Hatco GRAH-72D Glo-Ray 72" Dual High Watt Infrared Strip Heater, 6" Spacer, 3,450W, 120/208/240V
Two 72-inch high watt heat strips side by side, sized to keep a deep pass or plating area hot.
The Hatco GRAH-72D is a 72" Glo-Ray dual strip heater: two high watt heater sections mounted side by side with a 6" spacer between them, for a deeper holding area. This listing is the 6" spacer version, 18" deep overall (the 3" spacer is standard; the 6" spacer is the deeper option). It is rated 3,450 W in total and is built for 120, 208 or 240V single phase, set at order. Toggle switches on the chef's left side are standard, and the unit is hardwired.
Measure the pass: the unit is 72" long and 18" deep, and it cannot be installed in combustible surroundings.
Two heater sections side by side with a 6" spacer make the unit 18" deep, for a deeper holding area than one single strip.
Two tubular metal-sheathed elements and pre-focused reflectors spread 3,450 W across the holding surface with no cold spots.
Continuous extruded aluminum housings span the full 72" without sagging, and the reflectors do not blacken.
Heavy-duty insulation minimizes heat loss, and reinforced wire guards protect the elements.
Order remote toggle or infinite switches in a Hatco RMB box, or the no-control option for an RMB2 box that runs several warmers.
It is single phase and built for 120, 208 or 240V, set at order. At 3,450 W it draws 28.8 A at 120V, 16.6 A at 208V or 14.4 A at 240V.
The spacer sets the gap between the two heater sections. The 3" spacer is standard and gives a 15" deep unit; the 6" spacer gives 18". This listing has the 6" spacer.
Hatco recommends 14" to 18" from the elements to the food for high watt dual models.
No. Hatco says dual strip heaters cannot be installed in combustible surroundings. With remote switches it can be flush to a non-combustible overshelf.
No. Dual units are hardwired, and Hatco does not offer C-leg or T-leg stands for dual strip heaters.
Hatco repairs or replaces defective parts for 18 months from shipment or registration, whichever is later. The metal-sheathed heating element has 1 year parts and labor plus a second year parts only. Register within 90 days.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | GRAH-72D |
| Store SKU Model | GRAH-72D6 = Hatco GRAH-72D with 6 Inch Spacer |
| Series | Glo-Ray Dual Aluminum Infrared Strip Heater GRA-D/GRAH-D |
| Wattage Class | High Watt |
| Shipping Weight | 36 lb. |
| Shipping Weight Note | Includes PackagingRemote Control Box Not Included |
| Width | 72 Inches |
| Depth | 18 Inches |
| Height | 2.5 Inches |
| Spacer | 6 Inch Spacer Between Two 6 Inch Heater Sections3 Inch Spacer 15 Inches Deep, Standard6 Inch Spacer 18 Inches Deep |
| Wattage | 3,450 Watts |
| Voltage | 120, 208 or 240 Volts |
| Phase | Single Phase |
| Amps by Voltage | 120V 28.8 A208V 16.6 A240V 14.4 A |
| Voltage Note | Voltage Specific, Set at Order |
| Connection | HardwiredLeads on the Server's Right3 ft. Conduit Standard on 120V and 208V Models |
| Control Type | Toggle Switch, Chef's Left Side Standard |
| Switch Ratings | Toggle Switch Max. 15 AInfinite Switch Max. 12.2 A, Remote Only |
| Control Options | Remote Infinite or Remote Toggle SwitchesRemote Control Enclosure RMBIndicator Light, Remote OnlyNo Control for RMB2 |
| Element | Two Tubular Metal-Sheathed Infrared ElementsPre-Focused Heat PatternReflector Does Not Blacken |
| 120V Note | 120V Models May Need Additional Switches, Consult Hatco |
| Element Height | 14 to 18 Inches Above the Food, High Watt |
| Surroundings | Non-Combustible Surroundings Only |
| Clearances | Built-In Switches 10 Inches to Surface Below, Pass-Through Only, 1 Inch Below OvershelfRemote Switches 8 Inches to Surface, 3 Inches to Wall, Flush to Overshelf |
| Pass-Through Depth | Dual Unit for a 20 to 24 Inch Deep Pass-Through |
| Exterior | Continuous Extruded Aluminum Housing, Clear Anodized Standard |
| Interior | Heavy-Duty InsulationReinforced Wire Guards |
| Mounting | Four Shelf Mounting Tabs |
| Designer Colors | Warm Red, Black, Gray Granite, White Granite, Navy Blue, Hunter Green, Antique CopperGloss Finishes Radiant Red, Glossy Gray, Bold Black, Gleaming Gold, Brilliant BlueAnti-Microbial PaintNon-Standard Colors Non-Returnable |
| Mounting Options | Adjustable Tubular Stands 10 to 14 Inch, Not in Designer ColorsNon-Adjustable Tubular Stands 10, 12, 14 or 16 Inch |
| Other Options | Sneeze Guards 9-3/8 or 14 Inch, One or Two SidesExtended Leads up to 20 ft. |
| Accessories | Adjustable Angle Brackets for Dual Models 1 to 2 InchChain Suspension |
| Certifications | cULus, NSF |
| Made In | USA |
| Warranty | 18 Months Limited |
| Warranty Details | Repair or replacement of defective parts for 18 months from shipment or registration, whichever is laterRegister within 90 days of shipment |
| Element Warranty | Metal-Sheathed Food Warmer Element 1 Year Parts and Labor Plus 1 Additional Year Parts Only |
| Service | 24/7 Parts and Service Assistance, US and Canada |
| Not Covered | Glass Components and Fuses |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
