Hatco GRAHL-24-120-TQS Glo-Ray 24" High Watt Infrared Strip Heater with Lights, Toggle Switch, 120V 620W
Description
A 24-inch high watt heat strip with built-in display lights that keeps plated food hot and well lit at the pass.
The Hatco GRAHL-24-120-TQS is the 120V Quick-Ship version of the Glo-Ray GRAHL-24, a 24" high watt aluminum strip heater with lights. A tubular metal-sheathed element and pre-focused reflector spread 620 W of infrared heat over the food, while 2 shatter-resistant coated incandescent bulbs light the holding area. It draws 5.2 A at 120V, has a built-in toggle switch on the chef's left side, and is hardwired through a 36" flexible metal conduit.
Will it fit · Will it hook up
- Outside size
- 24" W x 9" D x 2-1/2" H aluminum housing
- Power
- 620 W, single phase, 120V, 5.2 A at 120V
- Hookup
- Hardwired; 36" flexible metal conduit with 42" leads on the server's right
- Mounting height
- Hatco recommends 11" to 14" from element to food for high watt models
- Clearances
- At least 13-1/2" above combustible surfaces, 3" from a combustible wall, 1" below an overshelf
- Pass depth
- A single unit suits a 12" to 16" deep pass-through; Hatco recommends a dual unit for 20" to 24"
Measure the span: the housing is 24" long and 9" deep, and keep at least 3" between two strip heaters mounted side by side.
Built-in display lights
2 shatter-resistant coated incandescent bulbs light the food while protecting it from bulb breakage.
Pre-focused infrared heat
The tubular metal-sheathed element and pre-focused reflector cover the holding surface with 620 W, with no cold spots.
No-sag aluminum housing
A continuous extruded aluminum housing spans the full 24" without sagging, and the reflector does not blacken.
High watt output
GRAHL models are Hatco's high watt version, for a pass where the element hangs 11" to 14" above the food.
Simple toggle control
A built-in on/off toggle switch, rated 15 A max., sits on the chef's left side by the lights.
Delivery and setup
- Inspect the carton for damage before you sign, and note any damage on the delivery receipt. Approximate shipping weight is 10 lb.
- A qualified electrician hardwires it to a grounded circuit of the correct voltage. Units are voltage specific; check the specification label and wiring diagram first.
- Use adjustable angle brackets for under-shelf mounting, or chains or tubular stands. Light bulbs are not covered by the warranty.
- Manufacturing oils may smoke for up to 30 minutes at first start-up. Run it empty until the smoke stops.
- Clean it daily once it is off and cool: wipe with a damp, non-abrasive cloth and dry it. Never submerge or steam clean it.
Questions buyers ask
What power does it need?
120V single phase. At 620 W it draws 5.2 A at 120V.
How many bulbs does it have?
2 coated incandescent bulbs; Hatco's standard is one per foot of length. Hatco offers halogen bulbs on 120V units and extra lamps, up to two per foot less one, at the time of purchase.
How high should I hang it?
Hatco recommends 11" to 14" from the element to the food for high watt models, and at least 13-1/2" above combustible surfaces.
How do I clean it?
Turn it off, let it cool, then wipe the metal surfaces with a damp, non-abrasive cloth and dry it. Do not submerge it, steam clean it or use a lot of water.
What warranty does Hatco give?
Hatco repairs or replaces defective parts for 18 months from shipment or registration, whichever is later. The metal-sheathed heating element has 1 year parts and labor plus a second year parts only. Register within 90 days.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | GRAHL-24 |
| Store SKU Model | GRAHL-24-120-TQS = Hatco GRAHL-24, 120V Quick-Ship Version |
| Hatco Item Number | GRAHL24115T |
| Series | Glo-Ray Aluminum Infrared Strip Heater with Lights GRAL/GRAHL |
| Wattage Class | High Watt |
| Shipping Weight | 10 lb. |
| Shipping Weight Note | Includes PackagingRemote Control Box Not Included |
| Width | 24 Inches |
| Depth | 9 Inches |
| Height | 2.5 Inches |
| Wattage | 620 Watts |
| Voltage | 120 Volts |
| Phase | Single Phase |
| Amps | 5.2 Amps |
| Connection | Hardwired36 Inch Flexible Metal Conduit with 42 Inch Wire Leads, Server's Right |
| Breaker Note | If the Heat Needs a Breaker Over 20 A, the Lights Need Their Own Breaker of 20 A or Less |
| Control Type | Built-In Toggle Switch, Chef's Left Side, Light Side |
| Switch Ratings | Toggle Switch Max. 15 AInfinite Switch Max. 12.2 A |
| Element | Tubular Metal-Sheathed Infrared ElementPre-Focused Heat PatternReflector Does Not Blacken |
| Display Lights | 2 Shatter-Resistant Coated Incandescent Bulbs, 1 per Foot |
| Element Height | 11 to 14 Inches Above the Food, High Watt |
| Clearance to Combustibles | 13-1/2 Inches Above Combustible Surfaces3 Inches From a Combustible Wall1 Inch Below an Overshelf |
| Pass-Through Depth | Single Unit for a 12 to 16 Inch Deep Pass-Through |
| Exterior | Continuous Extruded Aluminum Housing, Clear Anodized Standard |
| Interior | Insulated HousingReinforced Wire Guard |
| Mounting | Four Stainless Steel Shelf Mounting Tabs |
| Accessories | Adjustable Angle Brackets 1 to 2 InchChain Suspension |
| Certifications | cULus, NSF |
| Made In | USA |
| Warranty | 18 Months Limited |
| Warranty Details | Repair or replacement of defective parts for 18 months from shipment or registration, whichever is laterRegister within 90 days of shipment |
| Element Warranty | Metal-Sheathed Food Warmer Element 1 Year Parts and Labor Plus 1 Additional Year Parts Only |
| Not Covered | Light Bulbs, Glass Components and Fuses |
| Service | 24/7 Parts and Service Assistance, US and Canada |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What Our Customers Say

