Hatco GRAHL-66 Glo-Ray 66" High Watt Aluminum Infrared Strip Heater with Lights, 1,860 W
A 66" overhead infrared warmer with built-in display lights that keeps plated food hot at the pass or on a holding shelf.
The Hatco GRAHL-66 is a Glo-Ray high watt aluminum infrared strip heater with lights. A pre-focused heat pattern and a reflector that does not blacken spread even heat across the holding area, and 5 coated shatter-resistant incandescent lights show off the food. It is 66" wide, 9" deep and 2-1/2" high and rated 1,860 W. It is built for 120, 120/208 or 120/240V single phase, chosen when you order. A built-in toggle switch sits on the chef's left side, and power comes in through 36" of flexible metal conduit with 42" wire leads.
On 120/208V and 120/240V units the lights run on a 120V circuit and the heat on 208V or 240V, so plan the wiring before install.
The pre-focused heat pattern spreads heat evenly with no cold spots, so food holds at serving temperature longer.
5 coated, shatter-resistant incandescent bulbs light the holding area and protect food if a bulb breaks. Halogen and Chef LED bulbs are options.
The continuous extruded aluminum housing stays straight across the full 66" length, and the reflector does not blacken.
1,860 W of infrared heat lets you mount it higher, at 11" to 14" above the food.
A reinforced wire guard protects staff without changing the heat pattern of the metal-sheathed element.
Choose 120, 120/208 or 120/240V single phase when you order. It draws 15.5 A at 120V, 10.0 A at 120/208V and 9.0 A at 120/240V. On 120/208V and 120/240V units the lights run on 120V and the heat on 208V or 240V.
Yes. A toggle switch (max. 15 A) is built in on the chef's left side. An infinite control (max. 12.2 A) or remote toggle switches in a Hatco RMB box can be ordered instead. Hatco notes that 120V units with an infinite switch need tandem elements, and 120V units may need extra switches.
Hatco recommends 11" to 14" above the food for high watt units. Over combustibles keep 13.5" to the surface below, 3" to the back wall and 1" below an overshelf.
Hatco's spec sheet lists a factory 6 ft. cord set for 120V units 72" or shorter that hang on chains, C-legs or T-legs (this size needs a NEMA 5-20P plug), but the manual says cord sets are not offered on units with lights. Ask us to confirm with Hatco before you order. As listed it is hardwired.
Yes, at the time of purchase only. Clear anodized aluminum is standard; the housing can be ordered in Designer colors Warm Red, Black, Gray Granite, White Granite, Navy Blue, Hunter Green, Antique Copper and Radiant Red, or gloss Glossy Gray, Bold Black, Gleaming Gold and Brilliant Blue. Non-standard colors are non-returnable.
Hatco's limited warranty runs 18 months from shipment or registration, whichever is later. Metal-sheathed food warmer elements have 1 year parts and labor plus 1 more year parts only. Coated light bulbs are not covered. Hatco also offers 24/7 parts and service assistance in the US and Canada.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | GRAHL-66 |
| Series | Glo-Ray |
| Type | Aluminum Infrared Strip Heater with Lights |
| Wattage Class | High Watt |
| Shipping Weight | 22 lb. |
| Width | 66 Inches |
| Depth | 9 Inches |
| Height | 2.5 Inches |
| Voltage | 120, 120/208 or 120/240 Volts |
| Phase | Single, 3-Wire |
| Wattage | 1,860 W |
| Amps | 15.5 A at 120V10.0 A at 120/208V9.0 A at 120/240V |
| Plug Type | Hardwired |
| Leads | 36" Flexible Metal Conduit with 42" Wire Leads, Server's RightExtended Leads 1 to 20 ft. Optional |
| Circuits | 120V Circuit for Lights208V or 240V Circuit for Heat on 120/208V and 120/240V Units |
| Hatco Notes | 120V with Infinite Switch Requires Tandem Elements120V May Require Additional SwitchesCorded Units Require NEMA 5-20P, Not Available for Canada |
| Control Type | Built-In Toggle Switch, Chef's Left Side |
| Switch Ratings | Toggle Switch Max. 15 AInfinite Switch Max. 12.2 A |
| Number of Bulbs | 5 |
| Bulb Type | Coated Shatter-Resistant IncandescentHalogen and Chef LED Optional |
| Housing | Extruded Aluminum, Clear Anodized Standard |
| Element | Metal-Sheathed, Reinforced Wire Guard |
| Mounting Height | 11 to 14 Inches Above Food |
| Clearance | Combustibles: 13.5" to Surface, 3" to Back Wall, 1" Below OvershelfNon-Combustibles, Hardwired with Toggle: 8" to Surface, Pass-Through Only, 1" Below Overshelf |
| Factory Options | Designer and Gloss Housing ColorsIndicator LightTandem ElementsExtended Leads9.375" or 14" Sneeze Guards, One or Two SidesHalogen BulbsExtra LampsBright Annealed Reflector |
| Control and Mounting Options | Infinite ControlRemote Toggle SwitchesRemote BoxTubular, C-Leg or T-Leg StandsCord and Plug SetS Hooks with Chain |
| Accessories | Adjustable Angle Brackets 1" to 2"Chain SuspensionChef LED Bulbs, Pass-Through Only, 10" or Higher |
| Certifications | cULus, NSF |
| Made In | USA |
| Warranty | 18 Months Limited |
| Warranty Detail | Metal-Sheathed Elements 1 Year Parts and Labor Plus 1 Year Parts OnlyCoated Bulbs Not Covered24/7 Parts and Service Assistance, US and Canada |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
