Hatco EP11-13218 Flav-R-Shield Full-Service Pass-Over Glass Sneeze Guard, 132" W x 18" D, 4 Bays
A 11 ft. low-profile glass sneeze guard with a top panel that protects food on a full-service counter while staff pass plates over it.
The Hatco Flav-R-Shield EP11 is a stationary full-service pass-over sneeze guard. The EP11-13218 spans 132" from center post to center post in 4 bays of 33", with end panels 18" deep from center post to end of glass. The end panels include back support legs. At 17-1/4" high, Hatco rates it ADA compliant on counters up to 36" from the floor. Panels are 1/4" tempered glass on 1" brushed SAE 304 stainless steel posts.
Outside flange width is 134": Hatco adds 2" to the center-of-post width.
The guard is 17-1/4" high, which Hatco rates ADA compliant for counters up to 36" from the floor.
An 11-1/2" deep glass top panel sits over a 14-3/8" high face panel, so staff can pass plates over the guard.
Face, top and two end panels are 1/4" tempered glass with 3/4" radius corners and flat polished edges.
1" diameter SAE 304 brushed stainless steel posts hold the glass in integrated clips.
2" diameter stainless finish flanges have tight-fitting covers that hide the screws and wipe clean.
132" wide from center post to center post, in 4 bays of 33". The end panels are 18" deep from center post to end of glass, and the guard is 17-1/4" high. Outside flange width is 134".
This model has the 18" end panels that Hatco says NSF standards require. Hatco also notes side panels may not meet NSF standards and refers to NSF guidelines.
Hatco says the 17-1/4" height is ADA compliant for counter surfaces up to 36" from the floor.
Stainless steel, natural and engineered solid stone, and laminate. It screws down through flanges; Hatco recommends 2" #8 countersunk screws for most surfaces, not included.
Hatco builds custom EP11 versions with post heights from 12" to 24", per-bay panels from 8" to 54", right, left or no end panel, above or below counter flanges, square glass corners, a light bar, adjustable brackets and black powder coated posts. Those are separate custom orders.
Hatco lists a one year parts-only warranty for the EP11.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | EP11-13218 |
| Series | Flav-R-Shield EP11 Full-Service Pass-Over |
| Shipping Weight | 111 lb. |
| Country of Origin | Made in the USA |
| Width | 132 Inches |
| Width Measured | Center of post to center of post |
| Outside Flange Width | 134 Inches |
| Depth | 18 Inches |
| Depth Measured | Center of post to end of glass |
| Height | 17-1/4 Inches |
| Number of Bays | 4 |
| Width per Bay | 33 Inches |
| Glass | 0.25 in. tempered glass, 0.75 in. radius corners, flat polished edges |
| Face Panel | 14.375 in. high glass face panel |
| Top Panel | 11.5 in. deep glass top panel |
| End Panels | Two 14.375 in. high glass end panels with back support legs |
| Posts | 1 in. diameter SAE 304 brushed stainless steel |
| Flanges | 2 in. diameter stainless steel finish with tight-fitting covers |
| Mounting Surfaces | Stainless steel, natural and engineered solid stone, laminate |
| Fasteners | Not included; 2 in. long #8 countersunk screws recommended for most surfaces |
| Certifications | NSF Component, SGCC |
| ADA | 17.25 in. height is ADA compliant for counter surfaces up to 36 in. from the floor |
| NSF Note | 18 in. end panels are required to meet NSF standards; side panels may not meet NSF standards |
| Warranty | 1 Year Parts Only |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
