Hatco GRAHL-144D Glo-Ray 144" Dual High Watt Infrared Strip Heater with Lights, 3" Spacer, 7,620W, 120/208 or 120/240V
Description
Two 144-inch high watt heat strips with display lights, side by side, for a deep and well-lit pass.
The Hatco GRAHL-144D is a 144" Glo-Ray dual strip heater with lights: two high watt heater sections side by side with a 3" spacer between them, and 12 shatter-resistant coated incandescent bulbs to light the food. This listing is the 3" spacer version, 15" deep overall (the 3" spacer is standard). It is rated 7,620 W and built for 120/208 or 120/240V single phase, set at order; the dual-voltage versions run the lights on 120V and the heat on 208V or 240V.
Will it fit · Will it hook up
- Outside size
- 144" W x 15" D x 2-1/2" H with the 3" spacer
- Power
- 7,620 W, single phase, voltage set at order: 120/208V 39.2 A or 120/240V 34.8 A
- Hookup
- Hardwired; 3 ft. conduit with leads on the server's right
- Breaker
- If the heat circuit needs a breaker over 20 A, the lights need their own breaker of 20 A or less
- Mounting height
- Hatco recommends 14" to 18" from element to food for high watt dual models
- Surroundings
- Non-combustible surroundings only; with built-in switches it must be a pass-through, with 10" to the surface below
Measure the pass: the unit is 144" long and 15" deep, and it cannot be installed in combustible surroundings.
Deeper holding area
Two heater sections side by side with a 3" spacer make the unit 15" deep, for a deeper holding area than one single strip.
Built-in display lights
12 shatter-resistant coated incandescent bulbs light the food while protecting it from bulb breakage.
Pre-focused infrared heat
Two tubular metal-sheathed elements and pre-focused reflectors spread 7,620 W across the holding surface with no cold spots.
No-sag aluminum housing
Continuous extruded aluminum housings span the full 144" without sagging, and the reflectors do not blacken.
Tandem elements
At 144" the heater uses tandem end-to-end elements that may be controlled separately, so you can heat only part of the line.
Delivery and setup
- Inspect the carton for damage before you sign, and note any damage on the delivery receipt. Approximate shipping weight is 80 lb., without a remote box.
- Hatco ships dual units with the spacer pre-assembled. A qualified electrician hardwires it to a grounded circuit of the correct voltage, following the wiring diagram supplied with the unit.
- Install it only in non-combustible surroundings. With built-in switches it must be a pass-through, with at least 10" to the surface below.
- If you add a remote control box (RMB), mount it outside the heat zone or the controls will be damaged.
- Clean it daily once it is off and cool: wipe with a damp, non-abrasive cloth and dry it. Never submerge or steam clean it.
Questions buyers ask
What power does it need?
It is single phase and built for 120/208 or 120/240V, set at order. At 7,620 W it draws 120/208V 39.2 A or 120/240V 34.8 A. Hatco does not offer it at 120V.
Why 120/208V or 120/240V?
Those versions have two circuits: 120V for the lights and 208V or 240V for the heat. The wiring diagram with the unit shows the hookup.
What does the spacer do?
The spacer sets the gap between the two heater sections. The 3" spacer is standard and gives a 15" deep unit; the 6" spacer gives 18". This listing has the 3" spacer.
How high should I hang it?
Hatco recommends 14" to 18" from the elements to the food for high watt dual models.
Can I install it under a wooden shelf?
No. Hatco says dual strip heaters cannot be installed in combustible surroundings. With remote switches it can be flush to a non-combustible overshelf.
What warranty does Hatco give?
Hatco repairs or replaces defective parts for 18 months from shipment or registration, whichever is later. The metal-sheathed heating element has 1 year parts and labor plus a second year parts only. Register within 90 days.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | GRAHL-144D |
| Store SKU Model | GRAHL-144D3 = Hatco GRAHL-144D with 3 Inch Spacer |
| Series | Glo-Ray Dual Aluminum Infrared Strip Heater with Lights GRAL-D/GRAHL-D |
| Wattage Class | High Watt |
| Shipping Weight | 80 lb. |
| Shipping Weight Note | Includes PackagingRemote Control Box Not Included |
| Width | 144 Inches |
| Depth | 15 Inches |
| Height | 2.5 Inches |
| Spacer | 3 Inch Spacer Between Two 6 Inch Heater Sections3 Inch Spacer 15 Inches Deep, Standard6 Inch Spacer 18 Inches Deep |
| Wattage | 7,620 Watts |
| Voltage | 120/208 or 120/240 Volts |
| Phase | Single Phase |
| Amps by Voltage | 120/208V 39.2 A120/240V 34.8 A |
| Voltage Note | Voltage Specific, Set at Order120/208V and 120/240V Units Run the Lights on 120V and the Heat on 208V or 240VNot Offered at 120V |
| Connection | Hardwired3 ft. Conduit with Leads, Server's Right |
| Breaker Note | If the Heat Needs a Breaker Over 20 A, the Lights Need Their Own Breaker of 20 A or Less |
| Control Type | Toggle Switch, Chef's Left Side Standard |
| Switch Ratings | Toggle Switch Max. 15 AInfinite Switch Max. 12.2 A, Remote Only |
| Control Options | Remote Infinite or Remote Toggle SwitchesRemote Control Enclosure RMBIndicator Light, Remote OnlyNo Control |
| Element | Two Tubular Metal-Sheathed Infrared ElementsPre-Focused Heat PatternReflector Does Not Blacken |
| Tandem Elements | Contains Tandem End-to-End Elements That May Be Individually Controlled |
| Display Lights | 12 Shatter-Resistant Coated Incandescent Bulbs, 1 per Foot |
| Light Options | No BulbsHalogen Bulb, US and CanadaExtra Lamps up to Two per Foot Less OneBright Annealed ReflectorChef LED Bulb Accessory, Pass-Through 18 Inches or Higher |
| Element Height | 14 to 18 Inches Above the Food, High Watt |
| Surroundings | Non-Combustible Surroundings Only |
| Clearances | Built-In Switches 10 Inches to Surface Below, Pass-Through Only, 1 Inch Below OvershelfRemote Switches 8 Inches to Surface, 3 Inches to Wall, Flush to Overshelf |
| Pass-Through Depth | Dual Unit for a 20 to 24 Inch Deep Pass-Through |
| Exterior | Continuous Extruded Aluminum Housing, Clear Anodized Standard |
| Interior | Heavy-Duty InsulationReinforced Wire Guards |
| Mounting | Four Shelf Mounting Tabs |
| Designer Colors | Warm Red, Black, Gray Granite, White Granite, Navy Blue, Hunter Green, Antique CopperGloss Finishes Radiant Red, Glossy Gray, Bold Black, Gleaming Gold, Brilliant BlueAnti-Microbial PaintNon-Standard Colors Non-Returnable |
| Mounting Options | Adjustable Tubular Stands 10 or 14 Inch, Not in Designer ColorsNon-Adjustable Tubular Stands 10, 12, 14 or 16 Inch |
| Other Options | Sneeze Guards 9-3/8 or 14 Inch, One or Two SidesExtended Leads up to 20 ft. |
| Accessories | Adjustable Angle Brackets 1 to 2 Inch or 7 InchChain Suspension |
| Certifications | cULus, NSF |
| Made In | USA |
| Warranty | 18 Months Limited |
| Warranty Details | Repair or replacement of defective parts for 18 months from shipment or registration, whichever is laterRegister within 90 days of shipment |
| Element Warranty | Metal-Sheathed Food Warmer Element 1 Year Parts and Labor Plus 1 Additional Year Parts Only |
| Not Covered | Light Bulbs, Glass Components and Fuses |
| Service | 24/7 Parts and Service Assistance, US and Canada |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What Our Customers Say

