Hatco GRAML-72 Glo-Ray Max Watt Infrared Strip Heater with Lights, 72" W, 2,435 W, 6 Bulbs

Hatco GRAML-72 Glo-Ray Max Watt Infrared Strip Heater with Lights, 72" W, 2,435 W, 6 Bulbs

HatcoSKU: HAT-GRAML-72

Voltages
  • Warranty · Hatco Limited Warranty · 18 Months Standard

Secure checkout

Apple Pay Diners ClubDiscoverGoogle Pay Mastercard Shop Pay Visa

Talk to an equipment specialist

Mon–Sat 8 AM–5 PM ET

Questions about size, power, delivery or a quote for several units?

Call

Will it fit · Will it plug in

Outside (W × D × H)72" × 9" × 2.5"
Power120, 120/208 or 120/240V · 2,435 W · 20.3 A at 120V, 13.0 A at 120/208V, 11.6 A at 120/240V
Shipping weight29 lb.
ListedcULus, NSF

Highlights

  • 2,435 W Max Watt output, 25% more wattage than Glo-Ray high watt
  • 72" W x 9" D x 2.5" H clear anodized extruded aluminum housing
  • 6 shatter-resistant incandescent display lights
  • 120, 120/208 or 120/240 volt single phase; 20.3 A at 120V; 13.0 A at 120/208V; 11.6 A at 120/240V
  • Remote control enclosure with toggle switches and indicator light; hardwired with 36" conduit and 42" leads
  • Recommended mounting height 14" to 18" on adjustable angle brackets; non-combustible surroundings only
  • cULus and NSF; made in the USA

Specifications

ManufacturerHatco
Model NumberGRAML-72
SeriesGlo-Ray Max Watt Aluminum Infrared Strip Heater with Lights
Shipping Weight29 lb.
Shipping Weight NoteIncludes packaging, not the remote control enclosure; add 2 to 8 lb. for the enclosure
Width72"
Depth9"
Height2.5"
Voltage120, 120/208 or 120/240V
PhaseSingle Phase
Wattage2,435 Watts
Amps20.3 A at 120V, 13.0 A at 120/208V, 11.6 A at 120/240V
ConnectionHardwired, 36" Flexible Metal Conduit With 42" Leads, Server's Right
Circuit Note120/208V and 120/240V units run the lights on 120V and the heat on the higher voltage, Lights need a 20 A or smaller breaker or fuse when the heat circuit needs more than 20 A
120V and Control Notes120V units are not available with built-in controls
ElementTubular Metal-Sheathed Infrared Element
Heat PatternPre-Focused Glo-Ray Heat
Lights6 Shatter-Resistant Incandescent Bulbs
Standard ControlsRemote Control Enclosure With Toggle Element Switch, Indicator Light and Toggle Light Switch, Built-In Toggle Control Optional Except on 120V
Mounting Height14 to 18" on Adjustable Angle Brackets
ClearancesNon-Combustible Surroundings Only, Pass-Through: 1" Above, 12" to Surface Below, Corner: 3" From Back Wall
IncludedAdjustable Angle Brackets, Remote Control Enclosure
HousingExtruded Aluminum, Clear Anodized, Heavy-Duty Insulation, Protective Wire Guard
Factory OptionsDesigner Colors or Gloss Finishes, Extended Leads 1 to 20 ft., Infinite Control Box RMB-GRAM-INF, Bright Annealed Reflector, Tubular Stands, 60 W Halogen Bulbs, No Bulbs on 120V Units, Built-In Toggle Control, Not on 120V
AccessoriesChef LED Bulbs 3000K or 4000K, Pass-Through Only, Unit 13" or Higher
CertificationscULus, NSF
Country of OriginMade in the USA logo on spec sheet
WarrantyHatco Limited Warranty, 18 Months Standard
Warranty NotesMetal-sheathed food warmer elements: 1 year parts and labor plus 1 additional year parts-only, Bulbs and fuses are not covered, Register within 90 days of shipment, 24/7 parts and service assistance in US and Canada

Resources & Documents

Specs

Manufacturer Hatco
Model Number GRAML-72
Series Glo-Ray Max Watt Aluminum Infrared Strip Heater with Lights
Shipping Weight 29 lb.
Shipping Weight Note Includes packaging, not the remote control enclosure; add 2 to 8 lb. for the enclosure
Width 72 Inches
Depth 9 Inches
Height 2.5 Inches
Voltage 120, 120/208 or 120/240 Volts
Phase Single Phase
Wattage 2,435 Watts
Amps 20.3 A at 120V13.0 A at 120/208V11.6 A at 120/240V
Connection Hardwired, 36 Inch Flexible Metal Conduit With 42 Inch Leads, Server's Right
Circuit Note 120/208V and 120/240V units run the lights on 120V and the heat on the higher voltageLights need a 20 A or smaller breaker or fuse when the heat circuit needs more than 20 A
120V and Control Notes 120V units are not available with built-in controls
Element Tubular Metal-Sheathed Infrared Element
Heat Pattern Pre-Focused Glo-Ray Heat
Lights 6 Shatter-Resistant Incandescent Bulbs
Standard Controls Remote Control Enclosure With Toggle Element Switch, Indicator Light and Toggle Light SwitchBuilt-In Toggle Control Optional Except on 120V
Mounting Height 14 to 18 Inches on Adjustable Angle Brackets
Clearances Non-Combustible Surroundings OnlyPass-Through: 1 Inch Above, 12 Inches to Surface BelowCorner: 3 Inches From Back Wall
Included Adjustable Angle Brackets, Remote Control Enclosure
Housing Extruded Aluminum, Clear AnodizedHeavy-Duty InsulationProtective Wire Guard
Factory Options Designer Colors or Gloss FinishesExtended Leads 1 to 20 ft.Infinite Control Box RMB-GRAM-INFBright Annealed ReflectorTubular Stands60 W Halogen BulbsNo Bulbs on 120V UnitsBuilt-In Toggle Control, Not on 120V
Accessories Chef LED Bulbs 3000K or 4000K, Pass-Through Only, Unit 13 Inches or Higher
Certifications cULus, NSF
Country of Origin Made in the USA logo on spec sheet
Warranty Hatco Limited Warranty, 18 Months Standard
Warranty Notes Metal-sheathed food warmer elements: 1 year parts and labor plus 1 additional year parts-onlyBulbs and fuses are not coveredRegister within 90 days of shipment24/7 parts and service assistance in US and Canada

Certifications

cULus
NSF
Call

Description

Keeps hot food at serving temperature on a 72" pass-through or line, with display lights over the food.

Hatco GRAML-72 Glo-Ray Max Watt strip heater with lights, bottom view; a 3-bulb GRAML-36 is shown

The Hatco GRAML-72 Glo-Ray Max Watt Infrared Strip Heater with Lights holds pre-heated food at serving temperature. A pre-focused heat pattern from a tubular metal-sheathed element covers the holding surface, and Max Watt units put out 25% more wattage than Glo-Ray high watt models. The 72" aluminum housing is 9" deep, rated 2,435 W, with 6 shatter-resistant incandescent lights. Hatco offers it in 120, 120/208 or 120/240 volt single phase; choose the voltage when you order.

Will it fit · Will it hook up

Outside size
72" W x 9" D x 2.5" H
Mounting height
14" to 18" above the food on the adjustable angle brackets
Clearances
Non-combustible surroundings only: 1" above, 12" to the surface below in a pass-through; 3" to a non-combustible back wall in a corner mount
Power
120, 120/208 or 120/240V single phase, 2,435 W; 20.3 A at 120V; 13.0 A at 120/208V; 11.6 A at 120/240V. Hardwired with 36" flexible conduit and 42" leads, server's right

A single unit suits a 12" to 16" deep pass-through; for 20" to 24" Hatco recommends a dual unit.

Max Watt output

Rated 2,435 W, 25% more wattage than Glo-Ray high watt units, from a tubular metal-sheathed element.

Pre-focused heat

The heat pattern bathes the whole holding surface and keeps food hot longer without cooking it further.

Shatter-resistant lights

6 coated incandescent bulbs light the food and guard against injury and food contamination if a bulb breaks.

Remote control box

Standard controls are a toggle element switch, indicator light and separate light switch in a remote control enclosure, mounted outside the heat zone.

Extruded aluminum housing

The sturdy clear anodized aluminum housing does not sag, and heavy-duty insulation cuts heat loss.

Delivery and setup

  • Inspect the carton for damage before you sign, and note any damage on the delivery receipt.
  • Approximate shipping weight is 29 lb. with packaging; the remote control enclosure adds 2 to 8 lb.
  • Units are voltage-specific and must be hardwired by a qualified, licensed electrician to local codes.
  • Mount the remote control box outside the heat zone, and do not hide a pass-through unit behind a decorative soffit.
  • If the heat circuit needs a breaker larger than 20 A, the lights need their own breaker or fuse of 20 A or less.

Questions buyers ask

What power does it need?

Hatco builds it for 120, 120/208 or 120/240 volt single phase at 2,435 W. Amp draw: 20.3 A at 120V; 13.0 A at 120/208V; 11.6 A at 120/240V. On 120/208V and 120/240V units the lights run on 120V and the heat on the higher voltage. Hatco notes: 120V units are not available with built-in controls.

Does it plug in?

No. It ships with 36" of flexible metal conduit and 42" leads on the server's right and needs a hardwired connection by a qualified electrician.

How high should I mount it?

Hatco recommends 14" to 18" above the food using the adjustable angle brackets. In a pass-through keep 1" above and 12" to the surface below, in non-combustible surroundings only.

Can I get a color or other options?

Yes, at the time of purchase: Designer colors or gloss finishes for the housing and control box, extended power leads, an electronic infinite control box, a bright annealed reflector, tubular stands, halogen bulbs, or no bulbs on 120V units. Non-standard colors are non-returnable.

Can I use LED bulbs?

Hatco offers Chef LED bulbs in 3000K or 4000K. On this model they are for pass-through use only, with the bulbs rotated down and the unit at least 13" above the surface.

What certifications and warranty does it have?

The spec sheet shows cULus and NSF marks and Made in the USA. Hatco's limited warranty is 18 months, with metal-sheathed food warmer elements covered 1 year parts and labor plus 1 more year parts-only; bulbs are not covered.

2,435 Watts25% more than Glo-Ray high watt.
72" Wide x 9" Deep6 shatter-resistant display bulbs.
120, 120/208, 120/240VSingle phase, hardwired.
cULus, NSFMade in the USA.

Specs

Manufacturer Hatco
Model Number GRAML-72
Series Glo-Ray Max Watt Aluminum Infrared Strip Heater with Lights
Shipping Weight 29 lb.
Shipping Weight Note Includes packaging, not the remote control enclosure; add 2 to 8 lb. for the enclosure
Width 72 Inches
Depth 9 Inches
Height 2.5 Inches
Voltage 120, 120/208 or 120/240 Volts
Phase Single Phase
Wattage 2,435 Watts
Amps 20.3 A at 120V13.0 A at 120/208V11.6 A at 120/240V
Connection Hardwired, 36 Inch Flexible Metal Conduit With 42 Inch Leads, Server's Right
Circuit Note 120/208V and 120/240V units run the lights on 120V and the heat on the higher voltageLights need a 20 A or smaller breaker or fuse when the heat circuit needs more than 20 A
120V and Control Notes 120V units are not available with built-in controls
Element Tubular Metal-Sheathed Infrared Element
Heat Pattern Pre-Focused Glo-Ray Heat
Lights 6 Shatter-Resistant Incandescent Bulbs
Standard Controls Remote Control Enclosure With Toggle Element Switch, Indicator Light and Toggle Light SwitchBuilt-In Toggle Control Optional Except on 120V
Mounting Height 14 to 18 Inches on Adjustable Angle Brackets
Clearances Non-Combustible Surroundings OnlyPass-Through: 1 Inch Above, 12 Inches to Surface BelowCorner: 3 Inches From Back Wall
Included Adjustable Angle Brackets, Remote Control Enclosure
Housing Extruded Aluminum, Clear AnodizedHeavy-Duty InsulationProtective Wire Guard
Factory Options Designer Colors or Gloss FinishesExtended Leads 1 to 20 ft.Infinite Control Box RMB-GRAM-INFBright Annealed ReflectorTubular Stands60 W Halogen BulbsNo Bulbs on 120V UnitsBuilt-In Toggle Control, Not on 120V
Accessories Chef LED Bulbs 3000K or 4000K, Pass-Through Only, Unit 13 Inches or Higher
Certifications cULus, NSF
Country of Origin Made in the USA logo on spec sheet
Warranty Hatco Limited Warranty, 18 Months Standard
Warranty Notes Metal-sheathed food warmer elements: 1 year parts and labor plus 1 additional year parts-onlyBulbs and fuses are not coveredRegister within 90 days of shipment24/7 parts and service assistance in US and Canada

Certifications

cULus
NSF

Payment & Security

Apple Pay Diners Club Discover Google Pay Mastercard Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

What Our Customers Say

Related Products

Recently viewed