Hatco GRA-66 Glo-Ray 66" Aluminum Infrared Strip Heater, Standard Watt, 1160 W, 120/208/240V
A 66-inch Glo-Ray strip heater that mounts over a pass-through or holding shelf and keeps plated food hot without drying it out.
The Hatco GRA-66 is a standard watt Glo-Ray aluminum strip heater, 66" W x 6" D x 2-1/2" H, rated 1160 watts, single phase. It is built for 120V, 208V or 240V, and the voltage is set when the unit is ordered. Pre-focused reflectors spread the heat from a metal sheathed element across the whole holding surface with no cold spots. A toggle switch on the chef's left side is standard, with 36" flexible metal conduit and 42" wire leads at the server's right.
Measure the shelf: the heater is 66" long and 6" deep, and the switch sits on the chef's left end.
Specially designed reflectors aim the heat across the entire holding surface with no cold spots, and the reflector does not blacken over time.
The continuous extruded aluminum housing does not sag, even on long runs, and insulation keeps heat aimed down at the food.
1160 watts across 66", with a recommended 8" to 11" mounting height above the food.
Wire guards under the element protect staff without blocking heat.
Clear anodized aluminum is standard; 12 Designer and Gloss finishes are optional at order. Non-standard colors cannot be returned.
Single phase at 120V, 208V or 240V, 1160 watts: 120V 9.7 A, 208V 5.6 A, 240V 4.8 A. It is hardwired as standard; pick the voltage when you order.
Hatco recommends 8" to 11" for standard watt units. Keep it at least 10" above combustible surfaces and 3" from a combustible wall.
Yes. An infinite control is available built in (max. 12.2 amps, remote installation recommended) or as a remote switch, ordered with the unit. The standard toggle switch is rated max. 15 amps.
Yes, on the 120V version: Hatco attaches a 6 ft. cord and NEMA 5-15P plug for units 72" or narrower that hang on chains or sit on C-leg or T-leg stands.
Hatco covers defects for 18 months from shipment or registration, whichever is later. The metal sheathed heating element has 1 year parts and labor plus 1 more year parts only. Register within 90 days of shipment.
Turn it off, unplug or switch off the breaker and let it cool. Wipe it daily with a water-dampened, non-abrasive cloth, use a non-abrasive cleaner on stubborn stains, then wipe dry. Do not steam clean, use a jet spray or soak it.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | GRA-66 |
| Series | Glo-Ray Aluminum Infrared Strip Heaters, GRA and GRAH |
| Type | Overhead Infrared Strip Warmer, Standard Watt |
| Shipping Weight | 16 lb. |
| Width | 66 Inches |
| Depth | 6 Inches |
| Height | 2.5 Inches |
| Voltage | 120, 208 or 240 Volts |
| Phase | 1 |
| Watts | 1160 Watts |
| Amp Ratings | 120V 9.7 A208V 5.6 A240V 4.8 A |
| Connection | Hardwired36" Flexible Metal Conduit with 42" Wire Leads, Server's Right |
| Optional Plug | NEMA 5-15P, 6 ft. Cord on 120V Models |
| Control Type | Toggle Switch, Chef's Left, Max. 15 AmpsOptional Infinite Control, Max. 12.2 Amps |
| Recommended Mounting Height | 8" to 11" Standard Watt |
| Clearances | Combustibles: 10" to Surface Below, 3" to Wall, 1" Below Overshelf |
| Mounting | Factory Assembled with Mounting Tabs |
| Housing | Continuous Extruded Aluminum, Clear Anodized Standard |
| Heating Element | Tubular Metal Sheathed, Pre-Focused Reflector |
| Guard | Protective Wire Guards Under Element |
| Factory Options | Designer Color or Gloss FinishIndicator LightExtended Power Leads 1 to 20 ft.Sneeze Guard 9.375" or 14", One or Two SidesNo ControlInfinite Control, Built-In or Remote, Max. 12.2 ARemote Box RMB |
| Size and Mounting Options | Adjustable Tubular Stands 10" to 14"Non-Adjustable Tubular Stands 10", 12", 14" or 16"C-Leg or T-Leg Stands6 ft. Cord and Plug Set on 120VS Hooks with Chains |
| Designer and Gloss Colors | Warm Red, Black, Gray Granite, White Granite, Navy Blue, Hunter Green, Antique Copper, Radiant Red, Glossy Gray, Bold Black, Gleaming Gold, Brilliant Blue |
| Accessories | Adjustable Angle Brackets 1" to 2" or 7"Chain Suspension |
| Certifications | cULus, NSF |
| Country of Origin | Made in the USA |
| Warranty | 18 Month Hatco Limited Warranty |
| Element Warranty | 1 Year Parts and Labor Plus 1 Additional Year Parts Only, Metal Sheathed Element |
| Support | 24/7 Parts and Service Assistance, U.S. and Canada |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
