Hatco GR3SDS-27DCT Glo-Ray Heated Glass Merchandiser, Curved Top, Slant Dual Shelf, 27" W, 120V
Description
A 27-inch curved top self-serve warmer that holds wrapped or boxed hot food on 2 slanted, heated levels.
The Hatco GR3SDS-27DCT is a Glo-Ray heated glass merchandiser with a curved top and 2 slanted display levels. Blanket-style elements in the hardcoated base and the upper canopy are thermostatically controlled, and the patented heated glass shelf conducts heat to food above and below. LED lights show the product, and a built-in sign holder at the top front takes your own 26.75" x 3" sign. It comes in standard Designer Black on 2.5" legs.
Will it fit · Will it hook up
- Outside size
- 27.18" W x 27.76" D x 26.32" H, height includes 2.5" legs
- Heated shelf space
- 22.63" W x 20.63" D per level, 2 levels
- Power
- 120V, 1340 W, 11.2 A, NEMA 5-15P
- Clearance
- Control side at least 3", all other sides at least 1" from combustible walls and materials
Check that a NEMA 5-15R receptacle on its own circuit is within reach of the 6 ft. cord.
Heated canopy and base
Blanket-style elements in the hardcoated base and the upper canopy are thermostatically controlled, so the top level is heated from above.
Patented heated glass
The heated glass shelf conducts heat to food above and below. All heated shelves and the canopy run up to 200°F.
Curved top sign holder
The curved top has a built-in front sign holder for your own 26.75" W x 3" H sign.
LED display lights
LED lighting shows the food while using less energy than standard bulbs.
Built-in GFCI
Ground fault circuit interrupters, one for each circuit, are built into the unit and reset with a button.
Delivery and setup
- Inspect the carton for damage before you sign, and note any damage on the delivery receipt.
- Place it on a level counter strong enough for the unit and food, indoors where the room stays at 70°F or warmer, away from exhaust hoods, doors and air vents.
- Keep the control side at least 3" and the other sides at least 1" from combustible walls and materials.
- Turn on only the heat sources you need and allow 15 to 20 minutes to reach operating temperature before loading preheated food. Food must be wrapped, boxed or on a pan, not directly on the hardcoat.
- Clean daily once it is off, unplugged and cool, with non-abrasive cleaners and cloths. Do not submerge it or saturate it with water.
Questions buyers ask
What does it plug into?
120V, 1340 W, 11.2 A, NEMA 5-15P through a 6 ft. cord.
How much food does it hold?
2 slanted levels, each with 22.63" x 20.63" of usable heated space, and 10 divider rods.
How hot does it get?
The heated glass shelves and canopy element run up to 200°F. Allow 15 to 20 minutes to reach operating temperature.
What colors are available?
Designer Black is standard. Warm Red, Gray Granite, White Granite, Navy Blue, Hunter Green, Antique Copper and Glossy Gray are factory options and are non-returnable.
What warranty does it have?
Hatco limited warranty: 18 months from shipment or product registration, whichever is later. Bulbs, glass components and fuses are not covered. Hatco also offers 24/7 parts and service assistance in the US and Canada.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | GR3SDS-27DCT |
| Series | Glo-Ray Heated Glass Merchandiser, GR3SDS-CT Curved Top |
| Configuration | Slant Dual ShelfCurved Top with Heated Canopy |
| Shipping Weight | 155 lb. |
| Width | 27.18 Inches |
| Depth | 27.76 Inches |
| Height | 26.32 Inches |
| Dimension Notes | Height includes 2.5 inch legs |
| Heated Shelf Space | 22.63 x 20.63 Inches per Level |
| Display Levels | 2 |
| Divider Rods | 10 |
| Voltage | 120 Volts |
| Wattage | 1340 Watts |
| Amps | 11.2 Amps |
| Plug Type | NEMA 5-15P |
| Phase | Single Phase |
| Cord | 6 ft. Cord and Plug, Server Side Lower Right Corner |
| Circuit Protection | Built-In GFCI, One per Circuit |
| Heat Sources | Blanket-Style Elements in Base and CanopyHeated Glass Shelves |
| Temperature Range | Up to 200°F |
| Display Lights | LED |
| Construction | Aluminum and Stainless SteelTempered Glass Side PanelsHardcoated Base |
| Standard Finish | Designer Black |
| Sign Holder | Built-In Front Sign Holder for 26.75 x 3 Inch Sign |
| Factory Options | Designer Colors: Warm Red, Gray Granite, White Granite, Navy Blue, Hunter Green, Antique CopperGlossy Gray |
| Accessories | 4 Inch Adjustable LegsAdditional Stainless Steel Divider Rods |
| Certifications | cULus, UL EPH Classified ANSI/NSF 4 |
| Country of Origin | Made in USA |
| Warranty | 18 Months Limited |
| Warranty Notes | From shipment or product registration, whichever is laterLight bulbs, glass components and fuses not covered24/7 parts and service assistance in US and Canada |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What Our Customers Say




