Hatco GR3SDS-27 Glo-Ray Heated Glass Merchandising Warmer, Slant Single Shelf, 27" W, 120V
Description
A 27-inch self-serve warmer with slanted heated glass shelves that keeps wrapped or boxed hot food in full view.
The Hatco GR3SDS-27 is a Glo-Ray heated glass merchandising warmer with slant shelves and two display levels: the heated base and a heated glass shelf. Hatco's patented heated glass conducts heat up to the food on the shelf and radiates heat down onto the food below, over a thermostatically controlled, hardcoated heated base. It comes with tempered glass side panels, 10 product divider rods, LED display lights and a 6 ft. cord and plug, in standard Designer Black.
Will it fit · Will it hook up
- Outside size
- 27.18" W x 26.83" D x 20.51" H, height includes legs
- Heated shelf space
- 22.63" W x 20.63" D per level; average chute width 4"
- Power
- 120V, 997 W, 8.3 A, NEMA 5-15P
- Clearance
- At least 3" from a back wall; room air at least 70°F
Check that a NEMA 5-15R receptacle is within reach of the 6 ft. cord.
Patented heated glass
The heated glass shelf conducts heat up to the product on top and radiates heat down to blanket the product below.
Heated base
A thermostatically controlled, hardcoated heated base adds a second heat source. Settings run from room temperature to about 185°F to 200°F.
Full product view
Slanted glass shelves, tempered glass side panels and LED display lights put every choice at the customer's fingertips.
Divider rods included
10 stainless steel product divider rods sort the display, with an average chute width of 4". Extra rods are an accessory.
Designer finish
Designer Black is standard. Warm Red, Gray Granite, White Granite, Navy Blue, Hunter Green, Antique Copper are no-charge options, and a stainless steel body and base is a factory option.
Delivery and setup
- Inspect the carton for damage before you sign, and note any damage on the delivery receipt.
- Place it on a level counter strong enough for the unit and food, indoors where the room stays at 70°F or warmer, at least 3" from a back wall.
- NSF requires units over 36" wide or over 80 lb. to be sealed to the counter or raised on 4" legs; 4" adjustable legs are an accessory.
- Set the base and shelf controls and allow 30 minutes to reach operating temperature before loading preheated, wrapped or boxed food.
- Clean daily once it is off, unplugged and cool, with non-abrasive cleaners. Do not submerge it or saturate it with water.
Questions buyers ask
What does it plug into?
120V, 997 W, 8.3 A, NEMA 5-15P through a 6 ft. cord and plug.
How much food does it display?
Two levels, each with 22.63" x 20.63" of usable heated space and 10 divider rods in total.
How close can it go to a wall?
Hatco says not closer than 3" to a back wall. Keep it away from drafts from doors, hoods and air vents.
What options are there?
Designer colors (Warm Red, Gray Granite, White Granite, Navy Blue, Hunter Green, Antique Copper), a stainless steel body and base, 5" customer-side sneeze guards, plexi-glass flip-up doors on one side, plexi-glass end panels and painted shelf sign holders. Options are set at order.
What warranty does it have?
Hatco limited warranty: 18 months from shipment or product registration, whichever is later. Bulbs, glass components and fuses are not covered. Hatco also offers 24/7 parts and service assistance in the US and Canada.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | GR3SDS-27 |
| Series | Glo-Ray Heated Glass Merchandising Warmer, GR3SDS |
| Configuration | Slant Single Shelf |
| Shipping Weight | 115 lb. |
| Width | 27.18 Inches |
| Depth | 26.83 Inches |
| Height | 20.51 Inches |
| Dimension Notes | Height includes legs |
| Heated Shelf Space | 22.63 x 20.63 Inches per Level |
| Divider Rods | 10 |
| Average Chute Width | 4 Inches |
| Voltage | 120 Volts |
| Wattage | 997 Watts |
| Amps | 8.3 Amps |
| Plug Type | NEMA 5-15P |
| Phase | Single Phase |
| Cord | 6 ft. Cord and Plug |
| Heat Sources | Heated Glass ShelfThermostatically Controlled Hardcoated Heated Base |
| Temperature Range | Room Temperature to 200°F |
| Display Lights | LED |
| Construction | Tempered Glass Side PanelsStainless Steel Divider Rods |
| Standard Finish | Designer Black |
| Designer Colors | Warm Red, Gray Granite, White Granite, Navy Blue, Hunter Green, Antique CopperNo Charge |
| Factory Options | Stainless Steel Body and Base5 Inch Customer-Side Sneeze GuardPlexi-Glass Flip-Up Doors, One SidePlexi-Glass End PanelsPainted Shelf Sign Holder |
| Accessories | 4 Inch Adjustable LegsAdditional Stainless Steel Divider Rods |
| Certifications | cULus, UL EPH Classified ANSI/NSF 4 |
| Country of Origin | Made in USA |
| Warranty | 18 Months Limited |
| Warranty Notes | From shipment or product registration, whichever is laterLight bulbs, glass components and fuses not covered24/7 parts and service assistance in US and Canada |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What Our Customers Say




