Hatco ED20-07212 Flav-R-Shield Full-Service Pass-Over Sneeze Guard, 72" W x 12" D, 2 Bays, Glass Top Shelf
Description
A 72-inch glass pass-over sneeze guard for a staffed serving line, with a glass top shelf for passing plates across the food.
The Hatco Flav-R-Shield ED20-07212 is a stationary full-service pass-over sneeze guard for buffet lines and serving stations. It measures 72" wide and 12" deep from center post to center post, in 2 bays, on 18" high posts. Glass face panels, a glass top shelf and two end panels are 3/8" tempered glass held by 1" brushed SAE 304 stainless steel posts. 2" stainless finish flanges with tight-fitting covers hide the mounting screws and make the base easy to wipe clean.
Will it fit · Will it hook up
- Footprint
- 72" W x 12" D center post to center post; 74-3/8" outside end panel width
- Height
- 18" post height
- Bays
- 2 Bays
- Counter
- Mounts to stainless steel, natural and engineered solid stone, and laminate countertops
- Fasteners
- 2" long #8 countersink screws recommended for most surfaces; fasteners not included
Measure the counter: the outside end panel width is 74-3/8".
Pass-over top shelf
A 3/8" tempered glass top shelf sits on the posts above the glass face panels, so staff can pass plates over the guard.
Thick tempered glass
Face panels, top shelf and two end panels are 3/8" tempered glass with 3/4" radius corners and flat polished edges.
Covered flanges
2" stainless steel finish flanges with tight-fitting flange covers hide the mounting screws and maximize cleanability.
Stainless steel posts
1" diameter brushed SAE 304 stainless steel posts, 18" high, mounted to the counter through the flanges.
Made to order options
Hatco offers post heights from 12" to 30", face panels 8" to 54" per bay, 1 or 2 shelves, square corners, a light bar and black posts.
Delivery and setup
- Inspect every box for damage before you sign, and note any damage on the delivery receipt. Hatco notes the unit may arrive in more than one box.
- Hatco says not to assemble or install a sneeze guard alone: plan on two or more people, and wear eye protection when you handle the glass.
- Fasteners are not included. Hatco recommends 2" long #8 countersink screws for most surfaces; the right fastener depends on the counter material and thickness.
- Measure carefully and keep the mounting flanges square to each other and to the counter before you drill.
- In the box per the Hatco installation guide: glass face panel, end panels and top shelf, 1" stainless steel post assemblies, and a hardware packet with a hex wrench for the set screws.
- For NSF compliance, Hatco says the bottom edge of the end panels can be no higher than 1-1/2" above the counter.
Questions buyers ask
Will it fit my serving counter?
The ED20-07212 is 72" wide and 12" deep center post to center post, and 74-3/8" wide outside the end panels. The posts are 18" high.
Can I set plates on the top shelf?
The top shelf is part of the pass-over design, but the Hatco installation guide says not to place anything on top of the sneeze guard because it is not designed to be weight-bearing. Check with Hatco for your use.
Does it meet NSF?
The Hatco spec sheet shows the NSF Component mark and the safety glazing certification council mark. Hatco notes 18" end panels are required to meet NSF standards and that side panels may not meet NSF standards. This model is 12" deep, so check the end panels with your health inspector before you order.
What countertops can it mount to?
Stainless steel, natural and engineered solid stone, and laminate countertops. Hatco recommends 2" long #8 countersink screws for most surfaces; fasteners are not included.
How should I clean it?
Clean it daily. Spray cleaner onto a non-abrasive cloth, never straight onto the guard, then wipe it down. Abrasive cleaners or cloths can scratch it and void the warranty.
Can I order a custom version?
Hatco offers post heights from 12" to 30", face panels from 8" to 54" per bay, right, left or no end panel, 1 or 2 shelves, above or below counter compression flanges, square corners, a light bar and black powder coated posts. Ask us for a quote.
What warranty does it have?
Hatco lists a one year parts only warranty for this sneeze guard.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | ED20-07212 |
| Series | Flav-R-Shield ED20 |
| Service Type | Full-Service Pass-Over, Stationary |
| Number of Bays | 2 |
| Shipping Weight | 218 lb. |
| Shipping Note | May ship in multiple boxes |
| Width | 72 Inches |
| Width Measured | Center of post to center of post |
| Outside End Panel Width | 74-3/8" |
| Depth | 12 Inches |
| Depth Measured | Center of post to center of post |
| Height | 18 Inches |
| Height Measured | Post height |
| Glass | 3/8" tempered glass, 3/4" radius corners, flat polished edges |
| Glass Panels | Face panels, top shelf and two end panels |
| Posts | 1" diameter brushed SAE 304 stainless steel |
| Flanges | 2" diameter stainless steel finish flanges with tight-fitting covers |
| Mounting Surfaces | Stainless steel, natural and engineered solid stone, laminate countertops |
| Fasteners | 2" long #8 countersink screws recommended, not included |
| Custom Options | Post height 12" to 30"Face panel 8" to 54" per bayRight, left or no end panel1 or 2 shelvesAbove or below counter compression flangeSquare glass cornersLight barBlack powder coated posts |
| Certifications | NSF Component, SGCC |
| NSF Note | 18" end panels are required to meet NSF standards |
| Country of Origin | Made in the USA |
| Warranty | 1 Year Parts Only |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What Our Customers Say

