Hatco GRFHS-PTT21 Glo-Ray Pass-Through Tunnel Fry Holding Station, 24.78" W x 38.00" D, 120V, 1740 W
A countertop fry dump station that holds fries hot and crisp from above and below, right beside the fryer.
The Hatco GRFHS-PTT21 is a Glo-Ray fry holding station built to sit right next to the fryer. Ceramic heating elements above and a preset, thermostatically controlled heated base below keep fries and other fried foods at serving temperature without cooking or drying them out. It uses a pass-through tunnel, so the fryer side loads and the service side scoops from the other end. A stainless steel bottom trivet lifts food off the base so moisture does not build up, and the sectional divider lets you hold two products at once. It plugs into a standard 120V outlet.
Set it at a counter height that suits the fry cook, close to the fryer, and out of air currents from hoods, ducts and drive-through windows.
Ceramic heating elements above leave ample space between the warmer and the food bin to empty baskets, while the preset heated base wraps the product in heat from below.
The stainless steel bottom trivet lifts food off the bottom of the station, which promotes air movement and reduces moisture build-up.
The sectional divider fits in any of the trivet slots so you can hold two products side by side.
The tunnel layout runs product from the fryer side to the service side. Hatco calls for 36" of open space front and rear.
A fixed scoop holder comes standard on this model (scoop not included).
Two shatter-resistant incandescent display lights with wire guards light the food. A 60 W halogen bulb (120V only) or Chef LED bulbs are optional.
A grounded 120V receptacle for a NEMA 5-15P plug. The unit draws 1740 watts and 14.5 amps.
It measures 24.78" wide, 38.00" deep and 22.50" high. Keep it at least 1" from combustible walls and materials, with 36" clear in front and behind.
The heated base thermostat is preset at the factory. If it needs adjustment, Hatco asks you to contact the factory.
Hatco lists FHS4BOX, FHS5BAG, FHS5BOX, FHS6BAG, FHS6BB, FHS7BAG hardcoated fry ribbons for the GRFHS-PTT21. They are sold separately.
Turn it off, unplug it and let it cool. Remove the trivet, divider and ribbons and wash them in a dishwasher or sink, then wipe the unit with a damp, non-abrasive cloth. Do not submerge it or use a jet spray.
Hatco's limited warranty covers defects in materials and workmanship for 18 months, counted from shipment or from product registration, whichever is later. Register the unit with Hatco within 90 days of shipment.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | GRFHS-PTT21 |
| Series | Glo-Ray Pass-Through Tunnel Fry Holding Station |
| Shipping Weight | 100 lb. |
| Width | 24.78 Inches |
| Depth | 38.00 Inches |
| Height | 22.50 Inches |
| Front and Rear Clearance | 36 Inches |
| Voltage | 120 Volts |
| Phase | 1 |
| Wattage | 1740 Watts |
| Amps | 14.5 Amps |
| Plug Type | NEMA 5-15P |
| Cord | 6 ft.Lower Right-Hand Side |
| Top Heat | Ceramic Heating Elements |
| Base Heat | Preset Thermostatically Controlled Heated Base |
| Display Lights | 2 Shatter-Resistant Incandescent with Wire Guards |
| Warm-Up Time | 20 to 30 Minutes |
| Control Type | Lighted On/Off SwitchBase Thermostat Preset at Factory |
| Construction | Aluminum and Stainless Steel |
| Standard Accessories | Stainless Steel Bottom TrivetSectional DividerSlotted Holding BinFixed Scoop Holder |
| Factory Options | 60 W Halogen Bulb, 120V OnlyChef LED Bulbs 3000K or 4000K |
| Fry Ribbons | FHS4BOX 4-Pleat BoxFHS5BAG 5-Pleat BagFHS5BOX 5-Pleat BoxFHS6BAG 6-Pleat BagFHS6BB 6-Pleat Box/BagFHS7BAG 7-Pleat Bag |
| Certifications | UL, cUL, NSF |
| Warranty | 18 Months Limited |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
