Hatco GRS-36-H Glo-Ray Portable Heated Shelf, 36" W x 17-1/2" D, 450 W, 120V
Description
A 36-inch by 17.5-inch heated surface that keeps plated or packaged hot food warm at a pass, buffet or work counter.
The Hatco GRS-36-H Glo-Ray Portable Heated Shelf is a 36" wide, 17.5" deep heated shelf that holds preheated food at serving temperature. A blanket-type foil element under the stainless steel top spreads heat evenly, fiberglass insulation keeps the heat at the surface, and a built-in adjustable thermostat sets the surface from 80°F to 200°F. It sits on 4" legs, stands 5.38" high and plugs into a standard 120V outlet with its 6 ft. cord and NEMA 5-15P plug.
Will it fit · Will it hook up
- Outside size
- 36" W x 17.5" D x 5.38" H, height includes the 4" legs
- Power
- 120V single phase, 450 W, 3.8 A; 6 ft. cord with NEMA 5-15P plug at the center of the control side
- Clearance
- Keep at least 1" from combustible walls and materials; indoor use only, in a room of at least 70°F
- Counter
- Hatco recommends a metal countertop; other surfaces must handle prolonged temperatures up to 200°F
- NSF install
- NSF requires shelves 36" and wider to be sealed to the counter or raised on the 4" legs that come with it
Have a grounded 120V NEMA 5-15 receptacle within reach of the 6 ft. cord; the shelf draws 3.8 A.
Even blanket heat
A blanket-type foil element covers the whole underside of the surface for uniform heat across the shelf.
80°F to 200°F thermostat
A built-in adjustable thermostat sets the surface temperature. The power switch lights when the shelf is on, and it reaches operating temperature in about 30 minutes.
Insulated stainless top
A stainless steel top on an extruded aluminum base, with fiberglass insulation that keeps heat at the holding surface.
4-inch legs included
Shelves 36" and wider come with 4" adjustable legs, which lift the shelf for cleaning underneath as NSF requires when the unit is not sealed to the counter.
Designer colors
Clear anodized aluminum is standard. Warm Red, Black, Gray Granite, White Granite, Navy Blue, Hunter Green and Antique Copper frames are factory options with anti-microbial coating; the top surface is not painted.
Delivery and setup
- Inspect the carton for damage before you sign, and note any damage on the delivery receipt. Approximate shipping weight is 27 lb.
- Hatco ships the GRS fully assembled except for the legs. Install the supplied legs before use; do not lay the shelf on the side with the control panel.
- Use the 4" legs unless the shelf is sealed to the counter: NSF requires one or the other for units 36" and wider.
- Plug into a properly grounded 120V receptacle that matches the NEMA 5-15P plug. If the plug and receptacle do not match, have a qualified electrician install the right one.
- Place it away from exhaust hoods, air conditioning ducts and exterior doors, since moving air pulls heat off the surface.
Questions buyers ask
What outlet does it need?
A standard grounded 120V outlet. The shelf draws 450 W and 3.8 A, and comes with a 6 ft. cord and NEMA 5-15P plug.
How hot does it get?
The built-in thermostat adjusts the surface from 80°F to 200°F. Allow about 30 minutes to reach operating temperature, and put only food that is already heated to a safe temperature on the shelf.
Can it hold steam table pans?
Hatco rates pan capacity, and sells the accessory pan rail, for the 19.5" deep models only. This shelf is 17.5" deep, so check your pans, plates or packages against the 36" x 17.5" top.
Can I get it in a color?
Yes, at the time of purchase. Hatco offers Warm Red, Black, Gray Granite, White Granite, Navy Blue, Hunter Green and Antique Copper in place of the standard clear anodized finish. Non-standard colors are non-returnable.
What certifications does it have?
The spec sheet shows cULus, UL EPH Classified to ANSI/NSF 4, CE and UKCA marks. It is made in the USA.
What is the warranty?
Hatco covers defects in materials and workmanship for 18 months from shipment or from registration, whichever is later, by repair or replacement. Register within 90 days of shipment.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | GRS-36-H |
| Series | Glo-Ray Portable Heated Shelf GRS |
| Depth Code | H = 17.5 Inch Depth |
| Shipping Weight | 27 lb. |
| Width | 36 Inches |
| Depth | 17.5 Inches |
| Height | 5.38 Inches |
| Dimension Notes | Height Includes 4 Inch Legs |
| Voltage | 120 Volts |
| Phase | Single Phase |
| Wattage | 450 Watts |
| Amps | 3.8 Amps |
| Plug Type | NEMA 5-15P |
| Cord | 6 ft. Cord and Plug, Center of Side with Controls |
| Heating Element | Blanket-Type Foil Element |
| Temperature Range | 80°F to 200°F |
| Controls | Built-In Adjustable ThermostatIlluminated Power On/Off Switch |
| Top Surface | Stainless Steel |
| Base | Extruded Aluminum, Clear Anodized Standard |
| Insulation | Fiberglass |
| Legs | 4 Inch Adjustable Legs, Included |
| Factory Options | Designer Colors: Warm Red, Black, Gray Granite, White Granite, Navy Blue, Hunter Green, Antique CopperThermostat Guard |
| Accessories | Slant Leg KitThruShelf Kit for Mounting on a Wire Rack Shelf |
| Certifications | cULus, UL EPH Classified ANSI/NSF 4, CE, UKCA |
| NSF Installation | Seal to Counter or Raise on the Included 4 Inch Legs |
| Country of Origin | Made in USA |
| Warranty | 18 Month Hatco Limited Warranty |
| Warranty Details | Repair or replacement of defective parts for 18 months from shipment or registration, whichever is later24/7 parts and service assistance in US and Canada |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What Our Customers Say

