Hatco GR2SDS-36D Glo-Ray Designer Slant Dual-Shelf Merchandising Warmer, 42-1/4" Wide, 2440 W, 120/208-240V
A slant two-level heated merchandiser that keeps wrapped and boxed hot food on show and at serving temperature on the counter.
The Hatco Glo-Ray Designer GR2SDS-36D is a 42-1/4-inch-wide countertop merchandising warmer with slanted shelves for self-serve and two heated holding levels: a heated base and a heated center shelf, each with its own temperature knob and on/off switch. Pre-focused infrared heat from above aims at the outer edges of the shelf where heat loss is greatest, so wrapped or boxed food holds at serving temperature. It runs on 120/208 or 120/240V, draws 10.2 amps and comes with a 6 ft. cord and NEMA L14-20P plug.
Check that the counter can carry about 200 lb. shipping weight plus food, and keep it away from fans, hoods, air conditioning ducts and exterior doors.
Pre-focused infrared elements above the shelf direct heat to the outer edges of the holding surface, where heat loss is greatest.
A thermostatically controlled, hardcoated heated base runs from room temperature to about 185°F to 200°F. The center shelf has its own knob and switch.
Slanted shelves tilt product toward the customer for self-serve. 14 divider rods sort the display.
4 coated incandescent display lights show the food and protect it from bulb breakage.
Clear anodized aluminum with black inset panels is standard. Six designer colors and inset colors are factory options.
Turn it off, let it cool and wipe it with a damp cloth and a non-abrasive cleaner. Tempered glass side panels lift out.
Hot wrapped or boxed food that is already heated to a safe temperature, such as sandwiches, pizza slices in boxes or packaged entrees. Do not put food directly on the hardcoat surface.
A grounded 120/208 or 120/240V receptacle for the NEMA L14-20P plug. It draws 2440 watts and 10.2 amps. The NEMA L14-20P plug serves either 120/208V or 120/240V; tell us which your building has.
The heated base and center shelf run from room temperature to about 185°F to 200°F, set with separate knobs on the back control panel. Allow 30 minutes to heat up before loading.
Each heated level has 35.87" x 22" of usable heated shelf space (W x D), two levels in all. 14 divider rods split it into lanes.
Clear anodized aluminum with black insets is standard. Warm Red, Black, Gray Granite, White Granite, Navy Blue, Hunter Green and Antique Copper are factory colors; non-standard colors are non-returnable. Hatco lists a 5" sneeze guard on the customer side, plexi-glass flip-up doors, a 60 W halogen bulb and an LED indicating temperature control as factory options, ordered at time of purchase only.
Hatco lists an 18-month limited warranty from shipment or registration, whichever is later, and its manual covers the metal-sheathed heating elements against breakage and burnout for two years. Bulbs, glass and fuses are excluded.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | GR2SDS-36D |
| Series | Glo-Ray Designer Slant Merchandising Display Warmer, GR2SDS |
| Type | Countertop Slant Dual-Shelf Merchandising Warmer |
| Shipping Weight | 200 lb. |
| Width | 42.25 Inches |
| Depth | 26.64 Inches |
| Height | 33.84 Inches |
| Legs | 4" Legs Included in Height |
| Heated Levels | 2Heated Base and Heated Center Shelf |
| Usable Heated Shelf Space | 35.87" x 22" W x D per Level |
| Average Chute Width | 4.23" |
| Divider Rods | 14 |
| Voltage | 120/208-240 Volts |
| Wattage | 2440 Watts |
| Amps | 10.2 Amps |
| Phase | Single Phase |
| Plug Type | NEMA L14-20P |
| Cord | 6 ft.Back of Unit, Top Right Side |
| Temperature Range | 185°F to 200°F |
| Temperature Detail | Heated base and center shelf adjust from room temperature to about 185°F-200°F30 Minutes to Reach Operating Temperature |
| Heating | Pre-Focused Infrared Top Heat, Tubular Metal-Sheathed ElementsThermostatically Controlled Hardcoated Heated Base |
| Control Type | Thermostatic Knobs and Power On/Off Toggle Switches on Back Control Panel |
| Exterior | Clear Anodized AluminumBlack Inset Panels and Corner CapsTempered Glass Side Panels |
| Lighting | 4 Coated Shatter-Resistant Incandescent Lights |
| Standard Accessories | Tempered Glass Side Panels14 Product Divider Rods4" Legs6 ft. Cord and Plug |
| Designer Colors | Warm Red, Black, Gray Granite, White Granite, Navy Blue, Hunter Green, Antique CopperNon-Standard Colors Non-Returnable |
| Inset Panel Colors | Warm Red, Gray Granite, White Granite, Navy Blue, Hunter Green, Antique CopperDark Gray Corner Caps |
| Factory Options | 5" Sneeze Guard on Customer SidePlexi-Glass Flip-Up Doors60 W Halogen BulbLED Indicating Temperature Control |
| Accessories | Additional Stainless Steel Divider RodsFlip-Up Control CoverChef LED Bulbs 3000K or 4000K |
| Clearance | 1" from Combustible Walls and MaterialsIndoors, Room 70°F or WarmerSeal to Counter or Use 4" Legs per NSF |
| Certifications | cULus, UL EPH Classified ANSI/NSF 4 |
| Country of Origin | Made in the USA |
| Warranty | 18 Months Limited |
| Warranty Details | 18 months from shipment or registration, whichever is laterMetal-sheathed heating elements covered against breakage and burnout for two years per the GR2SD manualBulbs, glass and fuses excluded |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
