Hatco EP12-12018 Flav-R-Shield Full-Service Pass-Over Glass Sneeze Guard, 120" W x 18" D, 3 Bays
A 120-inch stationary glass sneeze guard with a top shelf for full-service buffet lines and serving stations.
The Hatco Flav-R-Shield EP12-12018 is a full-service pass-over sneeze guard. It spans 120" center post to center post in 3 bays, with 18" deep end panels and a 17.25" post height. Glass face panels, an 11.5" deep glass top shelf and two end panels are 0.25" tempered glass with radius corners. The 1" SAE 304 brushed stainless steel posts mount to the counter through 2" flanges with covers that hide the screws.
Measure the counter: the flanges need 122" of length, 1" past each end post center.
0.25" thick tempered glass with 0.75" radius corners and flat polished edges gives a clean look along the line.
An 11.5" deep glass top shelf runs the full length, above glass face panels and two end panels.
Posts are 1" diameter SAE 304 brushed stainless steel.
2" diameter stainless steel finish flanges take tight-fitting covers that hide the mounting screws and make wipe-down easier.
Hatco lists stainless steel, natural and engineered solid stone and laminate countertops as mounting surfaces.
The guard is 120" center post to center post and 122" outside the flanges. It is 18" deep center post to center post (20" outside the flanges) and 17.25" high.
Yes. This version has the 18" deep end panels that Hatco says are required to meet NSF standards, and the EP12 spec sheet carries the NSF Component mark.
The posts set into 2" flanges that screw to stainless steel, natural or engineered solid stone, or laminate counters. Fasteners are not included; Hatco recommends 2" long #8 countersink screws for most surfaces.
Hatco lists a one year parts-only warranty for this sneeze guard.
Hatco builds custom units: post height 12" to 24", face panels 8" to 42" per bay, right-only, left-only or no end panels, above or below counter compression flanges, square glass corners, a light bar on panels 18" wide or wider, black powder coated posts. This listing is the standard size; ask our team to quote a custom build.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | EP12-12018 |
| Series | Flav-R-Shield EP12 |
| Type | Full-Service Pass-Over Sneeze Guard, Stationary |
| Number of Bays | 3 |
| Shipping Weight | 104 lb. |
| Shipping Note | May ship in multiple boxes |
| Made In | USA |
| Width | 120 Inches |
| Width Measured | Center of post to center of post |
| Outside Flange Width | 122 Inches |
| Depth | 18 Inches |
| Depth Measured | Center of post to center of post |
| Outside Flange Depth | 20 Inches |
| Height | 17.25 Inches |
| Top Shelf Depth | 11.5 Inches |
| Posts | 1" Diameter SAE 304 Brushed Stainless Steel |
| Flanges | 2" Diameter Stainless Steel FinishTight-Fitting Flange Covers Hide Screws |
| Glass | 0.25" Thick Tempered Glass |
| Glass Edges | 0.75" Radius CornersFlat Polished Edges |
| Panels | Glass Face PanelsTop ShelfTwo End Panels |
| Mounting Surfaces | Stainless SteelNatural and Engineered Solid StoneLaminate |
| Fasteners | Not Included2" Long #8 Countersink Screws Recommended |
| Certifications | NSF Component, SGCC |
| Warranty | 1 Year Parts Only |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
