Hatco EP5-RING-144 Flav-R-Shield Full-Service Pass-Over Glass Sneeze Guard, Adjustable Ring Brackets, 144" W x 18" D x 25" H, 4 Bays
A 144-inch, 25-inch-high glass sneeze guard whose ring brackets let you set the glass angle to suit a full-service line.
The Hatco Flav-R-Shield EP5-RING-144 is a stationary full-service pass-over sneeze guard for buffet lines and serving stations. It spans 144 inches from post center to post center in 4 bays and stands 25 inches high. It has glass face panels and two 18-inch deep glass end panels, held by patented ring adjustable brackets with locking points every 15 degrees. The 1/4-inch tempered glass sits on 1-inch brushed 304 stainless steel posts that screw down to stainless, stone or laminate counters through covered 2-inch flanges.
Mark the post positions before you drill: the guard needs 146" of counter length at the outside flanges.
Patented ring adjustable brackets have locking points every 15 degrees, so the glass angle can be set to the line.
Panels are 0.25-inch thick tempered glass with 0.75-inch radius corners and flat polished edges for a clean look.
1-inch diameter SAE 304 brushed stainless steel posts carry the glass.
2-inch diameter stainless steel finish flanges have tight-fitting covers that hide the mounting screws and make the base easier to wipe clean.
Mounts to stainless steel, natural and engineered solid stone surfaces and laminate countertops.
The EP5-RING-144 is 144 inches from post center to post center, 146 inches at the outside of the flanges and 142 inches between the inside of the flanges. It is 18 inches deep and 25 inches high.
The patented ring adjustable brackets have locking points every 15 degrees, so the glass panels can be set and locked at the angle the line needs.
It mounts to stainless steel, natural and engineered solid stone and laminate countertops. Screws are not included; Hatco recommends 2-inch long #8 countersink screws for most surfaces.
Hatco says the 18-inch deep end panels meet NSF standards, and the spec sheet carries the NSF Component and SGCC safety glazing marks.
Hatco builds custom Flav-R-Shield configurations, such as other panel sizes, black or other post finishes, square glass corners, light bars and above or below counter flanges. Those are made to order as separate units; ask us for a quote.
Hatco lists a warranty of one year, parts only.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | EP5-RING-144 |
| Series | Flav-R-Shield EP5-RING |
| Type | Full-Service Pass-Over Sneeze Guard, Stationary |
| Number of Bays | 4 |
| Shipping Weight | 154 lb. |
| Shipping Note | May ship in multiple boxes |
| Width | 144 Inches |
| Width Measured | Post center to post center |
| Outside Flange Width | 146 Inches |
| Inside Flange Width | 142 Inches |
| Depth | 18 Inches |
| Depth Measured | Post center to post center |
| Outside Flange Depth | 20 Inches |
| Height | 25 Inches |
| Glass | 0.25 Inch thick tempered glass, 0.75 Inch radius corners, flat polished edges |
| Panels | Glass face panels, two 18 Inch deep glass end panels |
| Posts | 1 Inch diameter SAE 304 brushed stainless steel |
| Flanges | 2 Inch diameter stainless steel finish with tight-fitting flange covers that hide the screws |
| Brackets | Patented ring adjustable brackets, locking points every 15 degrees |
| Mounting Surfaces | Stainless steel, natural and engineered solid stone, laminate countertops |
| Fasteners | Not included2 Inch long #8 countersink screws recommended for most surfaces |
| Certifications | SGCC, NSF Component |
| NSF Note | 18 Inch deep end panels meet NSF standards per Hatco |
| Country of Origin | Made in the USA |
| Warranty | 1 Year Parts Only |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
