slant kit, a factory-installed gasket, a center-aligned condenser, and an additional 4-year parts-only warranty on the compressor.

What warranty does it have?

Hatco's manual refers to a standard one year warranty, with 24/7 parts and service help in the US and Canada. An additional 4-year parts-only compressor warranty can be bought with the unit.

5 Full-Size Pans12" x 20" pans, 12" deep well.
R-290 Refrigerant1/2 HP self-contained compressor.
120V NEMA 5-15P9.3 A, 6 ft. cord and plug.
cULus, NSF 7NSF component listed cold wall.

Specs

Manufacturer Hatco
Model Number CWBP-5
Series CWBP R-290 Refrigerated Drop-In Wells
Shipping Weight 245 lb.
Width 71 Inches
Depth 27 Inches
Height 25.5 Inches
Well Depth 12 Inches
Cutout Width 69.125 to 70 Inches
Cutout Depth 25.19 to 26 Inches
Capacity 5 Full-Size Pans
Pan Size 12" x 20" Full-Size
Refrigerant R-290, 5.1 oz. Factory Fill
Compressor 1/2 HP, Self-Contained
Heat of Rejection 3135 BTU/hr
Factory Setpoint 39°F
Defrost Auto-Defrost, Programmed On Site
Voltage 120 Volts
Hertz 60 Hz
Phase Single Phase
Amps 9.3 Amps
Wattage 560 Watts
Plug Type NEMA 5-15P
Cord 6 ft. from Control Panel; 48" Cord Control Panel to Condensing Unit
Drain 1" Brass Drain
Exterior Aluminized Steel Housing, Stainless Steel Bezel
Insulation Insulated Sides and Bottom
Included Electronic Temperature Control, 20" Pan Support Bars, Condensing Unit, Filter-Drier
Factory Options Slant Kit 5°Factory-Installed GasketAdditional 4-Year Compressor Parts WarrantyCenter-Aligned Condenser
Certifications cULus, NSF 7 Component
Made In USA
Warranty 1 Year Standard
Compressor Warranty Option Additional 4 Years Parts Only, Ordered with the Unit

Certifications

cULus
NSF 7 Component

Payment & Security

Apple Pay Diners Club Discover Google Pay Mastercard Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

What Our Customers Say

Related Products

Recently viewed