Hatco GRAHL-120 Glo-Ray 120" High Watt Infrared Strip Heater with Lights, 3,400W, 120, 120/208 or 120/240V
A 120-inch high watt heat strip with built-in display lights that keeps plated food hot and well lit at the pass.
The Hatco GRAHL-120 is a 120" Glo-Ray high watt strip heater with lights for a pass-through, heated shelf or serving line. A tubular metal-sheathed element and pre-focused reflector spread 3,400 W of infrared heat over the food, while 10 shatter-resistant coated incandescent bulbs light it for staff and guests. It is built for 120, 120/208 or 120/240V single phase, set at order; the dual-voltage versions run the lights on 120V and the heat on 208V or 240V. A toggle switch on the chef's left side is standard, and the unit is hardwired through a 36" flexible metal conduit.
Measure the span: the housing is 120" long and 9" deep, and keep at least 3" between two strip heaters mounted side by side.
10 shatter-resistant coated incandescent bulbs light the food while protecting it from bulb breakage.
The tubular metal-sheathed element and pre-focused reflector cover the holding surface with 3,400 W, with no cold spots.
A continuous extruded aluminum housing spans the full 120" without sagging, and the reflector does not blacken.
GRAHL models are Hatco's high watt version, for a pass where the element hangs 11" to 14" above the food.
At 120" the heater uses tandem end-to-end elements that may be controlled separately, so you can heat only part of the line.
It is single phase and built for 120, 120/208 or 120/240V, set at order. At 3,400 W it draws 28.3 A at 120V, 18.5 A at 120/208V or 16.7 A at 120/240V.
Those versions have two circuits: 120V for the lights and 208V or 240V for the heat. The wiring diagram with the unit shows the hookup.
10 coated incandescent bulbs; Hatco's standard is one per foot of length. Hatco offers halogen bulbs on 120V units and extra lamps, up to two per foot less one, at the time of purchase.
Hatco recommends 11" to 14" from the element to the food for high watt models, and at least 13-1/2" above combustible surfaces.
Turn it off, let it cool, then wipe the metal surfaces with a damp, non-abrasive cloth and dry it. Do not submerge it, steam clean it or use a lot of water.
Hatco repairs or replaces defective parts for 18 months from shipment or registration, whichever is later. The metal-sheathed heating element has 1 year parts and labor plus a second year parts only. Register within 90 days.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | GRAHL-120 |
| Series | Glo-Ray Aluminum Infrared Strip Heater with Lights GRAL/GRAHL |
| Wattage Class | High Watt |
| Shipping Weight | 40 lb. |
| Shipping Weight Note | Includes PackagingRemote Control Box Not Included |
| Width | 120 Inches |
| Depth | 9 Inches |
| Height | 2.5 Inches |
| Wattage | 3,400 Watts |
| Voltage | 120, 120/208 or 120/240 Volts |
| Phase | Single Phase, 3-Wire |
| Amps by Voltage | 120V 28.3 A120/208V 18.5 A120/240V 16.7 A |
| Voltage Note | Voltage Specific, Set at Order120/208V and 120/240V Units Run the Lights on 120V and the Heat on 208V or 240V |
| Connection | Hardwired36 Inch Flexible Metal Conduit with 42 Inch Wire Leads, Server's Right |
| Breaker Note | If the Heat Needs a Breaker Over 20 A, the Lights Need Their Own Breaker of 20 A or Less |
| Control Type | Built-In Toggle Switch, Chef's Left Side, Light Side |
| Switch Ratings | Toggle Switch Max. 15 AInfinite Switch Max. 12.2 A |
| Control Options | Built-In or Remote Infinite ControlRemote Toggle SwitchesRemote Control Enclosure RMBIndicator Light |
| Element | Tubular Metal-Sheathed Infrared ElementPre-Focused Heat PatternReflector Does Not Blacken |
| Tandem Elements | Contains Tandem End-to-End Elements That May Be Individually Controlled120V Models Need Additional Switches |
| Display Lights | 10 Shatter-Resistant Coated Incandescent Bulbs, 1 per Foot |
| Light Options | Halogen Bulb, 120V OnlyExtra Lamps up to Two per Foot Less OneBright Annealed ReflectorChef LED Bulb Accessory, Pass-Through Only |
| Element Height | 11 to 14 Inches Above the Food, High Watt |
| Clearance to Combustibles | 13-1/2 Inches Above Combustible Surfaces3 Inches From a Combustible Wall1 Inch Below an Overshelf |
| Pass-Through Depth | Single Unit for a 12 to 16 Inch Deep Pass-Through |
| Exterior | Continuous Extruded Aluminum Housing, Clear Anodized Standard |
| Interior | Insulated HousingReinforced Wire Guard |
| Mounting | Four Stainless Steel Shelf Mounting Tabs |
| Designer Colors | Warm Red, Black, Gray Granite, White Granite, Navy Blue, Hunter Green, Antique CopperGloss Finishes Radiant Red, Glossy Gray, Bold Black, Gleaming Gold, Brilliant BlueAnti-Microbial PaintNon-Standard Colors Non-Returnable |
| Mounting Options | Adjustable Tubular Stands 10 to 14 Inch, Aluminum Finish OnlyNon-Adjustable Tubular Stands 10, 12, 14 or 16 Inch |
| Other Options | Sneeze Guards 9-3/8 or 14 Inch, One or Two SidesExtended Leads up to 20 ft. |
| Accessories | Adjustable Angle Brackets 1 to 2 InchChain Suspension |
| Certifications | cULus, NSF |
| Made In | USA |
| Warranty | 18 Months Limited |
| Warranty Details | Repair or replacement of defective parts for 18 months from shipment or registration, whichever is laterRegister within 90 days of shipment |
| Element Warranty | Metal-Sheathed Food Warmer Element 1 Year Parts and Labor Plus 1 Additional Year Parts Only |
| Not Covered | Light Bulbs, Glass Components and Fuses |
| Service | 24/7 Parts and Service Assistance, US and Canada |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
