Hatco GRCSCL-24 Glo-Ray Countertop Carving Station, Ceramic Top Heat, 4 Lights, 120V
Description
A portable countertop carving station that keeps roasts hot under ceramic radiant heat on a buffet or chef station.
The Hatco Glo-Ray GRCSCL-24 projects high-intensity radiant heat from overhead ceramic elements over the whole carving area, with four shatter-resistant incandescent lights. The housing height adjusts to give 17-1/2" to 23-1/2" of clearance above the base. This model has no base heat; top heat is set with an infinite control. A right-hand sneeze guard is standard. It plugs into a standard 120V outlet with its 6 ft. cord.
Will it fit · Will it hook up
- Outside size
- 26" W x 28" D x 22-1/2" to 28-1/2" H; width includes the accessory left-hand sneeze guard
- Clearance
- 17-1/2" to 23-1/2" from the top of the base to the bottom of the warmer housing
- Power
- 120V, 60 Hz, single phase, 990 W, 8.3 A; 6 ft. cord with NEMA 5-15P plug at the back of the base
- Counter
- Hatco designs it for metal countertops; other surfaces must handle up to 200°F for long periods
The left-hand sneeze guard, drip pan and cutting board are accessories, not included.
Ceramic radiant heat
Overhead ceramic elements project high-intensity radiant heat over the entire target area to extend holding times.
Top heat control
An infinite control sets the ceramic top heat. Choose the GRCSCLH-24 if you need base heat.
Adjustable height
The housing adjusts for 17-1/2" to 23-1/2" of clearance to fit large roasts.
Display lighting
Four shatter-resistant incandescent lights show the food and guard against bulb breakage.
Portable
A 72" cord and plug let you move it between buffet lines; pair it with a Flav-R-Savor holding cabinet for a full serving station.
Delivery and setup
- Inspect the carton for damage before you sign, and note any damage on the delivery receipt.
- Approximate shipping weight is 57 lb. Do not lay the unit on its control panel side.
- Set it on a metal countertop, or check that the surface can take up to 200°F. Hatco does not cover countertop damage.
- Plug into a grounded 120V receptacle for the NEMA 5-15P plug. Locate it indoors where room air is at least 70°F.
- Do not submerge or soak the cutting board accessory; Hatco does not cover cutting board damage.
Questions buyers ask
Is the cutting board included?
No. The foodsafe cutting board (18" x 24" x 1-3/4"), stainless drip pan (20" x 26-3/4" x 1") and left-hand sneeze guard kit are accessories. A right-hand sneeze guard is standard.
What outlet does it need?
A grounded 120V outlet. It draws 8.3 A at 990 W and has a 6 ft. cord with a NEMA 5-15P plug.
Does it have a heated base?
No. The GRCSCL-24 uses overhead ceramic heat only. The GRCSCLH-24 adds a thermostatically controlled heated base.
How tall a roast fits?
Clearance from the base to the bottom of the warmer housing adjusts from 17-1/2" to 23-1/2".
What warranty does it have?
The GRCSCL manual lists a 1-year parts and labor warranty. Hatco's spec sheet adds that the ceramic and blanket heating elements are covered against burnout and breakage for one year in the US and Canada.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | GRCSCL-24 |
| Series | Glo-Ray Carving Station, GRCSCL |
| Type | Countertop Carving Station |
| Shipping Weight | 57 lb. |
| Width | 26 Inches |
| Depth | 28 Inches |
| Height | 22.5 to 28.5 Inches |
| Size Detail | Width Includes Accessory Left-Hand Sneeze GuardHeight Adjustable |
| Carving Clearance | 17-1/2" to 23-1/2" Base to Warmer Housing |
| Top Heat | Ceramic Elements, Infinite Control |
| Base Heat | No Base Heat |
| Display Lights | 4 Shatter-Resistant Incandescent Bulbs |
| Voltage | 120 Volts |
| Hertz | 60 Hz |
| Phase | 1 |
| Watts | 990 Watts |
| Amps | 8.3 Amps |
| Plug Type | NEMA 5-15P |
| Cord | 6 ft. Cord and PlugBack Side of Base |
| Included | Right-Hand Sneeze Guard |
| Factory Options | 60 W Halogen Bulbs in Place of Standard Display Lights |
| Accessories | Left-Hand Sneeze Guard KitStainless Steel Drip Pan 20" x 26-3/4" x 1"Foodsafe Cutting Board 18" x 24" x 1-3/4"Chef LED Bulbs |
| Certifications | cULus, UL EPH Classified ANSI/NSF 4, CE |
| Country of Origin | Made in the USA |
| Warranty | 1 Year Parts and Labor |
| Warranty Detail | Ceramic and Blanket Elements 1 Year Against Burnout and Breakage, U.S. and Canada |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What Our Customers Say


