Hatco GRNM-24 Glo-Ray Narrow Max Watt Infrared Strip Heater, 24" W, 650W, 120, 208 or 240V, Stainless

Hatco GRNM-24 Glo-Ray Narrow Max Watt Infrared Strip Heater, 24" W, 650W, 120, 208 or 240V, Stainless

HatcoSKU: HAT-GRNM-24

Voltages
  • Warranty · 18 Months Limited

Secure checkout

Apple Pay Diners ClubDiscoverGoogle Pay Mastercard Shop Pay Visa

Talk to an equipment specialist

Mon–Sat 8 AM–5 PM ET

Questions about size, power, delivery or a quote for several units?

Call

Will it fit · Will it plug in

Outside (W × D × H)24" × 4" × 2"
Power120, 208 or 240V · 650 W · 5.4 at 120V, 3.1 at 208V, 2.7 at 240V
Shipping weight8 lb.
ListedcULus, UL EPH Classified ANSI/NSF 4

Highlights

  • 650 watts, max watt, from a tubular metal-sheathed infrared element
  • 24" W x 4" D x 2" H slim housing; 8 lb. shipping weight
  • Single phase 120, 208 or 240V, set at order: 120V 5.4 A, 208V 3.1 A or 240V 2.7 A
  • Stainless steel housing and angle brackets; no built-in controls, RMB2 remote box required
  • Recommended mounting height 14" to 18" above the food
  • cULus and UL EPH Classified ANSI/NSF 4; made in the USA
  • 18-month Hatco limited warranty

Specifications

ManufacturerHatco
Model NumberGRNM-24
SeriesGlo-Ray Narrow Infrared Strip Heaters
TypeMax Watt Infrared Strip Heater
Shipping Weight8 lb.
Width24"
Depth4"
Height2"
Voltage120, 208 or 240V
Phase1
Wattage650 Watts
Amps5.4 at 120V, 3.1 at 208V, 2.7 at 240V
Voltage SelectionOne voltage per unit, specified at order
ConnectionHardwired, 6 in. Leads on Server's Right
ElementTubular Metal-Sheathed Infrared
Recommended Mounting Height14 to 18"
Control TypeRemote Control Enclosure Required, RMB2-1R or RMB2-2R Series, No Built-In Controls
HousingStainless Steel
MountingStainless Steel 1.5 in. Angle Brackets
Minimum ClearancesNon-Combustible Surroundings Only, 12 in. to Surface Below, 3 in. to Wall, 1 in. Below Overshelf
Factory OptionsExtended Leads 1 to 20 ft., 14 or 16 in. Non-Adjustable Tubular Stands, Stainless
CertificationscULus, UL EPH Classified ANSI/NSF 4
Made InUSA
Warranty18 Months Limited
Warranty DetailsRepair or replacement of defective parts for 18 months from shipment or registration, whichever is later, 24/7 parts and service assistance in US and Canada
Element CoverageMetal-sheathed food warmer elements: 1 year parts and labor plus 1 additional year parts only

Resources & Documents

Specs

Manufacturer Hatco
Model Number GRNM-24
Series Glo-Ray Narrow Infrared Strip Heaters
Type Max Watt Infrared Strip Heater
Shipping Weight 8 lb.
Width 24 Inches
Depth 4 Inches
Height 2 Inches
Voltage 120, 208 or 240 Volts
Phase 1
Wattage 650 Watts
Amps 5.4 at 120V3.1 at 208V2.7 at 240V
Voltage Selection One voltage per unit, specified at order
Connection Hardwired6 in. Leads on Server's Right
Element Tubular Metal-Sheathed Infrared
Recommended Mounting Height 14 to 18 Inches
Control Type Remote Control Enclosure Required, RMB2-1R or RMB2-2R SeriesNo Built-In Controls
Housing Stainless Steel
Mounting Stainless Steel 1.5 in. Angle Brackets
Minimum Clearances Non-Combustible Surroundings Only12 in. to Surface Below3 in. to Wall1 in. Below Overshelf
Factory Options Extended Leads 1 to 20 ft.14 or 16 in. Non-Adjustable Tubular Stands, Stainless
Certifications cULus, UL EPH Classified ANSI/NSF 4
Made In USA
Warranty 18 Months Limited
Warranty Details Repair or replacement of defective parts for 18 months from shipment or registration, whichever is later24/7 parts and service assistance in US and Canada
Element Coverage Metal-sheathed food warmer elements: 1 year parts and labor plus 1 additional year parts only

Certifications

cULus
UL EPH Classified ANSI/NSF 4
Call

Description

A 24-inch, 2-inch-tall stainless strip heater with Max Watt output for buffet lines where the heater must stay out of sight.

Hatco Glo-Ray Narrow strip heater with angle brackets, shown in black housing

The Hatco GRNM-24 is the Max Watt version of the Glo-Ray Narrow strip heater: 650 watts from a tubular metal-sheathed element in a stainless steel housing only 2" high and 4" deep. It is built for one voltage, 120, 208 or 240V single phase, chosen when you order. It has no built-in switch: Hatco requires an RMB2-series remote control enclosure, ordered separately, and recommends mounting it 14" to 18" above the food.

Will it fit · Will it hook up

Outside size
24" W x 4" D x 2" H; 8 lb. shipping weight
Power
650 W, single phase: 120V 5.4 A, 208V 3.1 A or 240V 2.7 A; one voltage, set at order
Hookup
Hardwired; 6" leads on the server's right; no cord and plug option
Controls
No built-in controls; needs an RMB2-1R or RMB2-2R remote control enclosure, ordered separately
Mounting height
14" to 18" above the food, Hatco recommendation
Clearances
Non-combustible surroundings only: 12" to the surface below, 3" to the wall, 1" below an overshelf; no more than 10" back from the overshelf front

Order the voltage that matches your circuit. Hatco units are voltage-specific, so check the data plate before wiring.

Slim 2-inch profile

The housing is 2" high and 4" deep, so it tucks under shelves and keeps the food in view on buffet lines and in tight spaces.

Pre-focused heat

Glo-Ray pre-focused heat from a tubular metal-sheathed element holds serving temperatures longer without continuing to cook the food.

Max Watt output

This 24" model is rated 650 watts. Hatco recommends mounting max watt narrow heaters 14" to 18" above the food.

Stainless housing

GRNM models come in stainless steel only, with stainless 1.5" angle brackets. The narrow housing is 2" high and 4" deep, the same as the GRN and GRNH models.

Remote control required

All GRNM units run from a remote control enclosure. One RMB2 box can control several heaters (US and Canada). Install the box outside the heat zone.

Delivery and setup

  • Inspect the carton for damage before you sign, and note any damage on the delivery receipt.
  • A qualified electrician should make the hardwired connection to a grounded single-phase circuit that matches the voltage on the specification label.
  • Order the RMB2 remote control enclosure with the heater and mount it outside the heat zone, or damage will occur.
  • Manufacturing oils may smoke for up to 30 minutes at first startup. Run the heater without food until the smoke clears.
  • Clean daily once the unit is off and cool: wipe metal surfaces with a damp, non-abrasive cloth and dry them. Do not use jet spray, steam or excess water.

Questions buyers ask

What voltage and amperage does it need?

It runs on single-phase 120, 208 or 240V; the voltage is set when you order. At 650 watts it draws 120V 5.4 A, 208V 3.1 A or 240V 2.7 A.

Does it come with a switch?

No. GRNM units have no built-in controls and need a Hatco RMB2-1R or RMB2-2R series remote control enclosure, which is priced and ordered separately.

Can it plug into an outlet?

No. Hatco does not offer a cord and plug on GRNM models. It is hardwired through the 6" leads on the server's right.

Can I install it near wood or other combustibles?

No. Hatco requires non-combustible surroundings for GRNM heaters, with 12" to the surface below, 3" to the wall and 1" below an overshelf.

Is it available in colors?

No. GRNM models come in stainless steel only. Tubular stands for GRNM are also stainless steel only.

What warranty does it have?

Hatco's limited warranty runs 18 months from shipment or product registration, whichever is later. Hatco lists metal-sheathed food warmer elements at 1 year parts and labor plus 1 more year parts only. Register within 90 days of shipment.

650 WattsMax Watt metal-sheathed element.
24" x 4" x 2"Slim narrow housing.
120, 208 or 240VSingle phase, hardwired.
18-Month WarrantyHatco limited warranty.

Specs

Manufacturer Hatco
Model Number GRNM-24
Series Glo-Ray Narrow Infrared Strip Heaters
Type Max Watt Infrared Strip Heater
Shipping Weight 8 lb.
Width 24 Inches
Depth 4 Inches
Height 2 Inches
Voltage 120, 208 or 240 Volts
Phase 1
Wattage 650 Watts
Amps 5.4 at 120V3.1 at 208V2.7 at 240V
Voltage Selection One voltage per unit, specified at order
Connection Hardwired6 in. Leads on Server's Right
Element Tubular Metal-Sheathed Infrared
Recommended Mounting Height 14 to 18 Inches
Control Type Remote Control Enclosure Required, RMB2-1R or RMB2-2R SeriesNo Built-In Controls
Housing Stainless Steel
Mounting Stainless Steel 1.5 in. Angle Brackets
Minimum Clearances Non-Combustible Surroundings Only12 in. to Surface Below3 in. to Wall1 in. Below Overshelf
Factory Options Extended Leads 1 to 20 ft.14 or 16 in. Non-Adjustable Tubular Stands, Stainless
Certifications cULus, UL EPH Classified ANSI/NSF 4
Made In USA
Warranty 18 Months Limited
Warranty Details Repair or replacement of defective parts for 18 months from shipment or registration, whichever is later24/7 parts and service assistance in US and Canada
Element Coverage Metal-sheathed food warmer elements: 1 year parts and labor plus 1 additional year parts only

Certifications

cULus
UL EPH Classified ANSI/NSF 4

Payment & Security

Apple Pay Diners Club Discover Google Pay Mastercard Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

What Our Customers Say

Related Products

Recently viewed