Hatco GR2AHL-24D Glo-Ray Designer High Watt Dual Strip Heater with Lights, 27-1/2" W, 3" Spacer, 1,120W, 120, 120/208 or 120/240V
Description
Two high watt infrared heat strips side by side in one 27-1/2" unit, for a deeper pass-through or holding line, with display lights over the food.
The Hatco GR2AHL-24D is a Glo-Ray Designer dual high watt strip heater with lights in a continuous aluminum housing, 27-1/2" wide. Two warmers sit side by side with a 3" spacer, so the unit is 18" deep; Hatco offers a 3" spacer as standard and a 6" spacer as an option. It is rated 1,120 W and comes for 120, 120/208 or 120/240 volt single phase service, chosen at order. Two shatter-resistant coated incandescent display lights light the food. 14" Designer stands, black inset panels and black corner caps are standard. Controls are remote only, so plan on an RMB remote control box, sold separately.
Will it fit · Will it hook up
- Outside size
- 27.5" W x 18" D x 3.5" H housing, without stands
- On stands
- 13.19" to 19.19" overall height on 10" to 16" posts; 14" Designer stands are standard
- Mounting height
- Element 14" to 18" above the food per Hatco, for a target holding width of 24"
- Clearance
- At least 32" above combustible surfaces and 6" from a combustible wall
- Power
- Single phase, set at order: 9.3 A at 120V, 5.8 A at 120/208V, 5.2 A at 120/240V; 1,120 W. Hardwired with 5 ft. leads through 1/2" conduit in the stand
- Controls
- Remote only. Order one RMB control box per heater (not included)
- Light circuit
- 120/208V and 120/240V units have a 120V circuit for the lights and a 208V or 240V circuit for the heating element
The posts stand 23.55" apart (unit width minus 3.95"), so check the counter or shelf length under the unit.
Pre-focused infrared heat
Reflectors focus heat from a tubular metal-sheathed element to hold food at serving temperature without continuing to cook it.
Two strips, deeper coverage
Two warmers mount side by side for a deeper holding area. This unit has the 3" spacer, 18" deep overall; Hatco lists 3" as standard and 6" as an option.
Display lights
Two coated shatter-resistant incandescent lights. A 60 W halogen bulb, extra lamps or no bulbs can be ordered instead.
High watt output
The high watt version is rated 1,120 W at this width. Hatco sets it 14" to 18" above the food, higher than the standard watt model.
Continuous aluminum housing
One continuous aluminum housing resists sagging, offered in widths from 21-1/2" to 87-1/2".
Designer colors
Aluminum finish with black inset panels and corner caps is standard. Warm Red, Black, Gray Granite, White Granite, Navy Blue, Hunter Green or Antique Copper, and dark gray corner caps, are options at order.
Delivery and setup
- Inspect the carton for damage before you sign, and note any damage on the delivery receipt.
- Do not lay the unit on its front or back side; Hatco says damage could occur.
- Have a qualified, licensed electrician hardwire it to local codes with supply wire rated 194°F (90°C). Units are voltage-specific, so check the specification label.
- The stands bolt to the counter with the supplied 1/4" x 1-1/2" hex bolts, through a 1" conduit hole. A metal counter may need a backing plate, not supplied.
- Mount the RMB control box in a cool, dry spot outside the heat zone and away from steam equipment, or the controls will be damaged.
- If the heating element needs a breaker larger than 20 amps, the lights need their own breaker of 20 amps or less.
Questions buyers ask
Does it come with a control?
No. Controls are remote only. Order one RMB remote control box per heater: Hatco lists RMB-3, RMB-7 or RMB-14.
What power does it need?
Single phase, hardwired. 9.3 A at 120V, 5.8 A at 120/208V, 5.2 A at 120/240V, 1,120 W. Choose the voltage at order.
How high do I mount it?
Hatco lists an element height of 14" to 18" above the food for a 24" holding width. Keep it at least 32" above combustible surfaces and 6" from a combustible wall.
3" or 6" spacer?
The 3" spacer is standard and makes the unit 18" deep; the optional 6" spacer makes it 21" deep. This listing is the 3" spacer version. Hatco recommends a dual unit for pass-throughs 18" to 24" deep.
Which bulbs does it use?
Coated shatter-resistant incandescent display bulbs; Hatco P/N 02.30.265.00 for 120V, or 02.30.081.00 halogen. Chef LED bulbs CLED-3000-120 and CLED-4000-120 are an accessory; on high watt units they are for pass-through use only, at least 18" above the surface.
Can I pick colors?
Yes, at order. Housing, inset panels, stands and the remote box come in seven Designer colors, and corner caps in dark gray. Non-standard colors are non-returnable.
What is the warranty?
Hatco covers metal-sheathed food warmer elements for one year parts and labor plus one more year parts-only, and other parts for 18 months. Bulbs, glass and fuses are not covered. Register within 90 days for added coverage.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | GR2AHL-24D |
| Series | Glo-Ray Designer Dual Strip Heater with Lights, High Watt |
| Shipping Weight | 32 lb. |
| Width | 27.5 Inches |
| Depth | 18 Inches |
| Height | 3.5 Inches |
| Height on Stands | 13.19 to 19.19 in. on 10 to 16 in. posts |
| Post Spacing | 23.55 in., unit width minus 3.95 in. |
| Spacer | 3 in.; 3 in. standard makes 18 in. deep, 6 in. optional makes 21 in. deep |
| Voltage | 120, 120/208 or 120/240 Volts |
| Phase | Single Phase |
| Wattage | 1,120 W |
| Amps | 9.3 A at 120V, 5.8 A at 120/208V, 5.2 A at 120/240V |
| Electrical Connection | Hardwired; 5 ft. leads through 1/2 in. conduit in the stand |
| Controls | Remote only; RMB remote control box required, sold separately |
| Light Circuit | 120/208 and 120/240V units: 120V light circuit plus 208 or 240V element circuit |
| Element | Tubular metal-sheathed infrared, pre-focused reflectors |
| Element Height | 14 in. to 18 in. above the food |
| Target Holding Width | 24 in. |
| Number of Bulbs | 2 |
| Bulb Type | Coated shatter-resistant incandescent; 60 W halogen, extra lamps or no bulbs optional |
| Housing | Continuous aluminum |
| Finish | Aluminum standard; Warm Red, Black, Gray Granite, White Granite, Navy Blue, Hunter Green, Antique Copper optional |
| Inset Panels and Corner Caps | Black standard; colored inset panels and dark gray corner caps optional |
| Stands | 14 in. Designer non-adjustable standard; 10, 12, 16 in. stands or 4 in. overhead mounts optional |
| Sneeze Guards | 7.5 in. or 14 in., one or two sides, optional |
| Extended Leads | 1-5, 6-10, 11-15 or 16-20 ft. optional |
| Clearance to Combustibles | 32 in. above combustible surfaces, 6 in. from combustible walls |
| Certifications | cULus, UL EPH Classified ANSI/NSF 4 |
| Country of Origin | Made in the USA logo on spec sheet |
| Warranty | 18 Months Limited, Elements 2 Years |
| Warranty Notes | Metal-sheathed food warmer elements: 1 year parts and labor plus 1 year parts-only; other components 18 months; bulbs, glass and fuses not covered; register within 90 days |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What Our Customers Say

