Hatco GR5A-48 Glo-Ray Curved Infrared Strip Heater, 48" W, 800 W, Standard Watt

Hatco GR5A-48 Glo-Ray Curved Infrared Strip Heater, 48" W, 800 W, Standard Watt

HatcoSKU: HAT-GR5A-48

Price:
Regular price$618.75
  • Warranty · Element 1-yr Parts and Labor Plus 1-yr Parts Only · Other Parts 18 Months

Secure checkout

Apple Pay Diners ClubDiscoverGoogle Pay Mastercard Shop Pay Visa

Talk to an equipment specialist

Mon–Sat 8 AM–5 PM ET

Questions about size, power, delivery or a quote for several units?

Call

Will it fit · Will it plug in

Outside (W × D × H)48" × 6" × 2"
Power120, 208 or 240V · 800 W · 6.7 A at 120V, 3.8 A at 208V, 3.3 A at 240V
Shipping weight18 lb.
ListedcULus, UL EPH Classified ANSI/NSF 4

Highlights

  • 48" W x 6" D x 2" H curved infrared strip heater
  • 800 W standard watt; 120, 208 or 240V single phase, chosen at order
  • Remote controls chosen at order: toggle, infinite or RMB control box
  • Angle brackets, 3 ft. conduit and 5 ft. power leads included
  • Clear anodized standard; Designer colors and Gloss finishes optional
  • cULus and UL EPH Classified to ANSI/NSF 4; made in USA

Specifications

ManufacturerHatco
Model NumberGR5A-48
SeriesGlo-Ray Curved Infrared Strip Heater, GR5A / GR5AH
TypeCurved Infrared Strip Heater, Standard Watt
Shipping Weight18 lb.
Width48"
Depth6"
Height2"
Overall Height3" with Angle Brackets
Voltage120, 208 or 240V
Voltage NoteVoltage is set at order; units are voltage specific
PhaseSingle Phase
Wattage800 Watts
Amps6.7 A at 120V, 3.8 A at 208V, 3.3 A at 240V
Leads5 ft. Power Leads in 3 ft. Conduit
Control TypeRemote, Chosen at Order, Remote Toggle Switches Max. 15 A, Remote Infinite Switch Max. 12.2 A, or RMB / RMB2 Control Box
Control BoxNot Included
HousingPatented Curved Aluminum, Clear Anodized Standard
Heating ElementTubular Metal-Sheathed Infrared
MountingAngle Brackets Standard, 1" Clearance to Overshelf
ClearanceCombustible surroundings: at least 11" above the surface, 1" from the back wall, 1" below the overshelf. Non-combustible: 10", 0" and 1"
Recommended Height11" to 13" above the food with combustible surroundings, 10" to 13" with non-combustible
FinishesDesigner: Warm Red, Black, Gray Granite, White Granite, Navy Blue, Hunter Green, Antique Copper, Gloss: Radiant Red, Glossy Gray, Bold Black, Gleaming Gold, Brilliant Blue
Factory OptionsNon-adjustable tubular stands, bottom mount or side mount, 10" to 16" clearance, Extended power leads 6-10 ft. or 11-15 ft.
AccessoriesSG5-48-BA or SG5-48-CA Curved Tempered Glass Sneeze Guard, 24" D x 4-1/8" H
CertificationscULus, UL EPH Classified ANSI/NSF 4
Country of OriginMade in USA
WarrantyElement 1 Year Parts and Labor Plus 1 Year Parts Only, Other Parts 18 Months
Warranty NotesMetal-sheathed food warmer element; 18 months from shipment or registration, whichever is later; bulbs, LED light tubes and glass not covered, 24/7 parts and service assistance in US and Canada

Resources & Documents

Specs

Manufacturer Hatco
Model Number GR5A-48
Series Glo-Ray Curved Infrared Strip Heater, GR5A / GR5AH
Type Curved Infrared Strip Heater, Standard Watt
Shipping Weight 18 lb.
Width 48 Inches
Depth 6 Inches
Height 2 Inches
Overall Height 3" with Angle Brackets
Voltage 120, 208 or 240 Volts
Voltage Note Voltage is set at order; units are voltage specific
Phase Single Phase
Wattage 800 Watts
Amps 6.7 A at 120V3.8 A at 208V3.3 A at 240V
Leads 5 ft. Power Leads in 3 ft. Conduit
Control Type Remote, Chosen at OrderRemote Toggle Switches Max. 15 A, Remote Infinite Switch Max. 12.2 A, or RMB / RMB2 Control Box
Control Box Not Included
Housing Patented Curved Aluminum, Clear Anodized Standard
Heating Element Tubular Metal-Sheathed Infrared
Mounting Angle Brackets Standard, 1" Clearance to Overshelf
Clearance Combustible surroundings: at least 11" above the surface, 1" from the back wall, 1" below the overshelf. Non-combustible: 10", 0" and 1"
Recommended Height 11" to 13" above the food with combustible surroundings, 10" to 13" with non-combustible
Finishes Designer: Warm Red, Black, Gray Granite, White Granite, Navy Blue, Hunter Green, Antique CopperGloss: Radiant Red, Glossy Gray, Bold Black, Gleaming Gold, Brilliant Blue
Factory Options Non-adjustable tubular stands, bottom mount or side mount, 10" to 16" clearanceExtended power leads 6-10 ft. or 11-15 ft.
Accessories SG5-48-BA or SG5-48-CA Curved Tempered Glass Sneeze Guard, 24" D x 4-1/8" H
Certifications cULus, UL EPH Classified ANSI/NSF 4
Country of Origin Made in USA
Warranty Element 1 Year Parts and Labor Plus 1 Year Parts OnlyOther Parts 18 Months
Warranty Notes Metal-sheathed food warmer element; 18 months from shipment or registration, whichever is later; bulbs, LED light tubes and glass not covered24/7 parts and service assistance in US and Canada

Certifications

cULus
UL EPH Classified ANSI/NSF 4
Call

Description

A slim curved strip heater that keeps buffet and serving-line food hot without crowding the look of the station.

Hatco GR5A-48 curved infrared strip heater in optional red finish, angled view

The Hatco GR5A-48 is a 48" standard watt Glo-Ray curved infrared strip heater for front-of-house buffet and serving lines. The patented curved aluminum housing is only 2" high and 6" deep, and its pre-focused infrared heat covers the holding area evenly. It is rated 800 watts and runs on 120, 208 or 240V single phase, chosen at order. Angle brackets, 3 ft. of conduit and 5 ft. power leads are included; controls are remote mounted and chosen when you order.

Will it fit · Will it hook up

Outside size
48" W x 6" D x 2" H; 3" overall height with the angle brackets
Power
Single phase, 800 W: 120V 6.7 A, 208V 3.8 A or 240V 3.3 A; voltage is set at order. 5 ft. power leads in 3 ft. of conduit
Mounting
Standard angle brackets mount it under a shelf with 1" clearance to the overshelf; tubular stands are optional
Controls
Remote mounted, chosen at order: remote toggle switches, a remote infinite switch, or an RMB or RMB2 control box (not included)
Clearance
Combustible surroundings: at least 11" above the surface, 1" from the back wall, 1" below the overshelf. Non-combustible: 10", 0" and 1"
Mounting height
Hatco recommends 11" to 13" above the food with combustible surroundings, 10" to 13" with non-combustible; heat pattern about 12" wide

Mount any remote control outside the heat zone, where the air stays at or below 104°F.

Slim curved housing

The patented curved aluminum housing is 2" high and 6" deep, so it fits tight spaces under shelves and sneeze guards.

Even infrared heat

A tubular metal-sheathed element and pre-focused heat pattern hold food at serving temperature longer without cooking it further.

Standard-watt output

800 watts over a 48" length; it can go over a steam table when the non-combustible clearances are met.

Your choice of controls

Order remote toggle switches, a remote infinite switch or an RMB or RMB2 control box to suit the station.

Colors to match the room

Clear anodized is standard. Seven Designer colors and five Gloss finishes are options, with end panels and brackets in the unit color.

Delivery and setup

  • Inspect the carton for damage before you sign, and note any damage on the delivery receipt.
  • Hatco requires a qualified electrician to install it to local electrical codes. Units are voltage specific, so check the label first.
  • Fasten the angle brackets to the underside of the shelf with fasteners suited to the shelf; Hatco does not supply them.
  • Keep the minimum clearances and do not hide it behind a decorative soffit; trapped heat can cause the unit to fail.
  • Install it where the room stays at 70°F or warmer, away from exhaust hoods, air ducts and exterior doors.
  • Clean it only when it is off and cool, with non-abrasive cleaners and cloths. Do not submerge it or soak it with water.

Questions buyers ask

Are controls included?

No control box comes with it. Choose remote toggle switches, a remote infinite switch or an RMB or RMB2 control box when you order.

What power does it need?

Single phase, wired in by an electrician: 6.7 A at 120V, 3.8 A at 208V or 3.3 A at 240V, 800 W. Voltage is chosen when you order.

How high should I mount it?

At least 11" above a combustible surface, or 10" above a non-combustible one. Hatco recommends 11" to 13" above the food with combustible surroundings, or 10" to 13" with non-combustible.

Can I add a sneeze guard?

Yes. Hatco sells curved tempered glass sneeze guards for the 48" size, 24" deep x 4-1/8" high: SG5-48-BA with black anodized hardware or SG5-48-CA with clear anodized hardware.

What colors can I get?

Clear anodized is standard. Designer colors are Warm Red, Black, Gray Granite, White Granite, Navy Blue, Hunter Green and Antique Copper; Gloss finishes are Radiant Red, Glossy Gray, Bold Black, Gleaming Gold and Brilliant Blue. Non-standard colors are non-returnable.

What is the warranty?

Hatco covers the metal-sheathed heating element for 1 year parts and labor plus 1 more year parts only. Other parts carry Hatco's 18-month limited warranty from shipment or registration, whichever is later; bulbs and glass are not covered.

800 W Std. WattPre-focused infrared heat.
48" x 6" x 2"Slim curved aluminum housing.
120, 208 or 240VSingle phase; set at order.
cULus, NSF 4UL EPH Classified; made in USA.

Specs

Manufacturer Hatco
Model Number GR5A-48
Series Glo-Ray Curved Infrared Strip Heater, GR5A / GR5AH
Type Curved Infrared Strip Heater, Standard Watt
Shipping Weight 18 lb.
Width 48 Inches
Depth 6 Inches
Height 2 Inches
Overall Height 3" with Angle Brackets
Voltage 120, 208 or 240 Volts
Voltage Note Voltage is set at order; units are voltage specific
Phase Single Phase
Wattage 800 Watts
Amps 6.7 A at 120V3.8 A at 208V3.3 A at 240V
Leads 5 ft. Power Leads in 3 ft. Conduit
Control Type Remote, Chosen at OrderRemote Toggle Switches Max. 15 A, Remote Infinite Switch Max. 12.2 A, or RMB / RMB2 Control Box
Control Box Not Included
Housing Patented Curved Aluminum, Clear Anodized Standard
Heating Element Tubular Metal-Sheathed Infrared
Mounting Angle Brackets Standard, 1" Clearance to Overshelf
Clearance Combustible surroundings: at least 11" above the surface, 1" from the back wall, 1" below the overshelf. Non-combustible: 10", 0" and 1"
Recommended Height 11" to 13" above the food with combustible surroundings, 10" to 13" with non-combustible
Finishes Designer: Warm Red, Black, Gray Granite, White Granite, Navy Blue, Hunter Green, Antique CopperGloss: Radiant Red, Glossy Gray, Bold Black, Gleaming Gold, Brilliant Blue
Factory Options Non-adjustable tubular stands, bottom mount or side mount, 10" to 16" clearanceExtended power leads 6-10 ft. or 11-15 ft.
Accessories SG5-48-BA or SG5-48-CA Curved Tempered Glass Sneeze Guard, 24" D x 4-1/8" H
Certifications cULus, UL EPH Classified ANSI/NSF 4
Country of Origin Made in USA
Warranty Element 1 Year Parts and Labor Plus 1 Year Parts OnlyOther Parts 18 Months
Warranty Notes Metal-sheathed food warmer element; 18 months from shipment or registration, whichever is later; bulbs, LED light tubes and glass not covered24/7 parts and service assistance in US and Canada

Certifications

cULus
UL EPH Classified ANSI/NSF 4

Payment & Security

Apple Pay Diners Club Discover Google Pay Mastercard Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

What Our Customers Say

Related Products

Recently viewed