Hatco EP15-132 Flav-R-Shield Full-Service Pass-Over Glass Sneeze Guard, 132" W, 22" H, Angled Front, 4 Bays
A 132-inch, 22-inch-high glass sneeze guard with an angled front for full-service lines.
The Hatco Flav-R-Shield EP15-132 is a full-service pass-over sneeze guard with its front posts tilted back to an 80 degree angle. It spans 132" center post to center post in 4 bays and stands 22" high, with a glass face panel and two 18" deep glass end panels. The glass is 0.25" tempered with radius corners and polished edges. The 1" SAE 304 brushed stainless steel posts mount to the counter through 2" flanges with covers that hide the screws.
Measure the counter: the flanges need 134" of length, 1" past each end post center.
0.25" thick tempered glass with 0.75" radius corners and flat polished edges gives a clean look along the line.
The face panel leans back on posts tilted to 80 degrees, 22" high, with two 18" deep end panels and no top shelf.
Posts are 1" diameter SAE 304 brushed stainless steel. The front posts tilt back to 80 degrees.
2" diameter stainless steel finish flanges take tight-fitting covers that hide the mounting screws and make wipe-down easier.
Hatco lists stainless steel, natural and engineered solid stone and laminate countertops as mounting surfaces.
The guard is 132" center post to center post and 134" outside the flanges. It is 18" deep center post to center post (20" outside the flanges) and 22" high.
Yes. The EP15 comes with two 18" deep end panels, and Hatco states they meet NSF standards. The spec sheet carries the NSF Component mark.
The posts set into 2" flanges that screw to stainless steel, natural or engineered solid stone, or laminate counters. Fasteners are not included; Hatco recommends 2" long #8 countersink screws for most surfaces.
Hatco lists a one year parts-only warranty for this sneeze guard.
Hatco builds custom units: post height 8" to 30", face panel width 8" to 42" per bay, right-only, left-only or no end panels, above or below counter compression flanges, square glass corners, a light bar on panels 18" wide or wider, black powder coated posts and frosted glass. This listing is the standard size; ask our team to quote a custom build.
The EP15 is 22" high with front posts tilted back to 80 degrees and has a face panel and two end panels but no top shelf. The EP11 and EP12 are 17.25" high and include a glass top panel or shelf.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | EP15-132 |
| Series | Flav-R-Shield EP15 |
| Type | Full-Service Pass-Over Sneeze Guard, Stationary, Angled Front |
| Number of Bays | 4 |
| Shipping Weight | 158 lb. |
| Shipping Note | May ship in multiple boxes |
| Made In | USA |
| Width | 132 Inches |
| Width Measured | Center of post to center of post |
| Outside Flange Width | 134 Inches |
| Depth | 18 Inches |
| Depth Measured | Center of post to center of post |
| Outside Flange Depth | 20 Inches |
| Height | 22 Inches |
| End Panel Depth | 18 Inches |
| Posts | 1" Diameter SAE 304 Brushed Stainless Steel |
| Front Posts | Tilted Back to an 80 Degree Angle |
| Flanges | 2" Diameter Stainless Steel FinishTight-Fitting Flange Covers Hide Screws |
| Glass | 0.25" Thick Tempered Glass |
| Glass Edges | 0.75" Radius CornersFlat Polished Edges |
| Panels | Face PanelTwo End Panels |
| Mounting Surfaces | Stainless SteelNatural and Engineered Solid StoneLaminate |
| Fasteners | Not Included2" Long #8 Countersink Screws Recommended |
| Certifications | NSF Component, SGCC |
| Warranty | 1 Year Parts Only |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
