Hatco GRAH-24D3 Glo-Ray 24" Dual High Watt Aluminum Infrared Strip Heater, 3" Spacer, 15" Deep, 1000 W, 120/208/240V

Hatco GRAH-24D3 Glo-Ray 24" Dual High Watt Aluminum Infrared Strip Heater, 3" Spacer, 15" Deep, 1000 W, 120/208/240V

HatcoSKU: HAT-GRAH-24D3

Voltages
  • Warranty · 18 Months Limited

Secure checkout

Apple Pay Diners ClubDiscoverGoogle Pay Mastercard Shop Pay Visa

Talk to an equipment specialist

Mon–Sat 8 AM–5 PM ET

Questions about size, power, delivery or a quote for several units?

Call

Will it fit · Will it plug in

Outside (W × D × H)24" × 15" × 2.5"
Power120, 208 or 240V · 1000 W
Shipping weight16 lb.
ListedcULus, NSF

Highlights

  • 24" W x 15" D x 2.5" H dual high watt Glo-Ray aluminum strip heater
  • 1000 W single phase: 8.3 A at 120V, 4.8 A at 208V, 4.2 A at 240V
  • Pre-focused heat pattern covers the entire holding surface with no cold spots
  • Two 6" heater sections with a 3" spacer for a deeper holding area
  • Built-in toggle switch control at the chef's left side
  • Extruded aluminum housing does not sag; reflector does not blacken
  • cULus and NSF; made in USA

Specifications

ManufacturerHatco
Model NumberGRAH-24D3
SeriesGlo-Ray Aluminum Dual Infrared Strip Heater, GRAH-D High Watt
Shipping Weight16 lb.
Width24"
Depth15"
Height2.5"
Spacer3" Spacer Between Two 6" Heater Sections
Voltage120, 208 or 240V
Wattage1000 Watts
Amps by Voltage120V: 8.3 A, 208V: 4.8 A, 240V: 4.2 A
PhaseSingle Phase
ConnectionHardwired, 3 ft. Conduit with Leads, Server's Right, Conduit Standard on 120V and 208V Models
ControlBuilt-In Toggle Switch Control, Chef's Left Side, Toggle Switch Rating Max. 15 A
Control NotesInfinite Switches Remote Only, Max. 12.2 A
ElementMetal-Sheathed Tubular Infrared Elements
Recommended Mounting Height14 to 18", High Watt Dual
ClearancesNot for Combustible Surroundings, Built-In Switches: 10" to Surface Below, Pass-Through Only, 1" Below Overshelf, Remote Switches: 8" to Surface Below, 3" to Wall, Flush to Overshelf
HousingExtruded Aluminum, Clear Anodized Finish Standard
MountingFour Stainless Steel Shelf Mounting Tabs
Factory OptionsDesigner Color or Gloss Finish, Indicator Light, Remote Only, Extended Leads, Sneeze Guards 9.375 or 14", Remote Infinite or Toggle Switches, Remote Box RMB, Tubular Stands
AccessoriesAdjustable Angle Brackets 1 to 2", Chain Suspension
CertificationscULus, NSF
Country of OriginMade in USA
Warranty18 Months Limited
Warranty DetailsMetal-sheathed element: 1 year parts and labor plus 1 more year parts-only, Other parts: 18 months from shipment or registration, whichever is later, Register within 90 days of shipment, 24/7 parts and service help in US and Canada

Resources & Documents

Specs

Manufacturer Hatco
Model Number GRAH-24D3
Series Glo-Ray Aluminum Dual Infrared Strip Heater, GRAH-D High Watt
Shipping Weight 16 lb.
Width 24 Inches
Depth 15 Inches
Height 2.5 Inches
Spacer 3 Inch Spacer Between Two 6 Inch Heater Sections
Voltage 120, 208 or 240 Volts
Wattage 1000 Watts
Amps by Voltage 120V: 8.3 Amps208V: 4.8 Amps240V: 4.2 Amps
Phase Single Phase
Connection Hardwired, 3 ft. Conduit with Leads, Server's RightConduit Standard on 120V and 208V Models
Control Built-In Toggle Switch Control, Chef's Left SideToggle Switch Rating Max. 15 Amps
Control Notes Infinite Switches Remote Only, Max. 12.2 Amps
Element Metal-Sheathed Tubular Infrared Elements
Recommended Mounting Height 14 to 18 Inches, High Watt Dual
Clearances Not for Combustible SurroundingsBuilt-In Switches: 10 Inches to Surface Below, Pass-Through Only, 1 Inch Below OvershelfRemote Switches: 8 Inches to Surface Below, 3 Inches to Wall, Flush to Overshelf
Housing Extruded Aluminum, Clear Anodized Finish Standard
Mounting Four Stainless Steel Shelf Mounting Tabs
Factory Options Designer Color or Gloss FinishIndicator Light, Remote OnlyExtended LeadsSneeze Guards 9.375 or 14 InchRemote Infinite or Toggle SwitchesRemote Box RMBTubular Stands
Accessories Adjustable Angle Brackets 1 to 2 InchChain Suspension
Certifications cULus, NSF
Country of Origin Made in USA
Warranty 18 Months Limited
Warranty Details Metal-sheathed element: 1 year parts and labor plus 1 more year parts-onlyOther parts: 18 months from shipment or registration, whichever is laterRegister within 90 days of shipment24/7 parts and service help in US and Canada

Certifications

cULus
NSF
Call

Description

Two high watt infrared heaters in one 24" housing keep a deep pass-through or a row of plated food hot and ready to serve.

Hatco GRAH-24D3 dual aluminum infrared strip heater, underside view with toggle switch end

The Hatco GRAH-24D3 is a Glo-Ray dual high watt aluminum infrared strip heater, 24" wide and 15" deep. Two 6" heater sections sit side by side with a 3" spacer for a deeper holding area, and the pre-focused heat pattern covers the whole surface with no cold spots. It draws 1000 watts on 120V, 208V or 240V single phase, chosen at order, with toggle switch control at the chef's left side.

Will it fit · Will it hook up

Outside size
24" W x 15" D x 2.5" H
Where it works
Hatco recommends dual units for a 20" to 24" deep pass-through
Power
Single phase, 1000 W: 8.3 A at 120V, 4.8 A at 208V, 4.2 A at 240V; set the voltage at order
Hookup
3 ft. conduit with leads at the server's right, hardwired by an electrician; Hatco lists the conduit as standard on 120V and 208V models
Mounting height
Hatco recommends 14" to 18" above the food for high watt dual units
Clearance
Not for combustible surroundings. Built-in switches: 10" to the surface below, pass-through only, 1" below an overshelf

The size number is the overall length: the GRAH-24D3 is 24" wide, so measure the shelf or pass-through for that.

No cold spots

A pre-focused heat pattern covers the entire holding surface, so food holds at serving temperature without drying out or cooking further.

Deeper holding area

A 3" spacer joins two 6" heater sections for a 15" deep unit that covers a deeper pass-through.

High watt output

1000 watts from metal-sheathed tubular elements for mounting 14" to 18" above the food.

Housing that stays straight

The continuous extruded aluminum housing does not sag across the full 24" width, and the reflector does not blacken, so the heat pattern stays even.

Simple toggle control

An on/off toggle switch, rated 15 amps maximum, sits at the chef's left side. Remote switches and control boxes are factory options.

Guarded and insulated

Reinforced wire guards protect the element without blocking heat, and insulation minimizes heat loss.

Delivery and setup

  • Inspect the carton for damage before you sign, and note any damage on the delivery receipt.
  • Approximate shipping weight is 16 lb, including packaging; a remote control box is not included.
  • Have a qualified electrician hardwire it to a properly grounded circuit that matches the voltage on the specification label.
  • Install remote control boxes and switches outside the heat zone, or heat will damage them.
  • Dual units cannot be installed in combustible surroundings, and Hatco does not allow a decorative soffit around a pass-through heater.
  • Clean daily once cool: wipe with a damp, non-abrasive cloth and dry. Do not submerge, steam clean or spray it.

Questions buyers ask

How high should I mount it?

Hatco recommends 14" to 18" above the food for high watt dual units. With built-in switches, keep at least 10" to the surface below; with remote switches, 8".

What power does it need?

Single phase at 120, 208 or 240V, chosen at order. At 1000 watts it draws 8.3 A at 120V, 4.8 A at 208V, 4.2 A at 240V. It is hardwired through conduit with leads.

Single or dual strip heater?

Hatco recommends a single unit for a 12" to 16" deep pass-through and a dual unit for a 20" to 24" deep pass-through.

Can I order colors or sneeze guards?

Yes, at time of purchase only: Designer colors or gloss finishes, sneeze guards, an indicator light, remote switches and stands. Non-standard colors are non-returnable.

What certifications does it have?

The Hatco spec sheet shows cULus and NSF marks, and Made in USA.

What is the warranty?

Hatco covers the metal-sheathed element for 1 year parts and labor plus 1 more year parts-only, and other parts for 18 months from shipment or registration, whichever is later. Register within 90 days of shipment.

1000 W High WattPre-focused infrared heat.
24" x 15" x 2.5"Dual, 3" spacer.
120, 208 or 240VSingle phase, set at order.
cULus, NSFMade in USA.

Specs

Manufacturer Hatco
Model Number GRAH-24D3
Series Glo-Ray Aluminum Dual Infrared Strip Heater, GRAH-D High Watt
Shipping Weight 16 lb.
Width 24 Inches
Depth 15 Inches
Height 2.5 Inches
Spacer 3 Inch Spacer Between Two 6 Inch Heater Sections
Voltage 120, 208 or 240 Volts
Wattage 1000 Watts
Amps by Voltage 120V: 8.3 Amps208V: 4.8 Amps240V: 4.2 Amps
Phase Single Phase
Connection Hardwired, 3 ft. Conduit with Leads, Server's RightConduit Standard on 120V and 208V Models
Control Built-In Toggle Switch Control, Chef's Left SideToggle Switch Rating Max. 15 Amps
Control Notes Infinite Switches Remote Only, Max. 12.2 Amps
Element Metal-Sheathed Tubular Infrared Elements
Recommended Mounting Height 14 to 18 Inches, High Watt Dual
Clearances Not for Combustible SurroundingsBuilt-In Switches: 10 Inches to Surface Below, Pass-Through Only, 1 Inch Below OvershelfRemote Switches: 8 Inches to Surface Below, 3 Inches to Wall, Flush to Overshelf
Housing Extruded Aluminum, Clear Anodized Finish Standard
Mounting Four Stainless Steel Shelf Mounting Tabs
Factory Options Designer Color or Gloss FinishIndicator Light, Remote OnlyExtended LeadsSneeze Guards 9.375 or 14 InchRemote Infinite or Toggle SwitchesRemote Box RMBTubular Stands
Accessories Adjustable Angle Brackets 1 to 2 InchChain Suspension
Certifications cULus, NSF
Country of Origin Made in USA
Warranty 18 Months Limited
Warranty Details Metal-sheathed element: 1 year parts and labor plus 1 more year parts-onlyOther parts: 18 months from shipment or registration, whichever is laterRegister within 90 days of shipment24/7 parts and service help in US and Canada

Certifications

cULus
NSF

Payment & Security

Apple Pay Diners Club Discover Google Pay Mastercard Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

What Our Customers Say

Related Products

Recently viewed