Hatco FSHC-6W1 Flav-R-Savor Low Profile Humidified Portable Holding Cabinet, 1 Door, 6 Pan Slides, 120V
Description
A mobile heated cabinet with adjustable humidity that holds cooked food at serving temperature for hours before the rush.
The Hatco FSHC-6W1 is a low profile Flav-R-Savor portable holding cabinet for schools, hospitals, concessions and cafeterias. A thermostat and a humidity control work together with low velocity convected air, so you can cook ahead of peak periods and hold food moist and hot. It holds six 18" x 26" sheet pans or six 2/1 Gastronorm pans on 3" centers. With the optional 2" low profile casters it fits under a standard kitchen counter. It plugs into a standard 120V NEMA 5-15 outlet.
Will it fit · Will it hook up
- Outside size
- 25.39" W x 29.63" D x 32.11" H on 4" casters
- Door opening
- 21.5" W x 19" H
- Power
- 120V, 60 Hz, 1-phase, 1697 W, 14.1 A; 6 ft. recessed cord with NEMA 5-15P plug
- Water
- 3/4 gallon reservoir filled by hand; no plumbing. Distilled water recommended
- Clearance
- At least 1" from combustible walls; indoors at 70°F or warmer
- Under-counter
- With 2" low profile locking casters the overall height is 29-3/4"
Measure doorways: the smallest outside dimension is the 25.39" width.
Heat plus humidity
Separate temperature and humidity controls with a digital temperature readout. The humidity system keeps food from drying out during long holds.
6 adjustable slides
Angle slides hold pans on 3" centers or 1-1/2" centers and lift out for cleaning. Pans are not included.
Glass door
Aluminum framed tempered glass door lets staff see product without opening it. Doors are field reversible.
Top-mounted controls
Electrical parts, controls, water reservoir and temperature readout sit at the top for easy access.
Mobile on casters
Four 4" casters with 5-1/8" clearance; the front two swivel and lock. Legs or stacking hardware can replace the casters at order.
Hatco holding guide
The manual lists settings, for example fried chicken pieces up to 5 hours on high humidity at 175°F, and wrapped sandwiches 2 hours on medium at 160°F.
Delivery and setup
- Hatco lists the shipping weight at about 167 lb. Inspect the carton for damage before you sign, and note any damage on the delivery receipt.
- Casters ship loose inside the cabinet. Two people lay the unit on its back on cardboard to install them; never lay it on the control panel side.
- Fill the reservoir with clean water: about 80 oz. on the first fill and about 48 oz. per refill. A full reservoir runs about 4 to 8 hours.
- Allow 30 minutes to preheat with a full reservoir before loading food that is already hot.
- Water over 3.0 grains per gallon of hardness must be treated. Hatco says not to use deionized or reverse osmosis water.
Questions buyers ask
What outlet does it need?
120V, 60 Hz, single phase, 1697 watts, 14.1 amps. It has a 6 ft. recessed cord with a NEMA 5-15P plug at the back, upper right side.
How many pans does it hold?
Six 18" x 26" sheet pans or six 2/1 Gastronorm pans on 3" centers. With extra pan slides it holds eleven sheet pans or 2/1 Gastronorm pans on 1-1/2" centers, or twelve 20" x 12" x 2-1/2" hotel pans, with extra pan slides. Pans are not included.
Does it need a water line?
No. You fill the 3/4 gallon reservoir by hand. Hatco recommends distilled water; failures from lime or mineral deposits are not covered by warranty.
Can it fit under a counter?
Yes, with the optional 2" low profile locking casters the overall height is 29-3/4", so it fits under normal kitchen counters.
What options are available?
At order: Designer Black or stainless steel side panels and top, a stainless steel door or heavy-duty stainless door with positive latch handle, 2" low profile casters, stacking hardware and a cord holding bracket. Extra pan slides can be added any time.
What warranty does it have?
Hatco's limited warranty runs 18 months from shipment or registration, whichever is later. The metal-sheathed air heating elements carry 1 year parts and labor plus 1 more year parts only. Failures from lime or mineral buildup are not covered.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | FSHC-6W1 |
| Series | Flav-R-Savor Low Profile Portable Holding Cabinet, Humidified |
| Type | Humidified Portable Holding Cabinet, Single Door |
| Shipping Weight | 167 lb. |
| Width | 25.39 Inches |
| Depth | 29.63 Inches |
| Height | 32.11 Inches |
| Height Note | Height on Standard 4" Casters29.68" on Optional 2" Low Profile Casters33.02" on 6" Legs |
| Cabinet Opening | 21.5" W x 19" H |
| Top Surface | 25.39" W x 25.87" D |
| Pan Slides | 6 Sets of Adjustable Angle Slides3" or 1-1/2" Centers |
| Pan Capacity | 6 Sheet Pans 18" x 26" or 6 Gastronorm 2/1 on 3" Centers |
| Pan Capacity With Extra Slides | 11 Sheet Pans or 11 Gastronorm 2/1 on 1-1/2" Centers12 Hotel Pans 20" x 12" x 2-1/2" |
| Water Reservoir | 3/4 GallonFirst Fill About 80 oz.Refill About 48 oz.About 4-8 Hours per Fill |
| Voltage | 120 Volts |
| Hertz | 60 Hz |
| Phase | 1 |
| Wattage | 1697 Watts |
| Amps | 14.1 Amps |
| Plug Type | NEMA 5-15P |
| Cord | 6 ft., Recessed, Back of Unit, Upper Right Side |
| Controls | Temperature Control, Humidity Control, Digital Cabinet Temperature Readout, Low Water Indicator, Power Switch |
| Construction | Stainless Steel and Powder Coated Top, Sides and BackInsulated Side WallsLow Velocity Convected Air |
| Door | 1 DoorAluminum Framed Tempered GlassField Reversible |
| Color | Silver Gray StandardIFS Anti-Microbial Powder Coat |
| Casters | 4" Diameter, 5-1/8" ClearanceFront Swivel With Wheel Locks |
| Factory Options | Designer Black or Stainless Steel Side Panels and TopStainless Steel DoorHeavy-Duty Stainless Door With Positive Latch Handle |
| Mounting Options | 2" Low Profile Locking Casters4" or 6" LegsStacking HardwareCord Holding Bracket |
| Accessories | Extra Pan Slides |
| Clearance | 1" Minimum From Combustible Walls and MaterialsIndoors, 70°F Minimum Ambient |
| Water Quality | Treat Water Over 3.0 Grains per GallonDistilled Water RecommendedNo Deionized or Reverse Osmosis Water |
| Certifications | cULus, UL EPH Classified ANSI/NSF 4, CE, UKCA |
| Country of Origin | Made in USA |
| Warranty | 18 Months Limited |
| Warranty Notes | From Shipment or Registration, Whichever Is LaterHolding Cabinet Air Heating Elements: 1 Year Parts and Labor Plus 1 Additional Year Parts OnlyLime or Mineral Damage Not Covered |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What Our Customers Say


