Hatco GR3SDH-27 Glo-Ray Heated Glass Horizontal Merchandising Warmer, Single Heated Glass Shelf, 27" Model, 997 W, 120V
A heated glass merchandiser that shows every wrapped hot item at once and keeps it warm from above and below.
The Hatco Glo-Ray GR3SDH-27 is the 27-inch horizontal heated glass merchandising warmer with a hardcoated heated base and one heated glass shelf above it. Hatco's patented heated glass radiates heat down onto the food below while conducting heat up to the food on the shelf, so customers see every choice at once. It plugs into a 120V outlet with a NEMA 5-15P plug and draws 8.3 amps.
Leave 3" behind it for the back wall and plan for about 108 lb. shipping weight on the counter.
Each glass shelf radiates heat down onto the product below and conducts heat up to the product on top, so the full display stays warm.
The heated base and each heated glass shelf have their own control knob, from room temperature to about 185°F to 200°F.
Hatco notes the top shelf can show short-term held food where serving temperature is not critical, adding capacity on the same counter space.
LED lights show the food and switch on and off separately from the heat.
Designer Black powder coat with IFS anti-microbial coating is standard. Six colors and a stainless steel body are options.
10 product divider rods and tempered glass side panels keep packaged items in lanes.
Hot wrapped or boxed food that is already heated to a safe temperature. Food must be wrapped, boxed or on a pan on the hardcoat base, and only wrapped or boxed product goes on the glass shelf.
A grounded 120V receptacle for the NEMA 5-15P plug. It draws 997 watts and 8.3 amps.
The base and each glass shelf set from room temperature to about 185°F to 200°F with separate knobs on the back control panel. Allow 30 minutes to heat up.
Hatco says to leave at least 3" from the back of the unit to a back wall, and to avoid fans, hoods, air conditioning ducts and exterior doors.
Designer Black is standard. Warm Red, Gray Granite, White Granite, Navy Blue, Hunter Green and Antique Copper are factory colors, plus a stainless steel body and base. Sneeze guards, plexi-glass flip-up doors, plexi-glass end panels and shelf sign holders are factory options; 4" adjustable legs and extra divider rods are accessories.
The GR3SD manual lists a limited warranty of 1 year from purchase or 18 months from shipment, and covers the unit against breakage and burnout for one year. Bulbs, LED tubes, glass and fuses are excluded.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | GR3SDH-27 |
| Series | Glo-Ray Heated Glass Merchandising Warmer, GR3SDH Horizontal |
| Type | Countertop Horizontal Merchandising Warmer, Single Heated Glass Shelf |
| Shipping Weight | 108 lb. |
| Width | 27.18 Inches |
| Depth | 27.26 Inches |
| Height | 16.09 Inches |
| Height Note | Height Includes Legs |
| Heated Levels | 2Heated Base and 1 Heated Glass Shelf |
| Usable Heated Shelf Space | 22.63" x 20.63" W x D |
| Average Chute Width | 4" |
| Divider Rods | 10 |
| Voltage | 120 Volts |
| Wattage | 997 Watts |
| Amps | 8.3 Amps |
| Phase | Single Phase |
| Plug Type | NEMA 5-15P |
| Cord | 6 ft.Back of Unit, Top Right Side |
| Temperature Range | 185°F to 200°F |
| Temperature Detail | Base and each glass shelf adjust from room temperature to about 185°F-200°F30 Minutes to Reach Operating Temperature |
| Heating | Thermostatically Controlled Hardcoated Heated BasePatented Heated Glass Shelf with Dual Heat Source |
| Control Type | Separate Heat Control Knobs for Base and Each ShelfLights On/Off SwitchPower On/Off SwitchBack Control Panel |
| Exterior | Designer Black Powder Coat with IFS Anti-Microbial CoatingTempered Glass Side Panels |
| Lighting | LED Display Lights |
| Standard Accessories | Tempered Glass Side Panels10 Product Divider RodsLED Display Lights6 ft. Cord and Plug |
| Designer Colors | Warm Red, Gray Granite, White Granite, Navy Blue, Hunter Green, Antique CopperNon-Standard Colors Non-Returnable |
| Factory Options | Stainless Steel Body and Base5" Sneeze Guards, Customer SidePlexi-Glass Flip-Up Doors, One SidePlexi-Glass End PanelsPainted Shelf Sign Holder |
| Accessories | 4" Adjustable LegsAdditional Stainless Steel Divider Rods |
| Clearance | 3" Minimum from Rear of Unit to Back WallIndoors, Room 70°F or WarmerSeal to Counter or Raise on 4" Legs per NSF |
| Certifications | cULus, UL EPH Classified ANSI/NSF 4 |
| Country of Origin | Made in the USA |
| Warranty | 1 Year Limited |
| Warranty Details | 1 year from purchase or 18 months from shipment from Hatco, per GR3SD manualBulbs, LED tubes, glass and fuses excluded |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
