Hatco GRAML-60D Glo-Ray Max Watt Dual Infrared Strip Heater with Lights, 60" W x 15" D, 3" Spacer, 3,700 W

Hatco GRAML-60D Glo-Ray Max Watt Dual Infrared Strip Heater with Lights, 60" W x 15" D, 3" Spacer, 3,700 W

HatcoSKU: HAT-GRAML-60D3

Price:
Regular price$1,120.35
  • Warranty · Hatco Limited Warranty · 18 Months Standard

Secure checkout

Apple Pay Diners ClubDiscoverGoogle Pay Mastercard Shop Pay Visa

Talk to an equipment specialist

Mon–Sat 8 AM–5 PM ET

Questions about size, power, delivery or a quote for several units?

Call

Will it fit · Will it plug in

Outside (W × D × H)60" × 15" × 2.5"
Power120, 120/208 or 120/240V · 3,700 W · 30.8 A at 120V, 18.8 A at 120/208V, 16.7 A at 120/240V
Shipping weight38 lb.
ListedcULus, NSF

Highlights

  • 3,700 W Max Watt output, 25% more wattage than Glo-Ray high watt
  • 60" W x 15" D x 2.5" H with 3" spacer between two heater housings
  • 5 shatter-resistant incandescent display lights
  • 120, 120/208 or 120/240 volt single phase; 30.8 A at 120V; 18.8 A at 120/208V; 16.7 A at 120/240V
  • Remote control enclosure with toggle switches and indicator light; hardwired with 36" conduit and 42" leads
  • Recommended mounting height 18" to 24"; non-combustible surroundings only
  • cULus and NSF; made in the USA

Specifications

ManufacturerHatco
Model NumberGRAML-60D
SeriesGlo-Ray Max Watt Dual Aluminum Infrared Strip Heater with Lights
Shipping Weight38 lb.
Shipping Weight NoteIncludes packaging, not the remote control enclosure; add 2 to 8 lb. for the enclosure
Width60"
Depth15"
Height2.5"
Spacer3" Spacer Between Heaters, Standard
Voltage120, 120/208 or 120/240V
PhaseSingle Phase
Wattage3,700 Watts
Amps30.8 A at 120V, 18.8 A at 120/208V, 16.7 A at 120/240V
ConnectionHardwired, 36" Flexible Metal Conduit With 42" Leads, Server's Right
Circuit Note120/208V and 120/240V units run the lights on 120V and the heat on the higher voltage, Lights need a 20 A or smaller breaker or fuse when the heat circuit needs more than 20 A
ElementTubular Metal-Sheathed Infrared Element, 2 Side by Side
Heat PatternPre-Focused Glo-Ray Heat
Lights5 Shatter-Resistant Incandescent Bulbs
Standard ControlsRemote Control Enclosure With Toggle Switches and Indicator Lights, Built-In Controls Not Available
Mounting Height18 to 24"
ClearancesNon-Combustible Surroundings Only, 1" Below Overshelf, 15" to Surface Below, 3" to Back Wall
IncludedAdjustable Angle Brackets, Remote Control Enclosure
HousingExtruded Aluminum, Clear Anodized, Heavy-Duty Insulation, Protective Wire Guard
Factory OptionsDesigner Colors or Gloss Finishes, Extended Leads 1 to 20 ft., Infinite Control Box RMB-GRAM-INF, Bright Annealed Reflector, Tubular Stands, 60 W Halogen Bulbs, No Bulbs
AccessoriesChef LED Bulbs 3000K or 4000K, Pass-Through Only, Unit 18" or Higher
CertificationscULus, NSF
Country of OriginMade in the USA logo on spec sheet
WarrantyHatco Limited Warranty, 18 Months Standard
Warranty NotesMetal-sheathed food warmer elements: 1 year parts and labor plus 1 additional year parts-only, Bulbs and fuses are not covered, Register within 90 days of shipment, 24/7 parts and service assistance in US and Canada

Resources & Documents

Specs

Manufacturer Hatco
Model Number GRAML-60D
Series Glo-Ray Max Watt Dual Aluminum Infrared Strip Heater with Lights
Shipping Weight 38 lb.
Shipping Weight Note Includes packaging, not the remote control enclosure; add 2 to 8 lb. for the enclosure
Width 60 Inches
Depth 15 Inches
Height 2.5 Inches
Spacer 3 Inch Spacer Between Heaters, Standard
Voltage 120, 120/208 or 120/240 Volts
Phase Single Phase
Wattage 3,700 Watts
Amps 30.8 A at 120V18.8 A at 120/208V16.7 A at 120/240V
Connection Hardwired, 36 Inch Flexible Metal Conduit With 42 Inch Leads, Server's Right
Circuit Note 120/208V and 120/240V units run the lights on 120V and the heat on the higher voltageLights need a 20 A or smaller breaker or fuse when the heat circuit needs more than 20 A
Element Tubular Metal-Sheathed Infrared Element, 2 Side by Side
Heat Pattern Pre-Focused Glo-Ray Heat
Lights 5 Shatter-Resistant Incandescent Bulbs
Standard Controls Remote Control Enclosure With Toggle Switches and Indicator LightsBuilt-In Controls Not Available
Mounting Height 18 to 24 Inches
Clearances Non-Combustible Surroundings Only1 Inch Below Overshelf15 Inches to Surface Below3 Inches to Back Wall
Included Adjustable Angle Brackets, Remote Control Enclosure
Housing Extruded Aluminum, Clear AnodizedHeavy-Duty InsulationProtective Wire Guard
Factory Options Designer Colors or Gloss FinishesExtended Leads 1 to 20 ft.Infinite Control Box RMB-GRAM-INFBright Annealed ReflectorTubular Stands60 W Halogen BulbsNo Bulbs
Accessories Chef LED Bulbs 3000K or 4000K, Pass-Through Only, Unit 18 Inches or Higher
Certifications cULus, NSF
Country of Origin Made in the USA logo on spec sheet
Warranty Hatco Limited Warranty, 18 Months Standard
Warranty Notes Metal-sheathed food warmer elements: 1 year parts and labor plus 1 additional year parts-onlyBulbs and fuses are not coveredRegister within 90 days of shipment24/7 parts and service assistance in US and Canada

Certifications

cULus
NSF
Call

Description

Two Max Watt infrared elements side by side cover a deeper 60" pass-through or holding area, with display lights over the food.

Hatco GRAML-60D Glo-Ray Max Watt dual strip heater with lights, bottom view; a longer GRAML-D unit with tandem elements is shown

The Hatco GRAML-60D Glo-Ray Max Watt Dual Infrared Strip Heater with Lights mounts two aluminum strip heaters side by side for a deeper holding area. This listing is the 3" spacer version (the standard spacer), which makes the unit 60" wide and 15" deep. It is rated 3,700 W and has 5 shatter-resistant incandescent lights. Hatco offers it in 120, 120/208 or 120/240 volt single phase; choose the voltage when you order.

Will it fit · Will it hook up

Outside size
60" W x 15" D x 2.5" H with the 3" spacer
Mounting height
18" to 24" above the food; target width 21"
Clearances
Non-combustible surroundings only: 1" below an overshelf, 15" to the surface below, 3" to the back wall
Power
120, 120/208 or 120/240V single phase, 3,700 W; 30.8 A at 120V; 18.8 A at 120/208V; 16.7 A at 120/240V. Hardwired with 36" flexible conduit and 42" leads, server's right

For a 20" to 24" deep pass-through Hatco recommends a dual unit like this one.

Max Watt output

Rated 3,700 W, 25% more wattage than Glo-Ray high watt units, from a tubular metal-sheathed element.

Side-by-side elements

Two heater housings with a 3" spacer between them give a deeper heated area, 15" overall.

Pre-focused heat

The heat pattern bathes the whole holding surface and keeps food hot longer without cooking it further.

Shatter-resistant lights

5 coated incandescent bulbs light the food and guard against injury and food contamination if a bulb breaks.

Remote control box

Includes a remote control enclosure with toggle switches and indicator lights; built-in controls are not available on dual units.

Extruded aluminum housing

The sturdy clear anodized aluminum housing does not sag, and heavy-duty insulation cuts heat loss.

Delivery and setup

  • Inspect the carton for damage before you sign, and note any damage on the delivery receipt.
  • Approximate shipping weight is 38 lb. with packaging; the remote control enclosure adds 2 to 8 lb.
  • Units are voltage-specific and must be hardwired by a qualified, licensed electrician to local codes.
  • Mount the remote control box outside the heat zone, and do not hide a pass-through unit behind a decorative soffit.
  • If the heat circuit needs a breaker larger than 20 A, the lights need their own breaker or fuse of 20 A or less.

Questions buyers ask

What power does it need?

Hatco builds it for 120, 120/208 or 120/240 volt single phase at 3,700 W. Amp draw: 30.8 A at 120V; 18.8 A at 120/208V; 16.7 A at 120/240V. On 120/208V and 120/240V units the lights run on 120V and the heat on the higher voltage.

What is the difference between the 3" and 6" spacer?

The spacer sits between the two heaters. With the 3" spacer the unit is 15" deep; with the 6" spacer it is 18" deep. This listing has the 3" spacer.

Does it plug in?

No. It ships with 36" of flexible metal conduit and 42" leads on the server's right and needs a hardwired connection by a qualified electrician.

How high should I mount it?

Hatco recommends 18" to 24" above the food. Keep 1" below an overshelf, 15" to the surface below and 3" to the back wall, in non-combustible surroundings only.

Can I get a color or other options?

Yes, at the time of purchase: Designer colors or gloss finishes for the housing and control box, extended power leads, an electronic infinite control box, a bright annealed reflector, tubular stands, halogen bulbs, or no bulbs. Non-standard colors are non-returnable.

Can I use LED bulbs?

Hatco offers Chef LED bulbs in 3000K or 4000K. On this model they are for pass-through use only, with the bulbs rotated down and the unit at least 18" above the surface.

What certifications and warranty does it have?

The spec sheet shows cULus and NSF marks and Made in the USA. Hatco's limited warranty is 18 months, with metal-sheathed food warmer elements covered 1 year parts and labor plus 1 more year parts-only; bulbs are not covered.

3,700 Watts25% more than Glo-Ray high watt.
60" W x 15" D Unit3" spacer, 5 display bulbs.
120, 120/208, 120/240VSingle phase, hardwired.
cULus, NSFMade in the USA.

Specs

Manufacturer Hatco
Model Number GRAML-60D
Series Glo-Ray Max Watt Dual Aluminum Infrared Strip Heater with Lights
Shipping Weight 38 lb.
Shipping Weight Note Includes packaging, not the remote control enclosure; add 2 to 8 lb. for the enclosure
Width 60 Inches
Depth 15 Inches
Height 2.5 Inches
Spacer 3 Inch Spacer Between Heaters, Standard
Voltage 120, 120/208 or 120/240 Volts
Phase Single Phase
Wattage 3,700 Watts
Amps 30.8 A at 120V18.8 A at 120/208V16.7 A at 120/240V
Connection Hardwired, 36 Inch Flexible Metal Conduit With 42 Inch Leads, Server's Right
Circuit Note 120/208V and 120/240V units run the lights on 120V and the heat on the higher voltageLights need a 20 A or smaller breaker or fuse when the heat circuit needs more than 20 A
Element Tubular Metal-Sheathed Infrared Element, 2 Side by Side
Heat Pattern Pre-Focused Glo-Ray Heat
Lights 5 Shatter-Resistant Incandescent Bulbs
Standard Controls Remote Control Enclosure With Toggle Switches and Indicator LightsBuilt-In Controls Not Available
Mounting Height 18 to 24 Inches
Clearances Non-Combustible Surroundings Only1 Inch Below Overshelf15 Inches to Surface Below3 Inches to Back Wall
Included Adjustable Angle Brackets, Remote Control Enclosure
Housing Extruded Aluminum, Clear AnodizedHeavy-Duty InsulationProtective Wire Guard
Factory Options Designer Colors or Gloss FinishesExtended Leads 1 to 20 ft.Infinite Control Box RMB-GRAM-INFBright Annealed ReflectorTubular Stands60 W Halogen BulbsNo Bulbs
Accessories Chef LED Bulbs 3000K or 4000K, Pass-Through Only, Unit 18 Inches or Higher
Certifications cULus, NSF
Country of Origin Made in the USA logo on spec sheet
Warranty Hatco Limited Warranty, 18 Months Standard
Warranty Notes Metal-sheathed food warmer elements: 1 year parts and labor plus 1 additional year parts-onlyBulbs and fuses are not coveredRegister within 90 days of shipment24/7 parts and service assistance in US and Canada

Certifications

cULus
NSF

Payment & Security

Apple Pay Diners Club Discover Google Pay Mastercard Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

What Our Customers Say

Related Products

Recently viewed