Hatco GRAHL-36D3-120QS Glo-Ray 36" High Watt Dual Aluminum Infrared Strip Heater with Lights, 3" Spacer, 1,780 W, 120V, Toggle Switch
Two 36" infrared warmers side by side with display lights, for a 15" deep pass-through or holding area that needs even top heat.
The Hatco GRAHL-36D3-120QS is a Glo-Ray high watt dual aluminum infrared strip heater with lights: two 36" warmers mounted side by side with a 3" spacer between them, 15" deep and 2-1/2" high. Pre-focused heat from metal-sheathed elements covers the whole holding surface, and 3 coated shatter-resistant incandescent lights show off the food. It is rated 1,780 W. It is set up for 120V single phase. A toggle switch on the chef's left side is standard, and power comes in through 3 ft. of conduit with leads at the server's right. This is the Hatco Quick-Ship configuration, item AHL36D120V: 120V, built-in toggle switch and conduit.
Plan a dedicated 120V circuit: the unit draws 14.8 A, and it is hardwired, not corded.
The pre-focused heat pattern spreads heat evenly with no cold spots, so food holds at serving temperature longer.
3 coated, shatter-resistant incandescent bulbs light the holding area and protect food if a bulb breaks. Halogen and Chef LED bulbs are options.
Two warmers joined by a 3" spacer cover a 15" deep holding area from one 36" long unit.
1,780 W of infrared heat lets you mount it higher, at 14" to 18" above the food.
A reinforced wire guard protects staff without changing the heat pattern of the metal-sheathed element.
It is set up for 120V single phase and draws 14.8 A.
A toggle switch (max. 15 A) on the chef's left side is standard. Remote toggle switches, remote infinite switches or no control (with a Hatco RMB2 box) can be ordered instead. Hatco notes that 120V units of this size may need additional switches, remote only.
It is the spacer between the two warmers. Hatco builds the GRAHL-36D with a 3" spacer (standard, 15" deep) or a 6" spacer (18" deep). This listing has the 3" spacer, 15" deep.
Hatco recommends 14" to 18" above the food for high watt dual units. Do not install it in combustible surroundings. With built-in switches keep 10" to the surface below, use a pass-through location (no back wall) and leave 1" below an overshelf.
This Quick-Ship configuration comes in the standard clear anodized aluminum finish. Designer colors and gloss finishes are factory options on the standard model, at the time of purchase only.
Hatco's limited warranty runs 18 months from shipment or registration, whichever is later. Metal-sheathed food warmer elements have 1 year parts and labor plus 1 more year parts only. Coated light bulbs are not covered. Hatco also offers 24/7 parts and service assistance in the US and Canada.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | GRAHL-36D |
| Listing Code | GRAHL-36D3-120QS = GRAHL-36D with 3" spacer, Quick-Ship item AHL36D120V, 120V, toggle switch, conduit |
| Series | Glo-Ray |
| Type | Dual Aluminum Infrared Strip Heater with Lights |
| Wattage Class | High Watt |
| Shipping Weight | 21 lb. |
| Width | 36 Inches |
| Depth | 15 Inches |
| Height | 2.5 Inches |
| Spacer | 3 InchesStandard, 15" Deep |
| Voltage | 120 Volts |
| Phase | Single |
| Wattage | 1,780 W |
| Amps | 14.8 A at 120V |
| Plug Type | Hardwired |
| Leads | 3 ft. Conduit with Leads, Server's RightExtended Leads 1 to 20 ft. Optional |
| Hatco Notes | 120V Units May Require Additional Switches, Remote Only |
| Control Type | Toggle Switch, Chef's Left Side |
| Switch Ratings | Toggle Switch Max. 15 AInfinite Switch Max. 12.2 A |
| Number of Bulbs | 3 |
| Bulb Type | Coated Shatter-Resistant IncandescentHalogen and Chef LED Optional |
| Housing | Extruded Aluminum, Clear Anodized Standard |
| Element | Metal-Sheathed, Reinforced Wire Guard |
| Mounting Height | 14 to 18 Inches Above Food |
| Clearance | Not for Combustible SurroundingsBuilt-In Switches: 10" to Surface, Pass-Through Only, 1" Below OvershelfRemote Switches: 8" to Surface, 3" to Wall, 0" Below Overshelf |
| Accessories | Adjustable Angle BracketsChain SuspensionChef LED Bulbs |
| Certifications | cULus, NSF |
| Made In | USA |
| Warranty | 18 Months Limited |
| Warranty Detail | Metal-Sheathed Elements 1 Year Parts and Labor Plus 1 Year Parts OnlyCoated Bulbs Not Covered24/7 Parts and Service Assistance, US and Canada |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
