Hatco GRAH-54D3 Glo-Ray 54" Dual High Watt Aluminum Infrared Strip Heater, 3" Spacer, 15" Deep, 2500 W, 120/208/240V
Two high watt infrared heaters in one 54" housing keep a deep pass-through or a row of plated food hot and ready to serve.
The Hatco GRAH-54D3 is a Glo-Ray dual high watt aluminum infrared strip heater, 54" wide and 15" deep. Two 6" heater sections sit side by side with a 3" spacer for a deeper holding area, and the pre-focused heat pattern covers the whole surface with no cold spots. It draws 2500 watts on 120V, 208V or 240V single phase, chosen at order, with toggle switch control at the chef's left side.
The size number is the overall length: the GRAH-54D3 is 54" wide, so measure the shelf or pass-through for that.
A pre-focused heat pattern covers the entire holding surface, so food holds at serving temperature without drying out or cooking further.
A 3" spacer joins two 6" heater sections for a 15" deep unit that covers a deeper pass-through.
2500 watts from metal-sheathed tubular elements for mounting 14" to 18" above the food.
The continuous extruded aluminum housing does not sag across the full 54" width, and the reflector does not blacken, so the heat pattern stays even.
Toggle switch control at the chef's left side is standard. Hatco toggle switches are rated 15 amps maximum, and 120V dual models may need additional switches.
Reinforced wire guards protect the element without blocking heat, and insulation minimizes heat loss.
Hatco recommends 14" to 18" above the food for high watt dual units. With built-in switches, keep at least 10" to the surface below; with remote switches, 8".
Single phase at 120, 208 or 240V, chosen at order. At 2500 watts it draws 20.8 A at 120V, 12.0 A at 208V, 10.4 A at 240V. It is hardwired through conduit with leads.
Hatco notes that 120V dual models may need additional switches, depending on the unit and wattage. Confirm the 120V control setup with Hatco when you order.
Hatco recommends a single unit for a 12" to 16" deep pass-through and a dual unit for a 20" to 24" deep pass-through.
Yes, at time of purchase only: Designer colors or gloss finishes, sneeze guards, an indicator light, remote switches and stands. Non-standard colors are non-returnable.
The Hatco spec sheet shows cULus and NSF marks, and Made in USA.
Hatco covers the metal-sheathed element for 1 year parts and labor plus 1 more year parts-only, and other parts for 18 months from shipment or registration, whichever is later. Register within 90 days of shipment.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | GRAH-54D3 |
| Series | Glo-Ray Aluminum Dual Infrared Strip Heater, GRAH-D High Watt |
| Shipping Weight | 30 lb. |
| Width | 54 Inches |
| Depth | 15 Inches |
| Height | 2.5 Inches |
| Spacer | 3 Inch Spacer Between Two 6 Inch Heater Sections |
| Voltage | 120, 208 or 240 Volts |
| Wattage | 2500 Watts |
| Amps by Voltage | 120V: 20.8 Amps208V: 12.0 Amps240V: 10.4 Amps |
| Phase | Single Phase |
| Connection | Hardwired, 3 ft. Conduit with Leads, Server's RightConduit Standard on 120V and 208V Models |
| Control | Built-In Toggle Switch Control, Chef's Left SideToggle Switch Rating Max. 15 Amps |
| Control Notes | 100V and 120V Models May Require Additional SwitchesInfinite Switches Remote Only, Max. 12.2 Amps |
| Element | Metal-Sheathed Tubular Infrared Elements |
| Recommended Mounting Height | 14 to 18 Inches, High Watt Dual |
| Clearances | Not for Combustible SurroundingsBuilt-In Switches: 10 Inches to Surface Below, Pass-Through Only, 1 Inch Below OvershelfRemote Switches: 8 Inches to Surface Below, 3 Inches to Wall, Flush to Overshelf |
| Housing | Extruded Aluminum, Clear Anodized Finish Standard |
| Mounting | Four Stainless Steel Shelf Mounting Tabs |
| Factory Options | Designer Color or Gloss FinishIndicator Light, Remote OnlyExtended LeadsSneeze Guards 9.375 or 14 InchRemote Infinite or Toggle SwitchesRemote Box RMBTubular Stands |
| Accessories | Adjustable Angle Brackets 1 to 2 InchChain Suspension |
| Certifications | cULus, NSF |
| Country of Origin | Made in USA |
| Warranty | 18 Months Limited |
| Warranty Details | Metal-sheathed element: 1 year parts and labor plus 1 more year parts-onlyOther parts: 18 months from shipment or registration, whichever is laterRegister within 90 days of shipment24/7 parts and service help in US and Canada |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
