Hatco GRAH-24D3-120-QS Glo-Ray 24" Dual High Watt Aluminum Infrared Strip Heater, 3" Spacer, 15" Deep, 1000 W, Toggle Switch, 120V, Quick-Ship
Two high watt infrared heaters in one 24" housing keep a deep pass-through or a row of plated food hot and ready to serve.
The Hatco GRAH-24D3-120-QS is a Glo-Ray dual high watt aluminum infrared strip heater, 24" wide and 15" deep. Two 6" heater sections sit side by side with a 3" spacer for a deeper holding area, and the pre-focused heat pattern covers the whole surface with no cold spots. This Hatco Quick-Ship stock item (GRAH24D120V) is wired for 120V single phase, 1000 watts, with a built-in toggle switch and conduit with leads.
The size number is the overall length: the GRAH-24D3-120-QS is 24" wide, so measure the shelf or pass-through for that.
A pre-focused heat pattern covers the entire holding surface, so food holds at serving temperature without drying out or cooking further.
A 3" spacer joins two 6" heater sections for a 15" deep unit that covers a deeper pass-through.
1000 watts from metal-sheathed tubular elements for mounting 14" to 18" above the food.
The continuous extruded aluminum housing does not sag across the full 24" width, and the reflector does not blacken, so the heat pattern stays even.
An on/off toggle switch, rated 15 amps maximum, sits at the chef's left side.
Reinforced wire guards protect the element without blocking heat, and insulation minimizes heat loss.
Hatco recommends 14" to 18" above the food for high watt dual units. With built-in switches, keep at least 10" to the surface below; with remote switches, 8".
120V single phase. It draws 1000 watts, 8.3 amps, and is hardwired through conduit with leads; there is no plug.
Hatco recommends a single unit for a 12" to 16" deep pass-through and a dual unit for a 20" to 24" deep pass-through.
The Hatco spec sheet shows cULus and NSF marks, and Made in USA.
Hatco covers the metal-sheathed element for 1 year parts and labor plus 1 more year parts-only, and other parts for 18 months from shipment or registration, whichever is later. Register within 90 days of shipment.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | GRAH-24D3-120-QS |
| Hatco Item Number | GRAH24D120V |
| Program | Hatco Quick-Ship Stock Item |
| Series | Glo-Ray Aluminum Dual Infrared Strip Heater, GRAH-D High Watt |
| Shipping Weight | 16 lb. |
| Width | 24 Inches |
| Depth | 15 Inches |
| Height | 2.5 Inches |
| Spacer | 3 Inch Spacer Between Two 6 Inch Heater Sections |
| Voltage | 120 Volts |
| Wattage | 1000 Watts |
| Amps | 8.3 Amps |
| Phase | Single Phase |
| Connection | Hardwired, 3 ft. Conduit with Leads, Server's Right |
| Control | Built-In Toggle Switch Control, Chef's Left SideToggle Switch Rating Max. 15 Amps |
| Control Notes | Infinite Switches Remote Only, Max. 12.2 Amps |
| Element | Metal-Sheathed Tubular Infrared Elements |
| Recommended Mounting Height | 14 to 18 Inches, High Watt Dual |
| Clearances | Not for Combustible SurroundingsBuilt-In Switches: 10 Inches to Surface Below, Pass-Through Only, 1 Inch Below OvershelfRemote Switches: 8 Inches to Surface Below, 3 Inches to Wall, Flush to Overshelf |
| Housing | Extruded Aluminum, Clear Anodized Finish Standard |
| Mounting | Four Stainless Steel Shelf Mounting Tabs |
| Accessories | QSANGLE-D Adjustable Angle Brackets, 2 Pairs |
| Certifications | cULus, NSF |
| Country of Origin | Made in USA |
| Warranty | 18 Months Limited |
| Warranty Details | Metal-sheathed element: 1 year parts and labor plus 1 more year parts-onlyOther parts: 18 months from shipment or registration, whichever is laterRegister within 90 days of shipment24/7 parts and service help in US and Canada |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
