Hatco GRSB-54-I Glo-Ray Built-In Recessed Top Heated Shelf, 55-1/2" x 21", 120V 1,110W

Hatco GRSB-54-I Glo-Ray Built-In Recessed Top Heated Shelf, 55-1/2" x 21", 120V 1,110W

HatcoSKU: HAT-GRSB-54-I

Price:
Regular price$1,437.15
  • Warranty · 18 Months Limited

Secure checkout

Apple Pay Diners ClubDiscoverGoogle Pay Mastercard Shop Pay Visa

Talk to an equipment specialist

Mon–Sat 8 AM–5 PM ET

Questions about size, power, delivery or a quote for several units?

Call

Will it fit · Will it plug in

Outside (W × D × H)55.5" × 21" × 2.875"
Power120V · 1,110 W · 9.3 A · NEMA 5‑15P
Shipping weight40 lb.
ListedcULus, UL EPH Classified ANSI/NSF 4

Highlights

  • 55-1/2" W x 21" D x 2-7/8" H built-in recessed top heated shelf
  • 54" W x 19-1/2" D heated hardcoat aluminum surface with blanket-type element
  • 120V, 1,110 W, 9.3 A, 6 ft. cord with NEMA 5-15P plug
  • Adjustable thermostat and lighted power switch in the control box on a 36" conduit
  • Fits a 54-1/2" to 54-3/4" x 20" to 20-1/4" cutout, counters up to 1-1/4" thick
  • cULus and UL EPH Classified to ANSI/NSF 4, made in the USA

Specifications

ManufacturerHatco
Model NumberGRSB-54-I
SeriesGlo-Ray Built-In Rectangular Recessed Top Aluminum Heated Shelf GRSB
TypeBuilt-In Heated Shelf, Recessed Top
Shipping Weight40 lb.
Width55.5"
Depth21"
Height2.875"
Heated Area54" W x 19-1/2" D
Countertop Cutout54-1/2" to 54-3/4" W x 20" to 20-1/4" D
Countertop ThicknessUp to 1-1/4"
Voltage120V
PhaseSingle
Wattage1,110 Watts
Amps9.3 A
Plug TypeNEMA 5-15P
Cord6 ft. Cord and Plug Attached to Control Box
Control TypeAdjustable Thermostat, Lighted On/Off Rocker Switch
Control Box MountingUnder Unit or Semi-Remote on 36" Flexible Conduit, Panel, Surface, Under Counter or Recess Mount
SurfaceHardcoat Aluminum, 1/2" Recessed Top
Heating ElementBlanket-Type Foil Element
InsulationFiberglass
Mounting3/4" Flanged Edge with Z-Brackets, Metallic Countertop Recommended
Factory OptionsFlush Mount Thermostatic Control Box, Flush Mount ITC Electronic Control Box, 6 ft. or 10 ft. Conduit, ITC Box Only, Designer Color Bezel for Flush Mount Box
AccessoriesChannel Dividers GRSB-CD-54, Pair, Stainless Steel Rods GRSB-DIV-I, Each
CertificationscULus, UL EPH Classified ANSI/NSF 4
Made InUSA
Warranty18 Months Limited
Warranty DetailRepair or replacement of defective parts for 18 months from shipment or registration, whichever is later, 24/7 parts and service assistance in US and Canada

Resources & Documents

Specs

Manufacturer Hatco
Model Number GRSB-54-I
Series Glo-Ray Built-In Rectangular Recessed Top Aluminum Heated Shelf GRSB
Type Built-In Heated Shelf, Recessed Top
Shipping Weight 40 lb.
Width 55.5 Inches
Depth 21 Inches
Height 2.875 Inches
Heated Area 54" W x 19-1/2" D
Countertop Cutout 54-1/2" to 54-3/4" W x 20" to 20-1/4" D
Countertop Thickness Up to 1-1/4"
Voltage 120 Volts
Phase Single
Wattage 1,110 Watts
Amps 9.3 Amps
Plug Type NEMA 5-15P
Cord 6 ft. Cord and Plug Attached to Control Box
Control Type Adjustable ThermostatLighted On/Off Rocker Switch
Control Box Mounting Under Unit or Semi-Remote on 36" Flexible ConduitPanel, Surface, Under Counter or Recess Mount
Surface Hardcoat Aluminum, 1/2" Recessed Top
Heating Element Blanket-Type Foil Element
Insulation Fiberglass
Mounting 3/4" Flanged Edge with Z-BracketsMetallic Countertop Recommended
Factory Options Flush Mount Thermostatic Control BoxFlush Mount ITC Electronic Control Box6 ft. or 10 ft. Conduit, ITC Box OnlyDesigner Color Bezel for Flush Mount Box
Accessories Channel Dividers GRSB-CD-54, PairStainless Steel Rods GRSB-DIV-I, Each
Certifications cULus, UL EPH Classified ANSI/NSF 4
Made In USA
Warranty 18 Months Limited
Warranty Detail Repair or replacement of defective parts for 18 months from shipment or registration, whichever is later24/7 parts and service assistance in US and Canada

Certifications

cULus
UL EPH Classified ANSI/NSF 4
Call

Description

A built-in heated shelf with a 1/2" recessed top that keeps pans and platters hot at the pass or on the buffet line.

Hatco GRSB-54-I built-in recessed top heated shelf with control box, angled view

The Hatco GRSB-54-I is a Glo-Ray built-in heated shelf that drops into a 54-1/2" to 54-3/4" wide countertop opening. Its hardcoat aluminum top is recessed 1/2" below the flange, which keeps pans and platters in place on the heated surface. A blanket-type element under the whole surface spreads 1,110 W of heat evenly, and fiberglass insulation keeps it at the top. The control box with thermostat and lighted power switch hangs on a 36" conduit and plugs into 120V with a 6 ft. cord.

Will it fit · Will it hook up

Outside size
55-1/2" W x 21" D x 2-7/8" H including the 3/4" mounting flange
Counter cutout
54-1/2" to 54-3/4" W x 20" to 20-1/4" D; for countertops up to 1-1/4" thick
Heated area
54" W x 19-1/2" D
Power
120V, single phase, 1,110 W, 9.3 A; 120V cord and NEMA 5-15P plug on the control box
Control box
Mounted under the unit or semi-remote up to 36" away on the flexible conduit; keep it outside the heat zone
Counter material
Recommended for metallic countertops; other materials must be rated for 200°F

Measure the cutout carefully: Hatco allows only 1/4" of play, 54-1/2" to 54-3/4" wide.

Even heat, edge to edge

A blanket-type foil element covers the whole 54" W x 19-1/2" D heated area, so food holds at the same temperature across the shelf.

Hardcoat aluminum top

Hardcoat aluminum surface recessed 1/2" (13 mm) to keep pans and platters in place.

Adjustable thermostat

The control box has an adjustable thermostat and a lighted On/Off rocker switch. Hatco allows 30 minutes to reach operating temperature.

Fits in the counter

A 3/4" flanged edge sits on the countertop, and Z-brackets clamp the unit from below in counters up to 1-1/4" thick.

Works with strip heaters

Hatco says the next larger size GRA or GR2A strip heater fits over the shelf for heat from above and below.

Optional dividers

Notched stainless channel dividers (GRSB-CD-54) and stainless rods (GRSB-DIV-I) split the shelf into holding lanes.

Delivery and setup

  • Inspect the carton for damage before you sign, and note any damage on the delivery receipt.
  • Hatco ships it fully assembled with the control box, 36" conduit, 6 ft. cord and plug, and mounting Z-brackets.
  • Seal the flange to the counter with an NSF-approved sealant rated to at least 250°F, then tighten the Z-bracket screws until the flange lies flat.
  • Plug it into a grounded 120V receptacle that matches the NEMA 5-15P plug. If the plug and receptacle do not match, Hatco says to have a qualified electrician install the right one.
  • Keep it indoors at 70°F or warmer, away from fans, air ducts and exterior doors, and at least 1" from combustible walls.

Questions buyers ask

What size hole do I cut?

54-1/2" to 54-3/4" wide by 20" to 20-1/4" deep, in a countertop up to 1-1/4" thick.

What power does it need?

120V, single phase, 1,110 W, 9.3 A. It comes with a 6 ft. cord and NEMA 5-15P plug attached to the control box.

Can I mount the control box away from the shelf?

Yes. It can be mounted under the counter, on a surface or panel, or recessed, up to 36" from the unit on the standard conduit. Hatco also offers flush mount control boxes; 6 ft. and 10 ft. conduits work with the flush mount ITC box only.

Can I use it in a stone or wood counter?

Hatco recommends a metallic countertop. For other materials, confirm with the counter maker that the material is rated for long periods at 200°F. Hatco does not cover counter damage.

How do I clean it?

Turn it off, unplug it and let it cool, then wipe it with a damp non-abrasive cloth. Do not use a water jet or steam, and do not slide rough-bottomed pans across the hardcoat top.

What warranty does Hatco give?

Hatco repairs or replaces defective parts for 18 months from shipment or registration, whichever is later. Register within 90 days. 24/7 parts and service help is available in the US and Canada.

54" x 19-1/2" HeatedEven heat across the whole surface.
120V 1,110WCord and NEMA 5-15P plug included.
Built-In RecessedDrops into counters up to 1-1/4".
18-Month WarrantyParts repair or replacement per Hatco.

Specs

Manufacturer Hatco
Model Number GRSB-54-I
Series Glo-Ray Built-In Rectangular Recessed Top Aluminum Heated Shelf GRSB
Type Built-In Heated Shelf, Recessed Top
Shipping Weight 40 lb.
Width 55.5 Inches
Depth 21 Inches
Height 2.875 Inches
Heated Area 54" W x 19-1/2" D
Countertop Cutout 54-1/2" to 54-3/4" W x 20" to 20-1/4" D
Countertop Thickness Up to 1-1/4"
Voltage 120 Volts
Phase Single
Wattage 1,110 Watts
Amps 9.3 Amps
Plug Type NEMA 5-15P
Cord 6 ft. Cord and Plug Attached to Control Box
Control Type Adjustable ThermostatLighted On/Off Rocker Switch
Control Box Mounting Under Unit or Semi-Remote on 36" Flexible ConduitPanel, Surface, Under Counter or Recess Mount
Surface Hardcoat Aluminum, 1/2" Recessed Top
Heating Element Blanket-Type Foil Element
Insulation Fiberglass
Mounting 3/4" Flanged Edge with Z-BracketsMetallic Countertop Recommended
Factory Options Flush Mount Thermostatic Control BoxFlush Mount ITC Electronic Control Box6 ft. or 10 ft. Conduit, ITC Box OnlyDesigner Color Bezel for Flush Mount Box
Accessories Channel Dividers GRSB-CD-54, PairStainless Steel Rods GRSB-DIV-I, Each
Certifications cULus, UL EPH Classified ANSI/NSF 4
Made In USA
Warranty 18 Months Limited
Warranty Detail Repair or replacement of defective parts for 18 months from shipment or registration, whichever is later24/7 parts and service assistance in US and Canada

Certifications

cULus
UL EPH Classified ANSI/NSF 4

Payment & Security

Apple Pay Diners Club Discover Google Pay Mastercard Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

What Our Customers Say

Related Products

Recently viewed