Hatco ES90-72 Flav-R-Shield Self-Service Sneeze Guard, 72" W, 2 Bays, 3/8" Tempered Glass
A 72" wide self-service glass sneeze guard that bolts to a buffet or serving counter and keeps food covered while guests serve themselves.
The Hatco Flav-R-Shield ES90-72 is a stationary single-sided self-service sneeze guard for buffet lines and serving stations. It spans 72" post center to post center in 2 bays, stands 22-5/8" high and has an adjustable glass face panel, a glass top shelf and two glass end panels, all in 3/8" tempered glass. 1" brushed stainless steel posts sit in 2" flanges with covers that hide the mounting screws.
Mark flange locations from the post center spacing: 72" total, 36" per bay.
3/8" tempered glass with 3/4" radius corners and flat polished edges on every panel.
2" stainless steel finish flanges take tight-fitting covers that hide the mounting screws and are easier to wipe clean.
The face panel sits on adjustable Orbit brackets; Hatco's installation guide sets the angle in 15 degree steps.
1" diameter SAE 304 brushed stainless steel posts with 2 bays across 72".
Mounts to stainless steel, natural and engineered solid stone, and laminate counters.
The posts are 72" apart center to center and 16-1/4" apart front to back. Outside the end panels the unit is 74-3/8" wide, and it stands 22-5/8" high.
Each post sits in a 2" flange that screws to the counter. Hatco recommends 2" long #8 countersunk screws for most surfaces; requirements vary by surface and fasteners are not included.
The spec sheet shows the NSF Component and SGCC safety glazing marks. Hatco's installation guide says to seal the set screw heads with NSF-approved silicone and keep the bottom of the end panels no more than 1-1/2" above the counter for NSF compliance.
Hatco offers a patented Easy-Set Friction Hinge that lets the front glass be set to any angle with one hand, plus custom hardware, glass and lighting through its sneeze guard configurator. This listing is the standard model.
Hatco states that all Flav-R-Shield sneeze guards are custom by nature and are non-returnable, so confirm the counter size before you order.
Hatco lists a one-year parts-only warranty. Its installation guide notes that abrasive cleaners or cloths void the warranty.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | ES90-72 |
| Series | Flav-R-Shield ES90 |
| Type | Self-Service Sneeze Guard |
| Number of Bays | 2 |
| Width per Bay | 36" Post Center to Post Center |
| Shipping Weight | 266 lb. |
| Packaging | May Ship in Multiple Boxes |
| Width | 72 Inches |
| Width Measured | Center of Post to Center of Post |
| Outside Width | 74-3/8" End Panel to End Panel |
| Inside Flange Width | 70" |
| Depth | 16-1/4 Inches |
| Depth Measured | Center of Post to Center of Post |
| Height | 22-5/8 Inches |
| End Panel Size | 19-3/8" H x 24-3/16" D |
| Glass Panels | Adjustable Face PanelTop ShelfTwo End Panels |
| Posts | 1" Diameter SAE 304 Brushed Stainless Steel |
| Glass | 3/8" Thick Tempered Glass3/4" Radius CornersFlat Polished Edges |
| Flanges | 2" Diameter Stainless Steel Finish with Flange Covers that Hide the Screws |
| Mounting Surfaces | Stainless SteelNatural and Engineered Solid StoneLaminate |
| Fasteners | #8 Countersunk Screws, 2" Long, Recommended for Most SurfacesNot Included |
| Easy-Set Friction Hinge | Patented Hinge Lets the Front Glass Be Set to Any Angle with One HandCustom Option |
| Custom Configurations | Hardware, Glass and Lighting through Hatco |
| Certifications | NSF Component, SGCC |
| Made In | USA |
| Warranty | 1 Year Parts Only |
| Returns | Custom by Nature, Non-Returnable per Hatco |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
