Hatco EP22-13215 Flav-R-Shield Full-Service Pass-Over Glass Sneeze Guard with Top Shelf, 132" W, 15" Deep End Panels, 17-1/4" H, 4 Bays
A 132-inch fixed glass sneeze guard with an 11.5-inch glass top shelf that protects food on a full-service buffet line or serving station.
The Hatco Flav-R-Shield EP22-13215 is a stationary full-service pass-over sneeze guard for buffet lines and serving stations. It spans 132 inches from post center to post center in 4 bays and stands 17-1/4 inches high. It has glass face panels, an 11.5-inch glass top shelf and two 15-inch deep glass end panels. The front posts tilt back to an 80-degree angle. The 1/4-inch tempered glass sits on 1-inch brushed 304 stainless steel posts that screw down to stainless, stone or laminate counters through covered 2-inch flanges.
Mark the post positions before you drill: the guard needs 134" of counter length at the outside flanges.
Panels are 0.25-inch thick tempered glass with 0.75-inch radius corners and flat polished edges for a clean look.
An 11.5-inch glass top shelf runs across the top of the face panels.
1-inch diameter SAE 304 brushed stainless steel posts carry the glass. Front posts tilt back to an 80-degree angle.
2-inch diameter stainless steel finish flanges have tight-fitting covers that hide the mounting screws and make the base easier to wipe clean.
Mounts to stainless steel, natural and engineered solid stone surfaces and laminate countertops.
The EP22-13215 is 132 inches from post center to post center, 134 inches at the outside of the flanges and 130 inches between the inside of the flanges. It is 15 inches deep and 17-1/4 inches high.
The EP22 has an 11.5-inch glass top shelf across the top of the face panels. Hatco's EP5 and EP36 pass-over guards have a face panel and end panels only, with no top shelf.
It mounts to stainless steel, natural and engineered solid stone and laminate countertops. Screws are not included; Hatco recommends 2-inch long #8 countersink screws for most surfaces.
Hatco states that 18-inch deep end panels are required to meet NSF standards and that other side panels may not. This model has 15-inch end panels, so check with your health inspector first; the same size with 18-inch end panels is EP22-13218.
Hatco builds custom Flav-R-Shield configurations, such as other panel sizes, black or other post finishes, square glass corners, light bars and above or below counter flanges. Those are made to order as separate units; ask us for a quote.
Hatco lists a warranty of one year, parts only.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | EP22-13215 |
| Series | Flav-R-Shield EP22 |
| Type | Full-Service Pass-Over Sneeze Guard, Stationary |
| Number of Bays | 4 |
| Shipping Weight | 118 lb. |
| Shipping Note | May ship in multiple boxes |
| Width | 132 Inches |
| Width Measured | Post center to post center |
| Outside Flange Width | 134 Inches |
| Inside Flange Width | 130 Inches |
| Depth | 15 Inches |
| Depth Measured | Post center to post center |
| Outside Flange Depth | 17 Inches |
| Height | 17.25 Inches |
| Top Shelf Depth | 11.5 Inches |
| Glass | 0.25 Inch thick tempered glass, 0.75 Inch radius corners, flat polished edges |
| Panels | Glass face panels, 11.5 Inch glass top shelf, two 15 Inch deep glass end panels |
| Posts | 1 Inch diameter SAE 304 brushed stainless steelfront posts tilted back to 80 degrees |
| Flanges | 2 Inch diameter stainless steel finish with tight-fitting flange covers that hide the screws |
| Mounting Surfaces | Stainless steel, natural and engineered solid stone, laminate countertops |
| Fasteners | Not included2 Inch long #8 countersink screws recommended for most surfaces |
| Certifications | SGCC |
| NSF Note | Hatco: 18 Inch deep end panels are required to meet NSF standards; 15 Inch side panels may not meet NSF |
| Country of Origin | Made in the USA |
| Warranty | 1 Year Parts Only |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
