Hatco EP21-03618 Flav-R-Shield Full-Service Pass-Over Sneeze Guard with Top Shelf, 36" Wide, 1 Bay, 18" Deep
A 36-inch, 1-bay glass sneeze guard with a top shelf that shields a full-service counter while staff pass plates over it.
The Hatco EP21-03618 is a Flav-R-Shield EP21 full-service pass-over sneeze guard for stationary buffet lines and serving stations. It is 36" wide from end post center to end post center, 1 bay long and 17.25" high, with glass face panels, an 11.5" glass top shelf and two 18" deep glass end panels. Each end post rises at the front, tilts back at 80 degrees and bends back to carry the glass top shelf; the end-panel glass sets the depth. It mounts to stainless steel, natural or engineered solid stone, and laminate countertops.
Measure the counter run: the end flanges take 38" of length and 19" of depth.
1" diameter brushed SAE 304 stainless steel posts. Each end post rises at the front, tilts back at 80 degrees and bends back to carry the glass top shelf; the end-panel glass sets the depth.
Durable 0.25" thick tempered glass with 0.75" radius corners and flat polished edges.
An 11.5" deep glass top shelf runs the full 36" length over 1 bay, above the glass face panels.
2" diameter stainless steel finish flanges with tight-fitting flange covers that hide the mounting screws and are easy to wipe clean.
Two 18" deep glass end panels. Hatco states 18" deep end panels are required to meet NSF standards.
Mounts to stainless steel, natural and engineered solid stone, and laminate countertops.
The EP21-03618 is 36" from end post center to end post center and 38" across the outside of the flanges. Depth is 18" (post center to the edge of the end-panel glass), 19" over the flanges, and the posts are 17.25" high.
Both are 17.25" high pass-over guards with an 11.5" glass top shelf. On the EP21 the front posts bend back to carry the shelf and the depth is measured to the edge of the end-panel glass. The EP22 uses U-shaped end posts with front and back legs, and the depth is measured post to post.
Yes, as configured. Hatco states that 18" deep end panels are required to meet NSF standards, and this model has two 18" deep end panels. The spec sheet carries the NSF Component mark.
Stainless steel, natural and engineered solid stone, and laminate countertops. It screws down through 2" flanges with covers. Fasteners are not included; Hatco recommends 2" long #8 countersink screws for most surfaces.
This listing is the standard model. Hatco also builds custom units: face panel widths of 8" to 42" per bay, right-only, left-only or no end panels, above or below counter compression flanges, square glass corners, a light bar, black powder coated posts and adjustable brackets. Ask us for a quote on a custom build.
Hatco lists a one year parts only warranty.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | EP21-03618 |
| Series | Flav-R-Shield Full-Service Pass-Over Sneeze Guard, Model EP21 |
| Type | Stationary Full-Service Pass-Over Sneeze Guard with Top Shelf |
| Number of Bays | 1 |
| Shipping Weight | 38 lb. |
| Packaging | May Ship in Multiple Boxes |
| Width | 36 Inches |
| Width Measured | Center of End Post to Center of End Post |
| Outside Flange Width | 38 Inches |
| Depth | 18 Inches |
| Depth Measured | Center of Post to Edge of Glass |
| Outside Flange Depth | 19 Inches |
| Height | 17.25 Inches |
| Top Shelf Depth | 11.5" Glass |
| Face Glass Length | 14.375" |
| Glass | 0.25" Thick Tempered Glass0.75" Radius CornersFlat Polished Edges |
| Panels | Glass Face Panels11.5" Glass Top ShelfTwo 18" Deep Glass End Panels |
| Posts | 1" Diameter Brushed SAE 304 Stainless SteelFront Posts Tilted Back to 80 Degrees |
| Post Style | Front posts bend back to carry the top shelf |
| Flanges | 2" Diameter Stainless Steel Finish with Flange CoversCover 2.1" Diameter x 1.0" HighFlange 0.875" High |
| Mounting Surfaces | Stainless SteelNatural and Engineered Solid StoneLaminate Countertops |
| Fasteners | Not Included2" Long #8 Countersink Screws Recommended for Most Surfaces |
| Certifications | NSF Component, SGCC Safety Glazing |
| NSF Note | 18" Deep End Panels Required to Meet NSF Standards |
| Country of Manufacture | Made in the USA |
| Returns | Custom by Nature, Non-Returnable per Hatco |
| Warranty | 1 Year Parts Only |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
