Hatco FR2-9B Hydro-Heater Food Rethermalizer / Bain-Marie Heater, 9 kW, 208V Balanced 3-Phase

Hatco FR2-9B Hydro-Heater Food Rethermalizer / Bain-Marie Heater, 9 kW, 208V Balanced 3-Phase

HatcoSKU: HAT-FR2-9B

Price:
Regular price$2,423.30
  • Warranty · 1-yr Parts and Labor

Secure checkout

Apple Pay Diners ClubDiscoverGoogle Pay Mastercard Shop Pay Visa

Talk to an equipment specialist

Mon–Sat 8 AM–5 PM ET

Questions about size, power, delivery or a quote for several units?

Call

Will it fit · Will it plug in

Outside (W × D × H)7‑3/4" × 17‑1/16" × 12‑3/8"
Power208V · 25 A at 208V
Temperature140°F to 190°F
Shipping weight34 lb.
ListedcULus, UL Classified ANSI/NSF 4

Highlights

  • 9.0 kW Hydro-Heater for a bain-marie or food rethermalizer water bath
  • Electronic controller with digital display, adjustable 140°F to 190°F
  • Heating element wrapped outside the flow tube, never in contact with the water
  • 208V, balanced 3-phase, 25 A at 208V; hardwired
  • 7-3/4" W x 17-1/16" D x 12-3/8" H; 34 lb. shipping weight
  • Low-water cut-off and temperature monitor standard; cULus, UL Classified NSF 4
  • 1-year parts and labor warranty

Specifications

ManufacturerHatco
Model NumberFR2-9B
SeriesFR2 Hydro-Heater Food Rethermalizer / Bain-Marie Heater
TypeUnder-Vessel Electric Water Heater for Bain-Marie or Food Rethermalizer
Shipping Weight34 lb.
Width7-3/4"
Depth17-1/16"
Height12-3/8"
Width with Auto-Fill9-1/2"
Power9.0 kW
Voltage208V
PhaseBalanced 3-Phase
Hertz50/60 Hz
Amps25 A at 208V
Circuit Breaker and Wire208V: 40 A breaker, 10 AWG wire
ConnectionHardwired, Breaker or Fused Disconnect Mounted Remote, by Contractor
Temperature Range140°F to 190°F
SizingOne Heater per Bain-Marie up to 6 ft., Min. 750 W per sq. ft. for Bain-Marie or Steam Table, Min. 2,000 W per sq. ft. for Rethermalizer
Drain3/4" Hose Connection, Drain Outlet and Clean-Out Caps
BafflePerforated Water Baffle Required, Supplied by Installer
Water QualityTreat and Soften Water over 3.0 Grains per Gallon
Heating Chamber1 to 3 Stainless Steel Tubes with External Spiral Heating Elements
ExteriorStainless Steel Front, Powder-Coated Body
Control TypeElectronic Controller with Digital Display, On/Off Switch
SafetyLow-Water Cut-Off, Electronic Temperature Monitor
Clearance3-1/2" from Bottom of Unit to Combustible Surfaces, Indoors, Room Air at Least 70°F
Factory OptionsAll Stainless Steel Body and Base, Auto-Fill Solenoid, Remote Mounted Control, Security Package, Torx Screws and Control Cover
AccessoriesFR2-FLUSH Flush Kit: Flush Hose, Cleaning Brush, Stopper and Adapter
CertificationscULus, UL Classified ANSI/NSF 4
NSF 4 NoteClassified for Construction Only, Complete Rethermalizer Must Be Listed by the Vessel Maker
Country of OriginMade in USA
Warranty1 Year Parts and Labor

Resources & Documents

Specs

Manufacturer Hatco
Model Number FR2-9B
Series FR2 Hydro-Heater Food Rethermalizer / Bain-Marie Heater
Type Under-Vessel Electric Water Heater for Bain-Marie or Food Rethermalizer
Shipping Weight 34 lb.
Width 7-3/4 Inches
Depth 17-1/16 Inches
Height 12-3/8 Inches
Width with Auto-Fill 9-1/2"
Power 9.0 kW
Voltage 208 Volts
Phase Balanced 3-Phase
Hertz 50/60 Hz
Amps 25 A at 208V
Circuit Breaker and Wire 208V: 40 A breaker, 10 AWG wire
Connection HardwiredBreaker or Fused Disconnect Mounted Remote, by Contractor
Temperature Range 140°F to 190°F
Sizing One Heater per Bain-Marie up to 6 ft.Min. 750 W per sq. ft. for Bain-Marie or Steam TableMin. 2,000 W per sq. ft. for Rethermalizer
Drain 3/4" Hose ConnectionDrain Outlet and Clean-Out Caps
Baffle Perforated Water Baffle Required, Supplied by Installer
Water Quality Treat and Soften Water over 3.0 Grains per Gallon
Heating Chamber 1 to 3 Stainless Steel Tubes with External Spiral Heating Elements
Exterior Stainless Steel FrontPowder-Coated Body
Control Type Electronic Controller with Digital DisplayOn/Off Switch
Safety Low-Water Cut-OffElectronic Temperature Monitor
Clearance 3-1/2" from Bottom of Unit to Combustible SurfacesIndoors, Room Air at Least 70°F
Factory Options All Stainless Steel Body and BaseAuto-Fill SolenoidRemote Mounted ControlSecurity Package, Torx Screws and Control Cover
Accessories FR2-FLUSH Flush Kit: Flush Hose, Cleaning Brush, Stopper and Adapter
Certifications cULus, UL Classified ANSI/NSF 4
NSF 4 Note Classified for Construction OnlyComplete Rethermalizer Must Be Listed by the Vessel Maker
Country of Origin Made in USA
Warranty 1 Year Parts and Labor

Certifications

cULus
UL Classified ANSI/NSF 4
Call

Description

A digital-control water heater that mounts under a bain-marie or rethermalizer and holds the bath at 140°F to 190°F.

Hatco FR2-9B Hydro-Heater bain-marie heater with digital controller, front angle view

The Hatco FR2-9B is a 9.0 kW FR2 Hydro-Heater for food rethermalizers and bain-maries. It supplies temperature-controlled water to a vessel mounted above it. The heating element is wrapped around the outside of a tubular water chamber, so it never touches the water, and an electronic controller with a digital display holds the set point. This model is built for 208V, balanced three phase.

Will it fit · Will it hook up

Outside size
7-3/4" W x 17-1/16" D x 12-3/8" H; 9-1/2" W with the Auto-Fill option
Mounting
Under the sink or holding vessel; installer supplies a perforated water baffle
Power
9.0 kW, 208V, balanced 3-phase, 50/60 Hz; hardwired
Circuit
208V: 40 A breaker, 10 AWG wire
Vessel size
One heater per bain-marie up to 6 ft. long; at least 750 W per sq. ft. of vessel top for a bain-marie, 2,000 W per sq. ft. for a rethermalizer
Drain
3/4" hose connection to drain
Clearance
3-1/2" from the bottom of the unit to combustible surfaces; indoors, room air at least 70°F

Water over 3.0 grains of hardness per gallon must be treated and softened before it reaches the heater.

Digital set point

An electronic controller with a digital display holds the water at the set point, adjustable from 140°F to 190°F.

Element outside the water

A spiral heating element wraps the outside of the flow tube, so it never touches the water.

Free-flow design

Hatco free-flow technology moves water through the tubular chamber for a responsive, efficient heat-up.

Low-water cut-off included

A low-water cut-off system and an electronic temperature monitor come standard.

Easy to clean

A drain outlet and clean-out caps give access to the tubes. A flush kit is sold as an accessory.

Delivery and setup

  • Inspect the carton for damage before you sign, and note any damage on the delivery receipt.
  • Hatco ships the Hydro-Heater fully assembled, with gaskets and fittings, ready to mount under the vessel.
  • A qualified installer must hardwire the unit; the breaker or fused disconnect is mounted remote and wired by the electrical contractor.
  • Install a perforated water baffle in the vessel (not supplied) and place the heater no more than 3 ft. from either end of the vessel.
  • Fill the vessel before you turn on power. If you order the Auto-Fill option, the water supply needs adequate backflow protection.

Questions buyers ask

Does it come with the water vessel?

No. The FR2 is the heating unit only. It attaches to the bottom of a vessel or sink you supply and feeds it hot water. The perforated baffle is supplied by the installer.

What voltage and circuit does it need?

Hatco builds the FR2-9B for 208V, balanced three phase. At 208V it draws 25 A on a 40 A breaker. Tell us your voltage when you order.

How big a bain-marie can one heater serve?

Hatco calls for one FR2 per bain-marie up to 6 ft. long and at least two above 6 ft. Size it at a minimum of 750 W per sq. ft. of vessel top for a bain-marie, or 2,000 W per sq. ft. for a rethermalizer.

What options are available?

At the time of purchase you can add an all stainless steel body and base, an Auto-Fill solenoid, a remote mounted control or a security package with Torx screws and a control cover.

Is it NSF listed for rethermalizing?

The FR2 is UL Classified to NSF 4 for construction only. The vessel maker must have the complete rethermalizer tested and listed to NSF Standard 4.

What warranty does it have?

Hatco gives the FR2 a 1-year parts and labor warranty. Failures caused by lime or sediment buildup are not covered.

9.0 kW Hydro-HeaterElement never touches the water.
140°F to 190°FDigital controller and display.
208V 3-PhHardwired connection.
Low-Water Cut-OffStandard on every FR2.

Specs

Manufacturer Hatco
Model Number FR2-9B
Series FR2 Hydro-Heater Food Rethermalizer / Bain-Marie Heater
Type Under-Vessel Electric Water Heater for Bain-Marie or Food Rethermalizer
Shipping Weight 34 lb.
Width 7-3/4 Inches
Depth 17-1/16 Inches
Height 12-3/8 Inches
Width with Auto-Fill 9-1/2"
Power 9.0 kW
Voltage 208 Volts
Phase Balanced 3-Phase
Hertz 50/60 Hz
Amps 25 A at 208V
Circuit Breaker and Wire 208V: 40 A breaker, 10 AWG wire
Connection HardwiredBreaker or Fused Disconnect Mounted Remote, by Contractor
Temperature Range 140°F to 190°F
Sizing One Heater per Bain-Marie up to 6 ft.Min. 750 W per sq. ft. for Bain-Marie or Steam TableMin. 2,000 W per sq. ft. for Rethermalizer
Drain 3/4" Hose ConnectionDrain Outlet and Clean-Out Caps
Baffle Perforated Water Baffle Required, Supplied by Installer
Water Quality Treat and Soften Water over 3.0 Grains per Gallon
Heating Chamber 1 to 3 Stainless Steel Tubes with External Spiral Heating Elements
Exterior Stainless Steel FrontPowder-Coated Body
Control Type Electronic Controller with Digital DisplayOn/Off Switch
Safety Low-Water Cut-OffElectronic Temperature Monitor
Clearance 3-1/2" from Bottom of Unit to Combustible SurfacesIndoors, Room Air at Least 70°F
Factory Options All Stainless Steel Body and BaseAuto-Fill SolenoidRemote Mounted ControlSecurity Package, Torx Screws and Control Cover
Accessories FR2-FLUSH Flush Kit: Flush Hose, Cleaning Brush, Stopper and Adapter
Certifications cULus, UL Classified ANSI/NSF 4
NSF 4 Note Classified for Construction OnlyComplete Rethermalizer Must Be Listed by the Vessel Maker
Country of Origin Made in USA
Warranty 1 Year Parts and Labor

Certifications

cULus
UL Classified ANSI/NSF 4

Payment & Security

Apple Pay Diners Club Discover Google Pay Mastercard Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

What Our Customers Say

Related Products

Recently viewed