Hatco GRAH-84 Glo-Ray 84" High Watt Aluminum Infrared Strip Heater, 2,050W, 120/208/240V
An 84-inch high watt overhead heat strip that keeps plated food hot at the pass until it goes out.
The Hatco GRAH-84 is an 84" Glo-Ray high watt strip heater that hangs over a pass-through, heated shelf or serving line. A tubular metal-sheathed element and a pre-focused reflector spread 2,050 W of infrared heat across the whole holding area, so food stays hot without drying out. It is built for 120, 208 or 240V single phase, chosen at order: 120V 17.1 A, 208V 9.9 A or 240V 8.5 A. A toggle switch on the chef's left side is standard, and the unit is hardwired through a 36" flexible metal conduit.
Measure the span: the housing is 84" long, and keep at least 3" between two strip heaters mounted side by side.
The tubular metal-sheathed element and pre-focused reflector cover the whole holding surface with 2,050 W, with no cold spots.
GRAH models are Hatco's high watt version, mounted 11" to 14" above the food; standard watt GRA models mount at 8" to 11".
A continuous extruded aluminum housing spans the full 84" without sagging, and the reflector does not blacken.
Insulation minimizes heat loss, and a protective wire guard sits under the element.
Designer colors, sneeze guards, infinite or remote controls, stands and longer leads are factory options at the time of purchase.
It is single phase and built for 120, 208 or 240V, set at order. At 2,050 W it draws 17.1 A at 120V, 9.9 A at 208V or 8.5 A at 240V.
No. Hatco lists cord and plug sets only on 120V units 72" wide or less, so the 84" model is hardwired.
Hatco recommends 11" to 14" from the element to the food for high watt models, and at least 13-1/2" above combustible surfaces.
Yes, at the time of purchase. Hatco offers built-in or remote infinite controls (12.2 A max.) and remote control enclosures (RMB). Mount any remote box outside the heat zone.
Clear anodized aluminum is standard. Designer colors and gloss finishes are factory options at the time of purchase; non-standard colors are non-returnable.
Hatco repairs or replaces defective parts for 18 months from shipment or registration, whichever is later. The metal-sheathed heating element has 1 year parts and labor plus a second year parts only. Register within 90 days.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | GRAH-84 |
| Series | Glo-Ray Aluminum Infrared Strip Heater GRA/GRAH |
| Wattage Class | High Watt |
| Shipping Weight | 19 lb. |
| Shipping Weight Note | Includes PackagingRemote Control Box Not Included |
| Width | 84 Inches |
| Depth | 6 Inches |
| Height | 2.5 Inches |
| Wattage | 2,050 Watts |
| Voltage | 120, 208 or 240 Volts |
| Phase | Single Phase |
| Amps by Voltage | 120V 17.1 A208V 9.9 A240V 8.5 A |
| Voltage Note | Voltage Specific, Set at Order |
| Connection | Hardwired36 Inch Flexible Metal Conduit with 42 Inch Wire Leads, Server's Right |
| Control Type | Built-In Toggle Switch, Chef's Left Side Standard |
| Switch Ratings | Toggle Switch Max. 15 AInfinite Switch Max. 12.2 A |
| Control Options | Built-In or Remote Infinite ControlRemote Control Enclosure RMBIndicator LightNo Control |
| Element | Tubular Metal-Sheathed Infrared ElementPre-Focused Heat PatternReflector Does Not Blacken |
| 120V Note | 120V Models Use Tandem End-to-End Elements and Additional Switches |
| Element Height | 11 to 14 Inches Above the Food, High Watt |
| Clearance to Combustibles | 13-1/2 Inches Above Combustible Surfaces3 Inches From a Combustible Wall1 Inch Below an Overshelf |
| Pass-Through Depth | Single Unit for a 12 to 16 Inch Deep Pass-Through |
| Exterior | Continuous Extruded Aluminum Housing, Clear Anodized Standard |
| Interior | Insulated HousingProtective Wire Guard Under the Element |
| Mounting | Factory Assembled with Mounting Tabs |
| Designer Colors | Warm Red, Black, Gray Granite, White Granite, Navy Blue, Hunter Green, Antique CopperGloss Finishes Radiant Red, Glossy Gray, Bold Black, Gleaming Gold, Brilliant BlueAnti-Microbial PaintNon-Standard Colors Non-Returnable |
| Mounting Options | Adjustable Tubular Stands 10 to 14 InchNon-Adjustable Tubular Stands 10, 12, 14 or 16 Inch |
| Other Options | Sneeze Guards 9-3/8 or 14 Inch, One or Two SidesExtended Leads up to 20 ft. |
| Accessories | Adjustable Angle Brackets 1 to 2 InchChain Suspension |
| Certifications | cULus, NSF |
| Made In | USA |
| Warranty | 18 Months Limited |
| Warranty Details | Repair or replacement of defective parts for 18 months from shipment or registration, whichever is laterRegister within 90 days of shipment |
| Element Warranty | Metal-Sheathed Food Warmer Element 1 Year Parts and Labor Plus 1 Additional Year Parts Only |
| Service | 24/7 Parts and Service Assistance, US and Canada |
| Not Covered | Glass Components and Fuses |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
