Hatco GRA48120TCCS Glo-Ray 48" Aluminum Infrared Strip Heater, Standard Watt, 800 W, Toggle, Chains, Cord and Plug, 120V
A ready-to-hang 48-inch Glo-Ray strip heater that plugs into a standard 120V outlet and keeps food hot at the pass without drying it out.
Hatco item GRA48120TCCS is the GRA-48 standard watt Glo-Ray aluminum strip heater supplied with a built-in toggle switch, two S hooks, two 6" lengths of chain and an attached 6 ft. cord with a NEMA 5-15P plug. It is rated 800 watts at 120V, single phase, and draws 6.7 amps. The housing is 48" W x 6" D x 2-1/2" H. Pre-focused reflectors spread the heat from a metal sheathed element across the holding area with no cold spots.
Measure the shelf: the heater is 48" long and 6" deep, and the switch sits on the chef's left end.
Specially designed reflectors aim the heat across the entire holding surface with no cold spots, and the reflector does not blacken over time.
The continuous extruded aluminum housing does not sag, even on long runs, and insulation keeps heat aimed down at the food.
800 watts across 48", with a recommended 8" to 11" mounting height above the food.
Ships with two S hooks, two 6" chains and an attached 6 ft. cord with NEMA 5-15P plug for stationary chain mounting.
Hatco item GRA48120TCCS is a set configuration: 120V, built-in toggle switch, S hooks, chains and cord with plug.
A grounded 120V NEMA 5-15 receptacle. The heater draws 6.7 amps at 800 watts and comes with a 6 ft. cord and NEMA 5-15P plug attached.
Hatco recommends 8" to 11" for standard watt units. Keep it at least 10" above combustible surfaces and 3" from a combustible wall.
Yes, the toggle switch is built into the housing on the chef's left side and is rated max. 15 amps.
Hatco covers defects for 18 months from shipment or registration, whichever is later. The metal sheathed heating element has 1 year parts and labor plus 1 more year parts only. Register within 90 days of shipment.
Turn it off, unplug or switch off the breaker and let it cool. Wipe it daily with a water-dampened, non-abrasive cloth, use a non-abrasive cleaner on stubborn stains, then wipe dry. Do not steam clean, use a jet spray or soak it.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | GRA-48 |
| Hatco Item Number | GRA48120TCCS |
| Series | Glo-Ray Aluminum Infrared Strip Heaters, GRA and GRAH |
| Type | Overhead Infrared Strip Warmer, Standard Watt |
| Shipping Weight | 11 lb. |
| Width | 48 Inches |
| Depth | 6 Inches |
| Height | 2.5 Inches |
| Voltage | 120 Volts |
| Phase | 1 |
| Watts | 800 Watts |
| Amps | 6.7 Amps |
| Plug Type | NEMA 5-15P |
| Cord | 6 ft. Attached Cord and Plug |
| Control Type | Built-In Toggle Switch, Chef's Left, Max. 15 Amps |
| Recommended Mounting Height | 8" to 11" Standard Watt |
| Clearances | Combustibles: 10" to Surface Below, 3" to Wall, 1" Below Overshelf |
| Mounting | Two S Hooks and Two 6" Chains Included, Stationary |
| Housing | Continuous Extruded Aluminum, Clear Anodized Standard |
| Heating Element | Tubular Metal Sheathed, Pre-Focused Reflector |
| Guard | Protective Wire Guards Under Element |
| Accessories | Adjustable Angle Brackets 1" to 2" or 7"Chain Suspension |
| Certifications | cULus, NSF |
| Country of Origin | Made in the USA |
| Warranty | 18 Month Hatco Limited Warranty |
| Element Warranty | 1 Year Parts and Labor Plus 1 Additional Year Parts Only, Metal Sheathed Element |
| Support | 24/7 Parts and Service Assistance, U.S. and Canada |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
