Hatco GRNM-30 Glo-Ray Narrow Max Watt Infrared Strip Heater, 30" W, 825W, 120, 208 or 240V, Stainless
Description
A 30-inch, 2-inch-tall stainless strip heater with Max Watt output for buffet lines where the heater must stay out of sight.
The Hatco GRNM-30 is the Max Watt version of the Glo-Ray Narrow strip heater: 825 watts from a tubular metal-sheathed element in a stainless steel housing only 2" high and 4" deep. It is built for one voltage, 120, 208 or 240V single phase, chosen when you order. It has no built-in switch: Hatco requires an RMB2-series remote control enclosure, ordered separately, and recommends mounting it 14" to 18" above the food.
Will it fit · Will it hook up
- Outside size
- 30" W x 4" D x 2" H; 9 lb. shipping weight
- Power
- 825 W, single phase: 120V 6.9 A, 208V 4.0 A or 240V 3.4 A; one voltage, set at order
- Hookup
- Hardwired; 6" leads on the server's right; no cord and plug option
- Controls
- No built-in controls; needs an RMB2-1R or RMB2-2R remote control enclosure, ordered separately
- Mounting height
- 14" to 18" above the food, Hatco recommendation
- Clearances
- Non-combustible surroundings only: 12" to the surface below, 3" to the wall, 1" below an overshelf; no more than 10" back from the overshelf front
Order the voltage that matches your circuit. Hatco units are voltage-specific, so check the data plate before wiring.
Slim 2-inch profile
The housing is 2" high and 4" deep, so it tucks under shelves and keeps the food in view on buffet lines and in tight spaces.
Pre-focused heat
Glo-Ray pre-focused heat from a tubular metal-sheathed element holds serving temperatures longer without continuing to cook the food.
Max Watt output
This 30" model is rated 825 watts. Hatco recommends mounting max watt narrow heaters 14" to 18" above the food.
Stainless housing
GRNM models come in stainless steel only, with stainless 1.5" angle brackets. The narrow housing is 2" high and 4" deep, the same as the GRN and GRNH models.
Remote control required
All GRNM units run from a remote control enclosure. One RMB2 box can control several heaters (US and Canada). Install the box outside the heat zone.
Delivery and setup
- Inspect the carton for damage before you sign, and note any damage on the delivery receipt.
- A qualified electrician should make the hardwired connection to a grounded single-phase circuit that matches the voltage on the specification label.
- Order the RMB2 remote control enclosure with the heater and mount it outside the heat zone, or damage will occur.
- Manufacturing oils may smoke for up to 30 minutes at first startup. Run the heater without food until the smoke clears.
- Clean daily once the unit is off and cool: wipe metal surfaces with a damp, non-abrasive cloth and dry them. Do not use jet spray, steam or excess water.
Questions buyers ask
What voltage and amperage does it need?
It runs on single-phase 120, 208 or 240V; the voltage is set when you order. At 825 watts it draws 120V 6.9 A, 208V 4.0 A or 240V 3.4 A.
Does it come with a switch?
No. GRNM units have no built-in controls and need a Hatco RMB2-1R or RMB2-2R series remote control enclosure, which is priced and ordered separately.
Can it plug into an outlet?
No. Hatco does not offer a cord and plug on GRNM models. It is hardwired through the 6" leads on the server's right.
Can I install it near wood or other combustibles?
No. Hatco requires non-combustible surroundings for GRNM heaters, with 12" to the surface below, 3" to the wall and 1" below an overshelf.
Is it available in colors?
No. GRNM models come in stainless steel only. Tubular stands for GRNM are also stainless steel only.
What warranty does it have?
Hatco's limited warranty runs 18 months from shipment or product registration, whichever is later. Hatco lists metal-sheathed food warmer elements at 1 year parts and labor plus 1 more year parts only. Register within 90 days of shipment.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | GRNM-30 |
| Series | Glo-Ray Narrow Infrared Strip Heaters |
| Type | Max Watt Infrared Strip Heater |
| Shipping Weight | 9 lb. |
| Width | 30 Inches |
| Depth | 4 Inches |
| Height | 2 Inches |
| Voltage | 120, 208 or 240 Volts |
| Phase | 1 |
| Wattage | 825 Watts |
| Amps | 6.9 at 120V4.0 at 208V3.4 at 240V |
| Voltage Selection | One voltage per unit, specified at order |
| Connection | Hardwired6 in. Leads on Server's Right |
| Element | Tubular Metal-Sheathed Infrared |
| Recommended Mounting Height | 14 to 18 Inches |
| Control Type | Remote Control Enclosure Required, RMB2-1R or RMB2-2R SeriesNo Built-In Controls |
| Housing | Stainless Steel |
| Mounting | Stainless Steel 1.5 in. Angle Brackets |
| Minimum Clearances | Non-Combustible Surroundings Only12 in. to Surface Below3 in. to Wall1 in. Below Overshelf |
| Factory Options | Extended Leads 1 to 20 ft.14 or 16 in. Non-Adjustable Tubular Stands, Stainless |
| Certifications | cULus, UL EPH Classified ANSI/NSF 4 |
| Made In | USA |
| Warranty | 18 Months Limited |
| Warranty Details | Repair or replacement of defective parts for 18 months from shipment or registration, whichever is later24/7 parts and service assistance in US and Canada |
| Element Coverage | Metal-sheathed food warmer elements: 1 year parts and labor plus 1 additional year parts only |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What Our Customers Say

