Hatco GRAIHL-72 Glo-Ray High Watt Infra-Black Strip Heater, 72" W, 6 Lights, 2,085W, 120, 120/208 or 120/240V

Hatco GRAIHL-72 Glo-Ray High Watt Infra-Black Strip Heater, 72" W, 6 Lights, 2,085W, 120, 120/208 or 120/240V

HatcoSKU: HAT-GRAIHL-72

Voltages
  • Warranty · Element 1-yr Parts and Labor Plus 1-yr Parts Only · Other Parts 18 Months

Secure checkout

Apple Pay Diners ClubDiscoverGoogle Pay Mastercard Shop Pay Visa

Talk to an equipment specialist

Mon–Sat 8 AM–5 PM ET

Questions about size, power, delivery or a quote for several units?

Call

Will it fit · Will it plug in

Outside (W × D × H)72" × 9" × 2.6"
Power120, 120/208 or 120/240V · 2,085 W
Shipping weight30 lb.
ListedcULus, NSF

Highlights

  • 72" W x 9" D x 2.6" H aluminum strip heater
  • 2,085 W high watt Infra-Black emitter, single phase
  • 120V, 120/208V or 120/240V in the voltage dropdown
  • 6 built-in display lights
  • Needs an RMB remote box or TCBI thermostatic box, ordered with it
  • Hatco recommends mounting 4" to 10" above the target
  • cULus and NSF listed; made in the USA

Specifications

ManufacturerHatco
Model NumberGRAIHL-72
SeriesGlo-Ray High Watt Infra-Black Strip Heater with Lights
TypeHigh Watt Infra-Black Strip Heater
Shipping Weight30 lb.
Weight NoteApproximate, Not Including Remote Control Enclosure
Width72"
Depth9"
Height2.6"
Voltage120, 120/208 or 120/240V
Hertz60 Hz
PhaseSingle Phase
Wattage2,085 Watts
Amps by Voltage120V 17.4 A, 120/208V 11.3 A, 120/240V 10.2 A
Circuits120/208V and 120/240V Units Run Lights on 120V and Heat on 208V or 240V
Connection3 ft. conduit with leads, server's right; 6" leads when supplied with TCBI; hardwired
Voltage NotesHatco's price list notes the infinite switch is not available at 120V.
Heating ElementMetal-Sheathed Element in Infra-Black Emitter
Wattage ClassHigh Watt
Lights6 Bulbs
ControlsRequires a Hatco RMB remote control enclosure or an attached TCBI thermostatic control box, chosen at order
TCBI Box Size8" W x 3" D x 2-1/2" H, Not Including Switches, Chef's Left Side
Recommended Mounting Height4" to 10" Above Target Surface
Minimum ClearancesWith TCBI box: 4" to the surface below, pass-through only, 1" below an overshelf, With RMB: 4" below, 3" to the back wall, 0" below an overshelf
Overshelf SetbackMaximum 10" From the Front of an Overshelf
Recommended Target Width9.5"
HousingExtruded Aluminum, Clear Anodized Standard
InsulationHeavy-Duty Insulation
Factory OptionsDesigner Colors or Gloss Finishes, Housing and RMB, Element Wire Guard, TCBI Thermostatic Control Box with Indicator Lights
More Factory OptionsNon-Adjustable Tubular Stands 4", 6", 7.5", 8" or 10", Extended Leads
AccessoriesAdjustable Angle Brackets 1"-2" or 1"-6", Chain Suspension, Chef LED Bulbs, Pass-Through Only, Unit 11" or Higher
CertificationscULus, NSF
Made InUSA
WarrantyElement 1 Year Parts and Labor Plus 1 Year Parts Only, Other Parts 18 Months
Warranty NotesBulbs Not Covered, 24/7 Parts and Service Assistance in US and Canada

Resources & Documents

Specs

Manufacturer Hatco
Model Number GRAIHL-72
Series Glo-Ray High Watt Infra-Black Strip Heater with Lights
Type High Watt Infra-Black Strip Heater
Shipping Weight 30 lb.
Weight Note Approximate, Not Including Remote Control Enclosure
Width 72 Inches
Depth 9 Inches
Height 2.6 Inches
Voltage 120, 120/208 or 120/240 Volts
Hertz 60 Hz
Phase Single Phase
Wattage 2,085 Watts
Amps by Voltage 120V 17.4 A120/208V 11.3 A120/240V 10.2 A
Circuits 120/208V and 120/240V Units Run Lights on 120V and Heat on 208V or 240V
Connection 3 ft. conduit with leads, server's right; 6" leads when supplied with TCBI; hardwired
Voltage Notes Hatco's price list notes the infinite switch is not available at 120V.
Heating Element Metal-Sheathed Element in Infra-Black Emitter
Wattage Class High Watt
Lights 6 Bulbs
Controls Requires a Hatco RMB remote control enclosure or an attached TCBI thermostatic control box, chosen at order
TCBI Box Size 8" W x 3" D x 2-1/2" H, Not Including Switches, Chef's Left Side
Recommended Mounting Height 4" to 10" Above Target Surface
Minimum Clearances With TCBI box: 4" to the surface below, pass-through only, 1" below an overshelfWith RMB: 4" below, 3" to the back wall, 0" below an overshelf
Overshelf Setback Maximum 10" From the Front of an Overshelf
Recommended Target Width 9.5 Inches
Housing Extruded Aluminum, Clear Anodized Standard
Insulation Heavy-Duty Insulation
Factory Options Designer Colors or Gloss Finishes, Housing and RMBElement Wire GuardTCBI Thermostatic Control Box with Indicator Lights
More Factory Options Non-Adjustable Tubular Stands 4", 6", 7.5", 8" or 10"Extended Leads
Accessories Adjustable Angle Brackets 1"-2" or 1"-6"Chain SuspensionChef LED Bulbs, Pass-Through Only, Unit 11" or Higher
Certifications cULus, NSF
Made In USA
Warranty Element 1 Year Parts and Labor Plus 1 Year Parts OnlyOther Parts 18 Months
Warranty Notes Bulbs Not Covered24/7 Parts and Service Assistance in US and Canada

Certifications

cULus
NSF
Call

Description

Close-range Infra-Black heat for tight spaces: a 72" strip that holds food hot from just 4" to 10" above it.

Hatco Glo-Ray Infra-Black strip heater with attached control box and wire guard, sample photo for GRAIHL-72

The Hatco GRAIHL-72 is a 72" Glo-Ray high watt Infra-Black strip heater with 6 lights. The Infra-Black emitter gives a solid panel of even heat for close mounting, and a thermostat regulates it. It draws 2,085 watts and measures 72" W x 9" D x 2.6" H. It needs a Hatco RMB remote control box or an attached TCBI thermostatic control box, which you choose at order. Pick 120V, 120/208V or 120/240V single phase in the voltage dropdown.

Will it fit · Will it hook up

Outside size
72" W x 9" D x 2.6" H
Power
2,085 W; 120V 17.4 A, 120/208V 11.3 A or 120/240V 10.2 A, single phase
Hookup
3 ft. conduit with leads, server's right; 6" leads when supplied with TCBI; hardwired
Mounting height
Hatco recommends 4" to 10" above the target surface
Clearances
With TCBI box: 4" to the surface below, pass-through only, 1" below an overshelf. With RMB: 4" below, 3" to the back wall, 0" below an overshelf
Controls
Requires a Hatco RMB remote control enclosure or an attached TCBI thermostatic control box, chosen at order

Measure the pass: the housing is 72" wide and 9" deep, and it is hardwired, so plan an electrician.

Infra-Black emitter

A solid black panel gives even, precise heat with no hot spots, made for close mounting over the food.

Thermostatic heat

The heat is thermostatically controlled to hold a consistent temperature.

Lights built in

6 lights show off the food; Chef LED bulbs are an accessory.

Cool aluminum housing

The 72" aluminum housing does not sag, and heavy-duty insulation keeps the outside cool.

Choose your control

Pair it with an RMB remote control box (toggle or infinite switches) or an attached TCBI thermostatic box with indicator lights.

Delivery and setup

  • Inspect the carton for damage before you sign, and note any damage on the delivery receipt. Approximate shipping weight is 30 lb., not including any remote control enclosure.
  • A licensed electrician should hardwire the unit: it comes with 3 ft. conduit with leads, server's right.
  • Order the RMB or TCBI control with the heater. Install a remote box outside the heat zone or it will be damaged.
  • Light-equipped strip heaters that need a breaker of 20 A or more must be installed with a remote control enclosure that has a fuse of 20 A or less for the light circuit.
  • Mount it 4" to 10" above the target surface and keep Hatco's clearances: with TCBI box: 4" to the surface below, pass-through only, 1" below an overshelf. With RMB: 4" below, 3" to the back wall, 0" below an overshelf.
  • Colors, finishes and factory options are made to order and must be chosen at purchase. Non-standard colors are non-returnable.

Questions buyers ask

What power does it need?

It draws 2,085 W: 17.4 A at 120V, 11.3 A at 120/208V or 10.2 A at 120/240V, single phase. On 120/208V and 120/240V units the lights run on 120V and the heat on 208V or 240V.

How high should I mount it?

Hatco recommends 4" to 10" above the target surface. Mount it with tubular stands, angle brackets under a shelf or chain suspension.

Is the control included?

No. Hatco prices the heater without its control. Add an RMB remote control enclosure or a TCBI thermostatic control box (8" x 3" x 2-1/2") when you order.

Can I mount it against a wall?

Only with an RMB remote box (3" to the back wall). With the attached TCBI box it must be a pass-through installation.

What is the warranty?

Hatco covers the metal-sheathed element for 1 year parts and labor plus 1 more year parts only, and other parts for 18 months. Bulbs are not covered. 24/7 parts and service help is available in the US and Canada.

2,085 W High WattInfra-Black panel heat.
72" W x 9" D2.6" high aluminum housing.
120 to 240VSingle phase, hardwired.
6 Display LightsLights the food on the pass.

Specs

Manufacturer Hatco
Model Number GRAIHL-72
Series Glo-Ray High Watt Infra-Black Strip Heater with Lights
Type High Watt Infra-Black Strip Heater
Shipping Weight 30 lb.
Weight Note Approximate, Not Including Remote Control Enclosure
Width 72 Inches
Depth 9 Inches
Height 2.6 Inches
Voltage 120, 120/208 or 120/240 Volts
Hertz 60 Hz
Phase Single Phase
Wattage 2,085 Watts
Amps by Voltage 120V 17.4 A120/208V 11.3 A120/240V 10.2 A
Circuits 120/208V and 120/240V Units Run Lights on 120V and Heat on 208V or 240V
Connection 3 ft. conduit with leads, server's right; 6" leads when supplied with TCBI; hardwired
Voltage Notes Hatco's price list notes the infinite switch is not available at 120V.
Heating Element Metal-Sheathed Element in Infra-Black Emitter
Wattage Class High Watt
Lights 6 Bulbs
Controls Requires a Hatco RMB remote control enclosure or an attached TCBI thermostatic control box, chosen at order
TCBI Box Size 8" W x 3" D x 2-1/2" H, Not Including Switches, Chef's Left Side
Recommended Mounting Height 4" to 10" Above Target Surface
Minimum Clearances With TCBI box: 4" to the surface below, pass-through only, 1" below an overshelfWith RMB: 4" below, 3" to the back wall, 0" below an overshelf
Overshelf Setback Maximum 10" From the Front of an Overshelf
Recommended Target Width 9.5 Inches
Housing Extruded Aluminum, Clear Anodized Standard
Insulation Heavy-Duty Insulation
Factory Options Designer Colors or Gloss Finishes, Housing and RMBElement Wire GuardTCBI Thermostatic Control Box with Indicator Lights
More Factory Options Non-Adjustable Tubular Stands 4", 6", 7.5", 8" or 10"Extended Leads
Accessories Adjustable Angle Brackets 1"-2" or 1"-6"Chain SuspensionChef LED Bulbs, Pass-Through Only, Unit 11" or Higher
Certifications cULus, NSF
Made In USA
Warranty Element 1 Year Parts and Labor Plus 1 Year Parts OnlyOther Parts 18 Months
Warranty Notes Bulbs Not Covered24/7 Parts and Service Assistance in US and Canada

Certifications

cULus
NSF

Payment & Security

Apple Pay Diners Club Discover Google Pay Mastercard Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

What Our Customers Say

Related Products

Recently viewed