Hatco FSD-1X Flav-R-Savor Humidified Holding & Display Cabinet, Standard Height, 1-Door, 3-Tier Pan Rack, 120V
A countertop glass cabinet that holds pizza, fried foods and bakery items hot and moist with controlled heat and humidity while it sells them.
The Hatco Flav-R-Savor FSD-1X is the standard height single-door model with a 3-tier stationary pan rack, no motor. Precise heat and humidity keep food moist with hold times of 1 to 4 hours, and a tempered glass door and side panels show the product under LED lighting. It plugs into a standard 120V outlet and draws 11.8 amps.
NSF requires cabinets over 80 lb. to be sealed to the counter or raised; Hatco offers 4" adjustable legs for that, which add height.
Set the air temperature from 80°F to 195°F and humidity from level 1 to 5. The moist heat blankets the food to stop it drying out.
The 3-tier pan rack holds half-size sheet pans (not included). Hatco notes -X models have no rack motor and cannot be converted later.
The 3/4 gallon stainless reservoir fills through a front water cup and runs about 4 to 8 hours per fill. Low-water protection warns staff and protects the element.
Tempered glass door and side panels hold heat and show the food under energy-efficient LED lights.
The large access door is field reversible, so it can hinge on either side.
1414 W at 11.8 A on a NEMA 5-15P plug and 6 ft. cord. Hatco says the 15-amp cord set runs on a standard outlet.
Hatco designs it for pizza, fried foods, bakery items, sandwiches and similar hot foods, with hold times of 1 to 4 hours.
Air temperature sets from 80°F to 195°F in single degrees, and humidity from level 1 (lowest) to 5 (highest).
120V, 60 Hz, single phase. It draws 1414 watts and 11.8 amps through a NEMA 5-15P plug on a 6 ft. cord.
The reservoir runs about 4 to 8 hours depending on settings and door openings. Refill when "LO H2O" flashes; a refill is about 3 quarts.
Yes. Hatco sells other racks for FSD cabinets, such as multi-purpose, circle and pan racks. Circle racks on -X models need the motorless rack coupling.
Clear anodized aluminum is standard. Hatco offers Designer colors, mechanical controls, neutral white LED lighting and sign holders as factory options, plus 4" adjustable legs and a decorative kit.
Hatco lists an 18-month limited warranty from shipment or registration, whichever is later, with 1 year parts and labor plus 1 more year parts only on metal-sheathed air heating elements.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | FSD-1X |
| Series | Flav-R-Savor Humidified Holding and Display Cabinet, FSD Standard Height |
| Type | Countertop Humidified Display Cabinet, 1-Door |
| Shipping Weight | 111 lb. |
| Width | 22.42 Inches |
| Depth | 24.11 Inches |
| Height | 27.54 Inches |
| Legs | 1" Standard Legs Included in Height4" Adjustable Legs Optional |
| Cabinet Opening | 19" W x 18.62" H |
| Footprint | 19-15/16" W x 20" D |
| Voltage | 120 Volts |
| Hertz | 60 Hz |
| Phase | 1 |
| Wattage | 1414 Watts |
| Amps | 11.8 Amps |
| Plug Type | NEMA 5-15P |
| Cord | 6 ft.Left-Hand Side Panel, Lower Right Corner, Facing Controls |
| Temperature Range | 80°F to 195°F |
| Humidity Settings | Levels 1 to 5 |
| Water Reservoir | 3/4 Gallon Stainless SteelAbout 4 to 8 Hours per FillLow-Water Protection |
| Hold Time | 1 to 4 Hours |
| Rack | 3-tier stationary pan rack, no motor |
| Max Pan Size | 19" Diameter Pizza Pan through the Door |
| Control Type | Digital Temperature and Humidity ControlsPower On/Off Switch |
| Exterior | Clear Anodized AluminumTempered Glass Door and Side Panels |
| Interior | Stainless Steel Top and BottomNickel-Plated Rack |
| Doors | 1 Door, Field Reversible |
| Lighting | LED, Warm White |
| Factory Options | Designer ColorsMechanical ControlsNeutral White LED Lighting7-1/2" Display Sign Holder |
| Accessories | 4" Adjustable LegsAlternate RacksMotorless Rack CouplingDecorative Kit |
| Water Quality | Treat and Soften Water over 3 Grains per Gallon Hardness |
| Clearance | 1" from Combustible WallsRoom at Least 70°F |
| Certifications | cULus, UL EPH Classified ANSI/NSF 4 |
| Country of Origin | Made in the USA |
| Warranty | 18 Months Limited |
| Warranty Details | 18 months from shipment or registration, whichever is laterMetal-sheathed air heating elements: 1 year parts and labor plus 1 more year parts onlyBulbs, LED tubes, glass and fuses excluded |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
