Hatco EP36-48 Flav-R-Shield Full-Service Pass-Over Glass Sneeze Guard, 48" W x 18" D x 22-1/8" H, 2 Bays
A 48-inch fixed glass sneeze guard that shields food on a full-service counter with a glass face panel and two 18-inch end panels.
The Hatco Flav-R-Shield EP36-48 is a stationary full-service pass-over sneeze guard for buffet lines and serving stations. It spans 48 inches from post center to post center in 2 bays and stands 22-1/8 inches high. It has a glass face panel and two 18-inch deep glass end panels; the side panels include back support legs. The 1/4-inch tempered glass sits on 1-inch brushed 304 stainless steel posts that screw down to stainless, stone or laminate counters through covered 2-inch flanges.
Mark the post positions before you drill: the guard needs 50" of counter length at the outside flanges.
Panels are 0.25-inch thick tempered glass with 0.75-inch radius corners and flat polished edges for a clean look.
The two 18-inch glass side panels include back support legs.
1-inch diameter SAE 304 brushed stainless steel posts carry the glass.
2-inch diameter stainless steel finish flanges have tight-fitting covers that hide the mounting screws and make the base easier to wipe clean.
Mounts to stainless steel, natural and engineered solid stone surfaces and laminate countertops.
The EP36-48 is 48 inches from post center to post center, 50 inches at the outside of the flanges and 46 inches between the inside of the flanges. It is 18 inches deep and 22-1/8 inches high.
The two 18-inch glass side panels include back support legs, and depth is measured from the post center to the end of the glass.
It mounts to stainless steel, natural and engineered solid stone and laminate countertops. Screws are not included; Hatco recommends 2-inch long #8 countersink screws for most surfaces.
Hatco says the 18-inch deep end panels meet NSF standards, and the spec sheet carries the NSF Component and SGCC safety glazing marks.
Hatco builds custom Flav-R-Shield configurations, such as other panel sizes, black or other post finishes, square glass corners, light bars and above or below counter flanges. Those are made to order as separate units; ask us for a quote.
Hatco lists a warranty of one year, parts only.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | EP36-48 |
| Series | Flav-R-Shield EP36 |
| Type | Full-Service Pass-Over Sneeze Guard, Stationary |
| Number of Bays | 2 |
| Shipping Weight | 41 lb. |
| Shipping Note | May ship in multiple boxes |
| Width | 48 Inches |
| Width Measured | Post center to post center |
| Outside Flange Width | 50 Inches |
| Inside Flange Width | 46 Inches |
| Depth | 18 Inches |
| Depth Measured | Post center to end of glass |
| Height | 22.125 Inches |
| Glass | 0.25 Inch thick tempered glass, 0.75 Inch radius corners, flat polished edges |
| Panels | Glass face panel, two 18 Inch deep glass end panels with back support legs |
| Posts | 1 Inch diameter SAE 304 brushed stainless steel |
| Flanges | 2 Inch diameter stainless steel finish with tight-fitting flange covers that hide the screws |
| Mounting Surfaces | Stainless steel, natural and engineered solid stone, laminate countertops |
| Fasteners | Not included2 Inch long #8 countersink screws recommended for most surfaces |
| Certifications | SGCC, NSF Component |
| NSF Note | 18 Inch deep end panels meet NSF standards per Hatco |
| Country of Origin | Made in the USA |
| Warranty | 1 Year Parts Only |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
